这篇教程C++ timer_init函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中timer_init函数的典型用法代码示例。如果您正苦于以下问题：C++ timer_init函数的具体用法？C++ timer_init怎么用？C++ timer_init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了timer_init函数的28个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: bench_mainint bench_main(int argc, char *argv[]){ double tmin = 0.0; double tol; int repeat = 0; int rounds = 10; int iarounds = 0; int arounds = 1; /* this is too low for precise results */ int c; report = report_verbose; /* default */ verbose = 0; tol = SINGLE_PRECISION ? 1.0e-3 : (QUAD_PRECISION ? 1e-29 : 1.0e-10); main_init(&argc, &argv); bench_srand(1); while ((c = my_getopt (argc, argv, options)) != -1) { switch (c) { case 't' : tmin = strtod(my_optarg, 0); break; case 'r': repeat = atoi(my_optarg); break; case 's': timer_init(tmin, repeat); speed(my_optarg, 0); break; case 'S': timer_init(tmin, repeat); speed(my_optarg, 1); break; case 'd': report_can_do(my_optarg); break; case 'o': useropt(my_optarg); break; case 'v': if (verbose >= 0) { /* verbose < 0 disables output */ if (my_optarg) verbose = atoi(my_optarg); else ++verbose; } break; case 'y': verify(my_optarg, rounds, tol); break; case 'a': accuracy(my_optarg, arounds, iarounds); break; case 'i': report_info(my_optarg); break; case 'I': report_info_all(); break; case 'h': if (verbose >= 0) my_usage(argv[0], options); break; case 300: /* --report-mflops */ report = report_mflops; break; case 310: /* --report-time */ report = report_time; break; case 320: /* --report-benchmark */ report = report_benchmark; break; case 330: /* --report-verbose */ report = report_verbose; break; case 400: /* --print-time-min */ timer_init(tmin, repeat); ovtpvt("%g/n", time_min); break; case 401: /* --verify-rounds */ rounds = atoi(my_optarg); break; case 402: /* --print-precision */ if (SINGLE_PRECISION) ovtpvt("single/n"); else if (QUAD_PRECISION) ovtpvt("quad/n"); else if (LDOUBLE_PRECISION) ovtpvt("long-double/n"); else if (DOUBLE_PRECISION) ovtpvt("double/n"); else //.........这里部分代码省略.........
开发者ID:376473984，项目名称:fftw3，代码行数:101，
示例2: mainvoid main(void){ u32 rootfs; char *rfs_txt; u32 image = 0; struct jffs2_raw_inode *node, *mfg_node; char *cmdline = 0, *altcmdline = 0; u32 kernel_nand_addr = 0, alt_kernel_nand_addr = 0; int board_id; int done = 0; u32 ret = 0;#ifdef CPU_LF1000 /* disable the USB controller */ BIT_SET(REG16(LF1000_UDC_BASE+UDC_PCR), PCE);#endif adc_init(); board_id = load_board_id(); display_backlight(board_id); clock_init(); db_init(); display_init(); fbcon_init(); db_displaytee(1); db_puts("************************************************/n"); db_puts("* */n"); db_puts("* OpenDidj lightning-boot 1.1 / 12 Mar 2010 */n"); db_puts("* */n"); db_puts("************************************************/n"); db_puts("/n/n"); #ifdef CONFIG_MACH_LF_LF1000 /* now that backlight is on, see if we have enough battery to boot */ if(gpio_get_val(LOW_BATT_PORT, LOW_BATT_PIN) == 0 && ADC_TO_MV(adc_get_reading(LF1000_ADC_VBATSENSE)) < BOOT_MIN_MV){ db_puts("PANIC: battery voltage too low!/n"); die(); }#endif /* CONFIG_MACH_LF_LF1000 */#ifdef UBOOT_SUPPORT if(((REG32(LF1000_GPIO_BASE+GPIOCPAD) & BUTTON_MSK) == BUTTON_MSK)) { do { db_puts("xmodem download mode/n"); timer_init(); offset = 0; xmodemInit(db_putchar,db_getc_async); tmr_poll_start(2000); db_puts("Switch to 115200 baud and press any button/n"); db_puts("to start XModem download.../n"); /* set the baud rate */#define UART16(r) REG16(LF1000_SYS_UART_BASE+r) UART16(BRD) = 1; /* FIXME (for now "1" sets 115200 baud , "11" sets 19200 baud) */ UART16(UARTCLKGEN) = ((UARTDIV-1)<<UARTCLKDIV)|(UART_PLL<<UARTCLKSRCSEL); if(tfs_load_summary(sum_buffer, BOOT0_ADDR) != 0) { db_puts("trying BOOT1/n"); if(tfs_load_summary(sum_buffer, BOOT1_ADDR)) { db_puts("u-boot not found/n"); break; } } while (!done) { if (tmr_poll_has_expired()){ if(((REG32(LF1000_GPIO_BASE+GPIOCPAD) & BUTTON_MSK) != BUTTON_MSK)) { db_displaytee(0); ret = xmodemReceive(ubcopy); db_displaytee(1); if ( ret >= 0 ) break; } if (ret == -1) db_puts("XMODEM_ERROR : REMOTECANCEL/n"); if (ret == -2) db_puts("XMODEM_ERROR : OUTOFSYNC/n"); if (ret == -3) db_puts("XMODEM_ERROR : RETRYEXCEED/n"); if ( ret < 0 ) continue; /* db_puts("Loaded : "); db_int(ret); db_puts("bytes/n"); */ } } db_puts("/n/nXModem download complete./n"); db_puts("Transferring control to U-Boot./n"); /* jump to u-boot */ ((void (*)( int r0, int r1, int r2))UBOOT_ADDR) (0, MACH_TYPE_LF1000, 0); /* never get here! */ die(); } while(0);//.........这里部分代码省略.........
开发者ID:BackupTheBerlios，项目名称:opendidj，代码行数:101，
示例3: HariMainvoid HariMain(void){ int i; struct BOOTINFO *binfo = (struct BOOTINFO *)0x0ff0; int xsize = (*binfo).scrnx; int ysize = (*binfo).scrny; char *vram = (*binfo).vram; char msg[40], mcursor[256]; int mx = xsize/2; int my = ysize/2; int fifobuf[128]; struct MOUSE_DEC mdec; unsigned char s[32]; unsigned int memtotal, count = 0; struct MEMMAN *memman = (struct MEMMAN *)MEMMAN_ADDR; int cursor_x, cursor_c; struct SHTCTL *shtctl; struct SHEET *sht_back, *sht_mouse, *sht_win; unsigned char *buf_back, buf_mouse[256], *buf_win; struct TIMER *timer1, *timer2, *timer3; struct FIFO32 fifo; static char keytable[0x54] = { 0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0, 0, 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0, 0, 'A', 'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V', 'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1', '2', '3', '0', '.' }; init_gdtidt (); init_pic (); io_sti (); fifo32_init(&fifo, 32, fifobuf); init_pit(); io_out8(PIC0_IMR, 0xf8); /* Allow PIT and Keyboard (11111000) */ io_out8(PIC1_IMR, 0xef); /* Allow Mouse (11101111) */ init_keyboard (&fifo, 256); enable_mouse (&fifo, 512, &mdec); timer1 = timer_alloc(); timer_init(timer1, &fifo, 10); timer_settime(timer1, 1000); timer2 = timer_alloc(); timer_init(timer2, &fifo, 3); timer_settime(timer2, 300); timer3 = timer_alloc(); timer_init(timer3, &fifo, 1); timer_settime(timer3, 50); memtotal = memtest(0x00400000, 0xbfffffff); memman_init (memman); memman_free (memman, 0x00001000, 0x009e000); /* 0x00001000 - 0x0009efff */ memman_free (memman, 0x00400000, memtotal - 0x00400000); init_pallete(); shtctl = shtctl_init (memman, binfo->vram, binfo->scrnx, binfo->scrny); sht_back = sheet_alloc(shtctl); sht_mouse = sheet_alloc(shtctl); sht_win = sheet_alloc(shtctl); buf_back = (unsigned char *)memman_alloc_4k (memman, binfo->scrnx * binfo->scrny); buf_win = (unsigned char *)memman_alloc_4k (memman, 160 * 52); sheet_setbuf (sht_back, buf_back, binfo->scrnx, binfo->scrny, -1); sheet_setbuf (sht_mouse, buf_mouse, 16, 16, 99); sheet_setbuf (sht_win, buf_win, 160, 52, -1); init_screen (buf_back, xsize, ysize); init_mouse_cursor8 (buf_mouse, 99); make_window8(buf_win, 160, 52, "counter"); sprintf (s, "(%d, %d)", mx, my); putfonts8_asc (buf_back, binfo->scrnx, 0, 0, COL8_FFFFFF, s); sprintf (s, "Memory %dMB, free : %dKB", memtotal / (1024 * 1024), memman_total(memman) / 1024); putfonts8_asc(buf_back, binfo->scrnx, 0, 32, COL8_FFFFFF, s); make_textbox8 (sht_win, 8, 28, 144, 16, COL8_FFFFFF); cursor_x = 8; cursor_c = COL8_FFFFFF; sheet_slide (sht_back, 0, 0); sheet_slide (sht_mouse, mx, my); sheet_slide (sht_win, 80, 72); sheet_updown (sht_back, 0); sheet_updown (sht_win, 1); sheet_updown (sht_mouse, 2); sheet_refresh (sht_back, 0, 0, binfo->scrnx, 48); //===================== // Task Settings //===================== struct TSS32 tas_a, tas_b;//.........这里部分代码省略.........
开发者ID:msyksphinz，项目名称:sicp_exercise，代码行数:101，
示例4: mainint main(int argc,char *argv[]){ vm_instance_t *vm;#ifdef PROFILE atexit(profiler_savestat);#endif printf("Cisco Router Simulation Platform (version %s)/n",sw_version); printf("Copyright (c) 2005-2007 Christophe Fillot./n"); printf("Build date: %s %s/n/n",__DATE__,__TIME__); /* Register platforms */ register_default_platforms(); /* Initialize timers */ timer_init(); /* Initialize object registry */ registry_init(); /* Initialize ATM module (for HEC checksums) */ atm_init(); /* Initialize CRC functions */ crc_init(); /* Initialize NetIO code */ netio_rxl_init(); /* Initialize NetIO packet filters */ netio_filter_load_all(); /* Initialize VTTY code */ vtty_init(); /* Parse standard command line */ if (!run_hypervisor(argc,argv)) parse_std_cmd_line(argc,argv); /* Create general log file */ create_log_file(); /* Periodic tasks initialization */ if (ptask_init(0) == -1) exit(EXIT_FAILURE); /* Create instruction lookup tables */ mips64_jit_create_ilt(); mips64_exec_create_ilt(); ppc32_jit_create_ilt(); ppc32_exec_create_ilt(); setup_signals(); if (!hypervisor_mode) { /* Initialize the default instance */ vm = vm_acquire("default"); assert(vm != NULL); if (vm->platform->init_instance(vm) == -1) { fprintf(stderr,"Unable to initialize router instance./n"); exit(EXIT_FAILURE); } /* Start GDB server before the image to allow debugging from the begining of it's execution */ if (vm->gdb_server_running) { /* Stop main CPU */ vm_suspend(vm);// cpu_stop(vm->boot_cpu); if (gdb_server_start_listener(vm) < 0) { fprintf(stderr,"GDB server unable to create TCP sockets./n"); exit(EXIT_FAILURE); } }#if (DEBUG_INSN_PERF_CNT > 0) || (DEBUG_BLOCK_PERF_CNT > 0) { m_uint32_t counter,prev = 0,delta; while(vm->status == VM_STATUS_RUNNING) { counter = cpu_get_perf_counter(vm->boot_cpu); delta = counter - prev; prev = counter; printf("delta = %u/n",delta); sleep(1); } }#else /* Start instance monitoring */ vm_monitor(vm);#endif // FIXME: remove this kludge if (vm->gdb_server_running) { //while (vm->gdb_conn->active) // usleep(1000000);//.........这里部分代码省略.........
开发者ID:Groundworkstech，项目名称:dynamips-gdb-mod，代码行数:101，
示例5: HariMainvoid HariMain(void){ struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO; struct SHTCTL *shtctl; char s[40]; struct FIFO32 fifo, keycmd; int fifobuf[128], keycmd_buf[32]; int mx, my, i, cursor_x, cursor_c; unsigned int memtotal; struct MOUSE_DEC mdec; struct MEMMAN *memman = (struct MEMMAN *) MEMMAN_ADDR; unsigned char *buf_back, buf_mouse[256], *buf_win, *buf_cons; struct SHEET *sht_back, *sht_mouse, *sht_win, *sht_cons; struct TASK *task_a, *task_cons; struct TIMER *timer; static char keytable0[0x80] = { 0, 0, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '^', 0, 0, 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '@', '[', 0, 0, 'A', 'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', ';', ':', 0, 0, ']', 'Z', 'X', 'C', 'V', 'B', 'N', 'M', ',', '.', '/', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1', '2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x5c, 0, 0 }; static char keytable1[0x80] = { 0, 0, '!', 0x22, '#', '$', '%', '&', 0x27, '(', ')', '~', '=', '~', 0, 0, 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '`', '{', 0, 0, 'A', 'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', '+', '*', 0, 0, '}', 'Z', 'X', 'C', 'V', 'B', 'N', 'M', '<', '>', '?', 0, '*', 0, ' ', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, '7', '8', '9', '-', '4', '5', '6', '+', '1', '2', '3', '0', '.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, '_', 0, 0, 0, 0, 0, 0, 0, 0, 0, '|', 0, 0 }; int key_to = 0, key_shift = 0, key_leds = (binfo->leds >> 4) & 7, keycmd_wait = -1; init_gdtidt(); init_pic(); io_sti(); /* IDT/PICの初期化が
C++ timer_irq_handler函数代码示例
C++ timer_get_fixed_seconds函数代码示例
|
