这篇教程C++ softirq_count函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中softirq_count函数的典型用法代码示例。如果您正苦于以下问题：C++ softirq_count函数的具体用法？C++ softirq_count怎么用？C++ softirq_count使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了softirq_count函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: local_bh_enablevoid local_bh_enable(void){#ifdef CONFIG_TRACE_IRQFLAGS unsigned long flags; WARN_ON_ONCE(in_irq());#endif WARN_ON_ONCE(irqs_disabled());#ifdef CONFIG_TRACE_IRQFLAGS local_irq_save(flags);#endif /* * Are softirqs going to be turned on now: */ if (softirq_count() == SOFTIRQ_OFFSET) trace_softirqs_on((unsigned long)__builtin_return_address(0)); /* * Keep preemption disabled until we are done with * softirq processing: */ sub_preempt_count(SOFTIRQ_OFFSET - 1); if (unlikely(!in_interrupt() && local_softirq_pending())) do_softirq(); dec_preempt_count();#ifdef CONFIG_TRACE_IRQFLAGS local_irq_restore(flags);#endif preempt_check_resched();}
开发者ID:WiseMan787，项目名称:ralink_sdk，代码行数:32，
示例2: __local_bh_enable_ipvoid __local_bh_enable_ip(unsigned long ip, unsigned int cnt){ WARN_ON_ONCE(in_irq() || irqs_disabled());#ifdef CONFIG_TRACE_IRQFLAGS local_irq_disable();#endif /* * Are softirqs going to be turned on now: */ if (softirq_count() == SOFTIRQ_DISABLE_OFFSET) trace_softirqs_on(ip); /* * Keep preemption disabled until we are done with * softirq processing: */ preempt_count_sub(cnt - 1); if (unlikely(!in_interrupt() && local_softirq_pending())) { /* * Run softirq if any pending. And do it in its own stack * as we may be calling this deep in a task call stack already. */ do_softirq(); } preempt_count_dec();#ifdef CONFIG_TRACE_IRQFLAGS local_irq_enable();#endif preempt_check_resched();}
开发者ID:SutterCain，项目名称:linux-misc，代码行数:31，
示例3: ramster_check_irq_counts/* leave me here to see if it catches a weird crash */static void ramster_check_irq_counts(void){ static int last_hardirq_cnt, last_softirq_cnt, last_preempt_cnt; int cur_hardirq_cnt, cur_softirq_cnt, cur_preempt_cnt; cur_hardirq_cnt = hardirq_count() >> HARDIRQ_SHIFT; if (cur_hardirq_cnt > last_hardirq_cnt) { last_hardirq_cnt = cur_hardirq_cnt; if (!(last_hardirq_cnt&(last_hardirq_cnt-1))) pr_err("RAMSTER TESTING RRP hardirq_count=%d/n", last_hardirq_cnt); } cur_softirq_cnt = softirq_count() >> SOFTIRQ_SHIFT; if (cur_softirq_cnt > last_softirq_cnt) { last_softirq_cnt = cur_softirq_cnt; if (!(last_softirq_cnt&(last_softirq_cnt-1))) pr_err("RAMSTER TESTING RRP softirq_count=%d/n", last_softirq_cnt); } cur_preempt_cnt = preempt_count() & PREEMPT_MASK; if (cur_preempt_cnt > last_preempt_cnt) { last_preempt_cnt = cur_preempt_cnt; if (!(last_preempt_cnt&(last_preempt_cnt-1))) pr_err("RAMSTER TESTING RRP preempt_count=%d/n", last_preempt_cnt); }}
开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:28，
示例4: __local_bh_disable_ipvoid __local_bh_disable_ip(unsigned long ip, unsigned int cnt){ unsigned long flags; WARN_ON_ONCE(in_irq()); raw_local_irq_save(flags); /* * The preempt tracer hooks into preempt_count_add and will break * lockdep because it calls back into lockdep after SOFTIRQ_OFFSET * is set and before current->softirq_enabled is cleared. * We must manually increment preempt_count here and manually * call the trace_preempt_off later. */ __preempt_count_add(cnt); /* * Were softirqs turned off above: */ if (softirq_count() == (cnt & SOFTIRQ_MASK)) trace_softirqs_off(ip); raw_local_irq_restore(flags); if (preempt_count() == cnt) {#ifdef CONFIG_DEBUG_PREEMPT current->preempt_disable_ip = get_lock_parent_ip();#endif trace_preempt_off(CALLER_ADDR0, get_lock_parent_ip()); }}
开发者ID:h4ck3rm1k3，项目名称:linux，代码行数:29，
示例5: doteststatic void dotest(void (*testcase_fn)(void), int expected, int lockclass_mask){ unsigned long saved_preempt_count = preempt_count(); int expected_failure = 0;#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_DEBUG_RT_MUTEXES) int saved_lock_count = current->lock_count;#endif WARN_ON(irqs_disabled()); testcase_fn(); /* * Filter out expected failures: */#ifndef CONFIG_PROVE_LOCKING if ((lockclass_mask & LOCKTYPE_SPIN) && debug_locks != expected) expected_failure = 1; if ((lockclass_mask & LOCKTYPE_RWLOCK) && debug_locks != expected) expected_failure = 1; if ((lockclass_mask & LOCKTYPE_MUTEX) && debug_locks != expected) expected_failure = 1; if ((lockclass_mask & LOCKTYPE_RWSEM) && debug_locks != expected) expected_failure = 1;#endif if (debug_locks != expected) { if (expected_failure) { expected_testcase_failures++; printk("failed|"); } else { unexpected_testcase_failures++; printk("FAILED|"); dump_stack(); } } else { testcase_successes++; printk(" ok |"); } testcase_total++; if (debug_locks_verbose) printk(" lockclass mask: %x, debug_locks: %d, expected: %d/n", lockclass_mask, debug_locks, expected); /* * Some tests (e.g. double-unlock) might corrupt the preemption * count, so restore it: */ preempt_count() = saved_preempt_count;#ifdef CONFIG_TRACE_IRQFLAGS if (softirq_count()) current->softirqs_enabled = 0; else current->softirqs_enabled = 1;#endif reset_locks();#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_DEBUG_RT_MUTEXES) current->lock_count = saved_lock_count;#endif}
开发者ID:mrtos，项目名称:Logitech-Revue，代码行数:60，
示例6: _local_bh_enable_ipstatic inline void _local_bh_enable_ip(unsigned long ip){ WARN_ON_ONCE(in_irq() || irqs_disabled());#ifdef CONFIG_TRACE_IRQFLAGS local_irq_disable();#endif /* * Are softirqs going to be turned on now: */ if (softirq_count() == SOFTIRQ_DISABLE_OFFSET) trace_softirqs_on(ip); /* * Keep preemption disabled until we are done with * softirq processing: */ sub_preempt_count(SOFTIRQ_DISABLE_OFFSET - 1); if (unlikely(!in_interrupt() && local_softirq_pending())) do_softirq(); dec_preempt_count();#ifdef CONFIG_TRACE_IRQFLAGS local_irq_enable();#endif preempt_check_resched();}
开发者ID:adyjl，项目名称:DORIMANX_LG_STOCK_LP_KERNEL，代码行数:26，
示例7: __local_bh_disablestatic void __local_bh_disable(unsigned long ip, unsigned int cnt){ unsigned long flags; WARN_ON_ONCE(in_irq()); raw_local_irq_save(flags); /* * The preempt tracer hooks into add_preempt_count and will break * lockdep because it calls back into lockdep after SOFTIRQ_OFFSET * is set and before current->softirq_enabled is cleared. * We must manually increment preempt_count here and manually * call the trace_preempt_off later. */ add_preempt_count_notrace(cnt); /* * Were softirqs turned off above: */ if (softirq_count() == cnt) trace_softirqs_off(ip); raw_local_irq_restore(flags); if (preempt_count() == cnt) trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));}
开发者ID:adyjl，项目名称:DORIMANX_LG_STOCK_LP_KERNEL，代码行数:25，
示例8: __local_bh_enablestatic void __local_bh_enable(unsigned int cnt){ WARN_ON_ONCE(!irqs_disabled()); if (softirq_count() == (cnt & SOFTIRQ_MASK)) trace_softirqs_on(_RET_IP_); preempt_count_sub(cnt);}
开发者ID:SutterCain，项目名称:linux-misc，代码行数:8，
示例9: _local_bh_enable/* * Special-case - softirqs can safely be enabled in * cond_resched_softirq(), or by __do_softirq(), * without processing still-pending softirqs: */void _local_bh_enable(void){ WARN_ON_ONCE(in_irq()); WARN_ON_ONCE(!irqs_disabled()); if (softirq_count() == SOFTIRQ_OFFSET) trace_softirqs_on((unsigned long)__builtin_return_address(0)); sub_preempt_count(SOFTIRQ_OFFSET);}
开发者ID:WiseMan787，项目名称:ralink_sdk，代码行数:14，
示例10: __local_bh_enablestatic void __local_bh_enable(unsigned int cnt){ WARN_ON_ONCE(in_irq()); WARN_ON_ONCE(!irqs_disabled()); if (softirq_count() == cnt) trace_softirqs_on((unsigned long)__builtin_return_address(0)); sub_preempt_count(cnt);}
开发者ID:adyjl，项目名称:DORIMANX_LG_STOCK_LP_KERNEL，代码行数:9，
示例11: _local_bh_enable/* * Special-case - softirqs can safely be enabled in * cond_resched_softirq(), or by __do_softirq(), * without processing still-pending softirqs: */void _local_bh_enable(void){#ifdef CONFIG_TRACE_IRQFLAGS WARN_ON_ONCE(in_irq());#endif WARN_ON_ONCE(!irqs_disabled()); if (softirq_count() == SOFTIRQ_OFFSET) trace_softirqs_on((unsigned long)__builtin_return_address(0)); sub_preempt_count(SOFTIRQ_OFFSET);}
开发者ID:Mr-Aloof，项目名称:wl500g，代码行数:16，
示例12: __local_bh_enablevoid __local_bh_enable(void){ WARN_ON_ONCE(in_irq()); /* * softirqs should never be enabled by __local_bh_enable(), * it always nests inside local_bh_enable() sections: */ WARN_ON_ONCE(softirq_count() == SOFTIRQ_OFFSET); sub_preempt_count(SOFTIRQ_OFFSET);}
开发者ID:WiseMan787，项目名称:ralink_sdk，代码行数:12，
示例13: __local_bh_disablestatic void __local_bh_disable(unsigned long ip){ unsigned long flags; WARN_ON_ONCE(in_irq()); raw_local_irq_save(flags); add_preempt_count(SOFTIRQ_OFFSET); /* * Were softirqs turned off above: */ if (softirq_count() == SOFTIRQ_OFFSET) trace_softirqs_off(ip); raw_local_irq_restore(flags);}
开发者ID:Mr-Aloof，项目名称:wl500g，代码行数:15，
示例14: doteststatic void dotest(void (*testcase_fn)(void), int expected, int lockclass_mask){ unsigned long saved_preempt_count = preempt_count(); int expected_failure = 0; WARN_ON(irqs_disabled()); testcase_fn();#ifndef CONFIG_PROVE_LOCKING if ((lockclass_mask & LOCKTYPE_SPIN) && debug_locks != expected) expected_failure = 1; if ((lockclass_mask & LOCKTYPE_RWLOCK) && debug_locks != expected) expected_failure = 1; if ((lockclass_mask & LOCKTYPE_MUTEX) && debug_locks != expected) expected_failure = 1; if ((lockclass_mask & LOCKTYPE_RWSEM) && debug_locks != expected) expected_failure = 1;#endif if (debug_locks != expected) { if (expected_failure) { expected_testcase_failures++; printk("failed|"); } else { unexpected_testcase_failures++; printk("FAILED|"); dump_stack(); } } else { testcase_successes++; printk(" ok |"); } testcase_total++; if (debug_locks_verbose) printk(" lockclass mask: %x, debug_locks: %d, expected: %d/n", lockclass_mask, debug_locks, expected); preempt_count() = saved_preempt_count;#ifdef CONFIG_TRACE_IRQFLAGS if (softirq_count()) current->softirqs_enabled = 0; else current->softirqs_enabled = 1;#endif reset_locks();}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:47，
示例15: do_softirqasmlinkage void do_softirq(void){ __u32 pending; unsigned long flags; if (in_interrupt()) return; local_irq_save(flags); pending = local_softirq_pending(); /* Switch to interrupt stack */ if (pending) { call_softirq(); WARN_ON_ONCE(softirq_count()); } local_irq_restore(flags);}
开发者ID:Einheri，项目名称:wl500g，代码行数:17，
示例16: doteststatic void dotest(void (*testcase_fn)(void), int expected, int lockclass_mask){ unsigned long saved_preempt_count = preempt_count(); WARN_ON(irqs_disabled()); testcase_fn(); /* * Filter out expected failures: */#ifndef CONFIG_PROVE_LOCKING if (expected == FAILURE && debug_locks) { expected_testcase_failures++; pr_cont("failed|"); } else#endif if (debug_locks != expected) { unexpected_testcase_failures++; pr_cont("FAILED|"); dump_stack(); } else { testcase_successes++; pr_cont(" ok |"); } testcase_total++; if (debug_locks_verbose) pr_cont(" lockclass mask: %x, debug_locks: %d, expected: %d/n", lockclass_mask, debug_locks, expected); /* * Some tests (e.g. double-unlock) might corrupt the preemption * count, so restore it: */ preempt_count_set(saved_preempt_count);#ifdef CONFIG_TRACE_IRQFLAGS if (softirq_count()) current->softirqs_enabled = 0; else current->softirqs_enabled = 1;#endif reset_locks();}
开发者ID:AshishNamdev，项目名称:linux，代码行数:45，
注：本文中的softirq_count函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ softpipe_context函数代码示例
C++ softfloat_raiseFlags函数代码示例 |
