这篇教程C++ u8g_WriteByte函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中u8g_WriteByte函数的典型用法代码示例。如果您正苦于以下问题：C++ u8g_WriteByte函数的具体用法？C++ u8g_WriteByte怎么用？C++ u8g_WriteByte使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了u8g_WriteByte函数的23个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: u8g_dev_ssd1325_gr_prepare_rowstatic void u8g_dev_ssd1325_gr_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row){ uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page; row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height; row += delta_row; u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq); u8g_WriteByte(u8g, dev, row); /* start at the selected row */ u8g_WriteByte(u8g, dev, row+1); /* end within the selected row */ //u8g_SetAddress(u8g, dev, 0); /* instruction mode mode */ //u8g_WriteByte(u8g, dev, 0x05c); /* write to ram */ u8g_SetAddress(u8g, dev, 1); /* data mode */}
开发者ID:whdlgp，项目名称:Cupdrone_for_cpp，代码行数:16，
示例2: u8g_dev_ssd1327_96x96_2x_gr_fnuint8_t u8g_dev_ssd1327_96x96_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_dev_ssd1327_2bit_2x_prepare_page(u8g, dev, 0); u8g_dev_ssd1327_2bit_2x_write_buffer(u8g, dev, 0); u8g_dev_ssd1327_2bit_2x_prepare_page(u8g, dev, 1); u8g_dev_ssd1327_2bit_2x_write_buffer(u8g, dev, 1); u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); u8g_SetChipSelect(u8g, dev, 0); return 1; } return u8g_dev_pb16v2_base_fn(u8g, dev, msg, arg);}
开发者ID:02047788a，项目名称:Marlin，代码行数:29，
示例3: u8g_dev_ssd1306_128x32_fnuint8_t u8g_dev_ssd1306_128x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start); u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (SSD1306) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) return 0; u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); return 1;} return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);}
开发者ID:02047788a，项目名称:Marlin，代码行数:31，
示例4: u8g_dev_ssd1327_2bit_2x_prepare_pagestatic void u8g_dev_ssd1327_2bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd){ uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page; u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1327_2bit_96x96_prepare_page_seq); page <<= 1; page += is_odd; page <<= 2; u8g_WriteByte(u8g, dev, page); /* start at the selected page */ page += 3; u8g_WriteByte(u8g, dev, page); /* end within the selected page */ u8g_SetAddress(u8g, dev, 1); /* data mode */}
开发者ID:02047788a，项目名称:Marlin，代码行数:16，
示例5: u8g_dev_st7920_128x64_fnuint8_t u8g_dev_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7920_128x64_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { uint8_t y, i; uint8_t *ptr; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_SetAddress(u8g, dev, 0); /* cmd mode */ u8g_SetChipSelect(u8g, dev, 1); y = pb->p.page_y0; ptr = pb->buf; for( i = 0; i < 8; i ++ ) { u8g_SetAddress(u8g, dev, 0); /* cmd mode */ u8g_WriteByte(u8g, dev, 0x03e ); /* enable extended mode */ if ( y < 32 ) { u8g_WriteByte(u8g, dev, 0x080 | y ); /* y pos */ u8g_WriteByte(u8g, dev, 0x080 ); /* set x pos to 0*/ } else { u8g_WriteByte(u8g, dev, 0x080 | (y-32) ); /* y pos */ u8g_WriteByte(u8g, dev, 0x080 | 8); /* set x pos to 64*/ } u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, WIDTH/8, ptr); ptr += WIDTH/8; y++; } u8g_SetChipSelect(u8g, dev, 0); } break; } return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);}
开发者ID:robert-budde，项目名称:LandLord，代码行数:47，
示例6: u8g_dev_uc1610_dogxl160_gx_bw_fnuint8_t u8g_dev_uc1610_dogxl160_gx_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq); break; case U8G_DEV_MSG_STOP: u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_stop_seq); break; case U8G_DEV_MSG_PAGE_NEXT: { int i, g; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); for(g=0;(g<PAGEGROUP)&&(g<(HEIGHT/8));g++){ u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*2*PAGEGROUP+g*2) ); /* select current page 1/2 (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ for( i = 0; i < WIDTH; i++ ) { u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf+WIDTH*g))[i] ) ); } u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*2*PAGEGROUP+1+g*2) ); /* select current page 2/2 (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ for( i = 0; i < WIDTH; i++ ) { u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf+WIDTH*g))[i] >> 4 ) ); } } u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); u8g_SetChipSelect(u8g, dev, 0); return 1; } return u8g_dev_pb8xv1_base_fn(u8g, dev, msg, arg);}
开发者ID:88kacper8，项目名称:u8glib，代码行数:46，
示例7: u8g_dev_uc1610_dogxl160_2x_bw_fnuint8_t u8g_dev_uc1610_dogxl160_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { int i; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4) ); /* select current page 1/2 (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ for( i = 0; i < WIDTH; i++ ) { u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf))[i] ) ); } u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4+1) ); /* select current page 2/2 (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ for( i = 0; i < WIDTH; i++ ) { u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf))[i] >> 4 ) ); } u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4+2) ); /* select current page 1/2 (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ for( i = 0; i < WIDTH; i++ ) { u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)((uint8_t *)(pb->buf)+WIDTH))[i] ) ); } u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4+3) ); /* select current page 2/2 (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ for( i = 0; i < WIDTH; i++ ) { u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)((uint8_t *)(pb->buf)+WIDTH))[i] >> 4 ) ); } u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); u8g_SetChipSelect(u8g, dev, 0); return 1; } return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);}
开发者ID:pkourany，项目名称:u8glibSpark，代码行数:60，
示例8: u8g_dev_t6963_240x128_fnuint8_t u8g_dev_t6963_240x128_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_t6963_240x128_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { uint8_t y, i; uint16_t disp_ram_adr; uint8_t *ptr; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_SetAddress(u8g, dev, 0); /* data mode */ u8g_SetChipSelect(u8g, dev, 1); y = pb->p.page_y0; ptr = pb->buf; disp_ram_adr = WIDTH/8; disp_ram_adr *= y; for( i = 0; i < PAGE_HEIGHT; i ++ ) { u8g_SetAddress(u8g, dev, 0); /* data mode */ u8g_WriteByte(u8g, dev, disp_ram_adr&255 ); /* address low byte */ u8g_WriteByte(u8g, dev, disp_ram_adr>>8 ); /* address hight byte */ u8g_SetAddress(u8g, dev, 1); /* cmd mode */ u8g_WriteByte(u8g, dev, 0x024 ); /* set adr ptr */ u8g_WriteSequence(u8g, dev, WIDTH/8, ptr); ptr += WIDTH/8; disp_ram_adr += WIDTH/8; } u8g_SetAddress(u8g, dev, 0); /* data mode */ u8g_SetChipSelect(u8g, dev, 0); } break; } return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);}
开发者ID:azad26195，项目名称:marlin-based-ace-firmware，代码行数:44，
示例9: u8g_dev_st7565_lm6059_2x_fnuint8_t u8g_dev_st7565_lm6059_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start); u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, pb->width, pb->buf); u8g_SetChipSelect(u8g, dev, 0); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start); u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); u8g_SetChipSelect(u8g, dev, 0); return 1; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_off); return 1; } return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);}
开发者ID:whdlgp，项目名称:Cupdrone_for_cpp，代码行数:43，
示例10: u8g_dev_uc1610_dogxl160_2x_gr_fnuint8_t u8g_dev_uc1610_dogxl160_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq); break; case U8G_DEV_MSG_STOP: u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_stop_seq); break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*2) ); /* select current page (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ if ( u8g_WriteSequence(u8g, dev, WIDTH, pb->buf) == 0 ) return 0; u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start); u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*2+1) ); /* select current page (UC1610) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ if ( u8g_WriteSequence(u8g, dev, WIDTH, pb->buf+WIDTH) == 0 ) return 0; u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); u8g_SetChipSelect(u8g, dev, 0); return 1; } return u8g_dev_pb16v2_base_fn(u8g, dev, msg, arg);}
开发者ID:88kacper8，项目名称:u8glib，代码行数:40，
示例11: u8g_dev_ld7032_60x32_fnuint8_t u8g_dev_ld7032_60x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_data_start); u8g_WriteByte(u8g, dev, pb->p.page_y0); /* y start */ u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x008); u8g_SetAddress(u8g, dev, 1); /* data mode */ if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) return 0; u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2); u8g_SetChipSelect(u8g, dev, 0); return 1; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ld7032_60x32_sleep_off); return 1; } return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);}
开发者ID:7134956，项目名称:u8glib，代码行数:39，
示例12: u8g_dev_sbn1661_122x32_fnuint8_t u8g_dev_sbn1661_122x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE); u8g_WriteEscSeqP(u8g, dev, u8g_dev_sbn1661_122x32_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_SetAddress(u8g, dev, 0); /* command mode */ u8g_SetChipSelect(u8g, dev, 1); u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */ u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, WIDTH/2, pb->buf); u8g_SetAddress(u8g, dev, 0); /* command mode */ u8g_SetChipSelect(u8g, dev, 2); u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */ u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, WIDTH/2, WIDTH/2+(uint8_t *)pb->buf); u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: break; } return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);}
开发者ID:korytov，项目名称:bone，代码行数:37，
示例13: u8g_dev_ks0108_128x64_fnuint8_t u8g_dev_ks0108_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ks0108_128x64_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_SetAddress(u8g, dev, 0); /* command mode */ u8g_SetChipSelect(u8g, dev, 2); u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (KS0108b) */ u8g_WriteByte(u8g, dev, 0x040 ); /* set address 0 */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, 64, pb->buf); u8g_SetChipSelect(u8g, dev, 0); u8g_SetAddress(u8g, dev, 0); /* command mode */ u8g_SetChipSelect(u8g, dev, 1); u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (KS0108b) */ u8g_WriteByte(u8g, dev, 0x040 ); /* set address 0 */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, 64, 64+(uint8_t *)pb->buf); u8g_SetChipSelect(u8g, dev, 0); } break; } return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);}
开发者ID:azad26195，项目名称:marlin-based-ace-firmware，代码行数:36，
示例14: u8g_dev_tls8204_fnuint8_t u8g_dev_tls8204_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_tls8204_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_SetAddress(u8g, dev, 0); /* command mode */ u8g_SetChipSelect(u8g, dev, 1); u8g_WriteByte(u8g, dev, 0x020 ); /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */ u8g_WriteByte(u8g, dev, 0x080 ); /* set X address */ u8g_WriteByte(u8g, dev, 0x040 | pb->p.page); /* set Y address */ u8g_SetAddress(u8g, dev, 1); /* data mode */ if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) return 0; u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: /* the contrast adjustment does not work, needs to be analysed */ u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_SetChipSelect(u8g, dev, 1); u8g_WriteByte(u8g, dev, 0x021); /* command mode, extended function set */ u8g_WriteByte(u8g, dev, 0x080 | ( (*(uint8_t *)arg) >> 1 ) ); u8g_WriteByte(u8g, dev, 0x020); /* command mode, extended function set */ u8g_SetChipSelect(u8g, dev, 0); return 1; } return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);}
开发者ID:445106011，项目名称:Ultimaker2Marlin，代码行数:36，
示例15: u8g_dev_ssd1306_128x32_2x_fnuint8_t u8g_dev_ssd1306_128x32_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start); u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2)); /* select current page (SSD1306) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t*)pb->buf); u8g_SetChipSelect(u8g, dev, 0); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start); u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1)); /* select current page (SSD1306) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); return 1; } return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);}
开发者ID:dima3dprinters，项目名称:DIMA-LT，代码行数:36，
示例16: u8g_dev_ssd1325_nhd27oled_bw_fnstatic uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { //case U8G_DEV_MSG_IS_BBX_INTERSECTION: // return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg); case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { uint8_t i; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); uint8_t *p = pb->buf; u8g_uint_t cnt; cnt = pb->width; cnt >>= 3; for( i = 0; i < pb->p.page_height; i++ ) { u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */ u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p); u8g_SetChipSelect(u8g, dev, 0); p+=cnt; } } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); u8g_SetChipSelect(u8g, dev, 0); break; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); return 1; } return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);}
开发者ID:azad26195，项目名称:marlin-based-ace-firmware，代码行数:46，
示例17: _OLD_u8g_dev_ssd1325_1bit_write_16_pixelstatic void _OLD_u8g_dev_ssd1325_1bit_write_16_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right){ uint8_t d, cnt; cnt = 8; do { d = 0; if ( left & 1 ) d |= 0x0f0; if ( right & 1 ) d |= 0x00f; u8g_WriteByte(u8g, dev, d); left >>= 1; right >>= 1; cnt--; }while ( cnt > 0 );}
开发者ID:azad26195，项目名称:marlin-based-ace-firmware，代码行数:17，
示例18: u8g_dev_ssd1325_nhd27oled_2x_gr_fnstatic uint8_t u8g_dev_ssd1325_nhd27oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS); u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { uint8_t i; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); uint8_t *p = pb->buf; u8g_uint_t cnt; cnt = pb->width; cnt >>= 2; for( i = 0; i < pb->p.page_height; i++ ) { u8g_dev_ssd1325_gr_prepare_row(u8g, dev, i); /* this will also enable chip select */ u8g_WriteSequence4LTo16GrDevice(u8g, dev, cnt, p); u8g_SetChipSelect(u8g, dev, 0); p+=cnt; } } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x081); u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1); u8g_SetChipSelect(u8g, dev, 0); return 1; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off); return 1; } return u8g_dev_pb16h2_base_fn(u8g, dev, msg, arg);}
开发者ID:whdlgp，项目名称:Cupdrone_for_cpp，代码行数:44，
示例19: u8g_dev_st75256_jlx240160g676_4x_fn/******************************************************************************* * jlx240160g-676 4x peed driver. More ram. ******************************************************************************/uint8_t u8g_dev_st75256_jlx240160g676_4x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) { uint16_t i; switch (msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, NULL); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_init_seq); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_data_start1); u8g_WriteByte(u8g, dev, 1); // Set start page u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_data_start2); for (i = 0; i < (WIDTH * HEIGHT/PAGE_HEIGHT); i++) { u8g_WriteByte(u8g, dev, 0x00); //Заполняем дисплей белым } break; case U8G_DEV_MSG_PAGE_NEXT: { uint8_t y, i; uint8_t *ptr; u8g_pb_t *pb = (u8g_pb_t *) (dev->dev_mem); u8g_SetChipSelect(u8g, dev, 1); y = pb->p.page_y0; ptr = pb->buf; u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_data_start1); u8g_WriteByte(u8g, dev, 1 + y); // Set start page u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_data_start2); for (i = 0; i < 4; i++) { u8g_WriteSequence(u8g, dev, WIDTH, ptr); ptr += WIDTH; y++; } u8g_SetChipSelect(u8g, dev, 0); } break; case U8G_DEV_MSG_CONTRAST: u8g_SetChipSelect(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); /* instruction mode */ u8g_WriteByte(u8g, dev, 0x81); u8g_SetAddress(u8g, dev, 1); /* data mode */ u8g_WriteByte(u8g, dev, (*(uint8_t *) arg % 64)); u8g_WriteByte(u8g, dev, 3 + (*(uint8_t *) arg / 64)); u8g_SetChipSelect(u8g, dev, 0); return 1; case U8G_DEV_MSG_SLEEP_ON: u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_sleep_on); return 1; case U8G_DEV_MSG_SLEEP_OFF: u8g_WriteEscSeqP(u8g, dev, u8g_dev_st75256_sleep_off); return 1; } return u8g_dev_pb32v1_base_fn(u8g, dev, msg, arg);}
开发者ID:7134956，项目名称:u8glib，代码行数:52，
示例20: LcdWriteCommandstatic void LcdWriteCommand(u8g_t* u8g, u8g_dev_t* dev, uint8_t* cmd){ u8g_SetChipSelect(u8g, dev, 1); //there seems to be a bug with write sequence in my device driver. u8g_WriteByte(u8g,dev, cmd[0]); u8g_WriteByte(u8g,dev, cmd[1]); u8g_WriteByte(u8g,dev, cmd[2]);// u8g_WriteSequence(u8g, dev, 3, cmd); u8g_SetChipSelect(u8g, dev, 0); //u8g_Delay(10); u8g_SetChipSelect(u8g,dev,1); u8g_WriteByte(u8g,dev, cmd[3]); u8g_WriteByte(u8g,dev, cmd[4]); u8g_WriteByte(u8g,dev, cmd[5]);// u8g_WriteSequence(u8g,dev,3, &cmd[3]); u8g_SetChipSelect(u8g,dev,0); //u8g_Delay(10);}
开发者ID:hossboss，项目名称:SPI_Display_Test，代码行数:18，
示例21: u8g_dev_st7565_lm6059_fnuint8_t u8g_dev_st7565_lm6059_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_init_seq); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start); u8g_WriteByte(u8g, dev, 0x0b0 | pb->p.page); /* select current page (ST7565R) */ u8g_SetAddress(u8g, dev, 1); /* data mode */ if ( u8g_pb_WriteBuffer(pb, u8g, dev) == 0 ) return 0; u8g_SetChipSelect(u8g, dev, 0); } break; } return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);}
开发者ID:janblumenkamp，项目名称:rcj2015，代码行数:24，
示例22: u8g_dev_a2_micro_printer_fnuint8_t u8g_dev_a2_micro_printer_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg){ switch(msg) { case U8G_DEV_MSG_INIT: u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE); break; case U8G_DEV_MSG_STOP: break; case U8G_DEV_MSG_PAGE_NEXT: { uint8_t y, i, j; uint8_t *ptr; u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); y = pb->p.page_y0; ptr = (uint8_t*)pb->buf; u8g_WriteByte(u8g, dev, 27); /* ESC */ u8g_WriteByte(u8g, dev, 55 ); /* parameter command */ u8g_WriteByte(u8g, dev, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/ u8g_WriteByte(u8g, dev, 160); /* 3-255 Heating time,Unit(10us),Default:80(800us) */ u8g_WriteByte(u8g, dev, 20); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/ u8g_WriteByte(u8g, dev, 18); /* DC2 */ u8g_WriteByte(u8g, dev, 42 ); /* * */ u8g_WriteByte(u8g, dev, pb->p.page_height ); u8g_WriteByte(u8g, dev, pb->width/8 ); for( i = 0; i < pb->p.page_height; i ++ ) { for( j = 0; j < pb->width/8; j++ ) { u8g_WriteByte(u8g, dev, *ptr); ptr++; } u8g_Delay(LINE_DELAY); y++; } /* set parameters back to their default values */ u8g_WriteByte(u8g, dev, 27); /* ESC */ u8g_WriteByte(u8g, dev, 55 ); /* parameter command */ u8g_WriteByte(u8g, dev, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/ u8g_WriteByte(u8g, dev, 80); /* 3-255 Heating time,Unit(10us),Default:80(800us) */ u8g_WriteByte(u8g, dev, 2); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/ } break; } return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);}
开发者ID:dima3dprinters，项目名称:DIMA-LT，代码行数:52，
示例23: U8G_ESC_DLY/* sequence := { direct_value | escape_sequence } direct_value := 0..254 escape_sequence := value_255 | sequence_end | delay | adr | cs | not_used value_255 := 255 255 sequence_end = 255 254 delay := 255 0..127 adr := 255 0x0e0 .. 0x0ef cs := 255 0x0d0 .. 0x0df not_used := 255 101..254#define U8G_ESC_DLY(x) 255, ((x) & 0x7f)#define U8G_ESC_CS(x) 255, (0xd0 | ((x)&0x0f))#define U8G_ESC_ADR(x) 255, (0xe0 | ((x)&0x0f))#define U8G_ESC_VCC(x) 255, (0xbe | ((x)&0x01))#define U8G_ESC_END 255, 254#define U8G_ESC_255 255, 255#define U8G_ESC_RST(x) 255, (0xc0 | ((x)&0x0f))*/uint8_t u8g_WriteEscSeqP(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_seq){ uint8_t is_escape = 0; uint8_t value; for(;;) { value = u8g_pgm_read(esc_seq); if ( is_escape == 0 ) { if ( value != 255 ) { if ( u8g_WriteByte(u8g, dev, value) == 0 ) return 0; } else { is_escape = 1; } } else { if ( value == 255 ) { if ( u8g_WriteByte(u8g, dev, value) == 0 ) return 0; } else if ( value == 254 ) { break; } else if ( value >= 0x0f0 ) { /* not yet used, do nothing */ } else if ( value >= 0xe0 ) { u8g_SetAddress(u8g, dev, value & 0x0f); } else if ( value >= 0xd0 ) { u8g_SetChipSelect(u8g, dev, value & 0x0f); } else if ( value >= 0xc0 ) { u8g_SetResetLow(u8g, dev); value &= 0x0f; value <<= 4; value+=2; u8g_Delay(value); u8g_SetResetHigh(u8g, dev); u8g_Delay(value); } else if ( value >= 0xbe ) { /* not yet implemented */ /* u8g_SetVCC(u8g, dev, value & 0x01); */ } else if ( value <= 127 ) { u8g_Delay(value); } is_escape = 0; } esc_seq++; } return 1;}
开发者ID:02047788a，项目名称:Marlin，代码行数:87，
注：本文中的u8g_WriteByte函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ u8g_WriteEscSeqP函数代码示例
C++ u8g_SetChipSelect函数代码示例 |
