这篇教程C++ CAM_INFO函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中CAM_INFO函数的典型用法代码示例。如果您正苦于以下问题：C++ CAM_INFO函数的具体用法？C++ CAM_INFO怎么用？C++ CAM_INFO使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了CAM_INFO函数的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: icp_hd_resetstatic int icp_hd_reset(int set){ int rc = 0; rc = gpio_tlmm_config(GPIO_CFG(SENSOR_RESET_8M, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),GPIO_CFG_ENABLE); if (!rc) { CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); gpio_set_value(SENSOR_RESET_8M,0); if(set){ gpio_set_value(SENSOR_RESET_8M,1); } } else{ CAM_ERR("icp_hd_reset gpio_tlmm_config Failed!/n"); goto reset_fail; } CAM_INFO("%s %s Success:%d/n", __FILE__, __func__, __LINE__); return rc;reset_fail: CAM_ERR("%s %s Failed!:%d/n", __FILE__, __func__, __LINE__); return rc;}
开发者ID:victor2002，项目名称:a770k_kernel，代码行数:25，
示例2: s5k6aafx13_resetstatic int s5k6aafx13_reset(int set)//const struct msm_camera_sensor_info *dev){ int rc = 0; //rc = gpio_request(dev->sensor_reset, "s5k6aafx13"); rc = gpio_tlmm_config(GPIO_CFG(SENSOR_RESET, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),GPIO_CFG_ENABLE); if (!rc) { CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); gpio_set_value(SENSOR_RESET,0); //rc = gpio_direction_output(137, 0); mdelay(20); if(set) { gpio_set_value(SENSOR_RESET,1); } //rc = gpio_direction_output(137, 1); } //standby rc = gpio_tlmm_config(GPIO_CFG(SENSOR_STANDBY, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),GPIO_CFG_ENABLE); if (!rc) { CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); gpio_set_value(SENSOR_STANDBY,set); //rc = gpio_direction_output(137, 0); mdelay(20); } //gpio_free(dev->sensor_reset); return rc;}
开发者ID:victor2002，项目名称:a770k_kernel，代码行数:31，
示例3: s5k6aafx13_vreg_initstatic int s5k6aafx13_vreg_init(){ int rc; CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__);#if 0 lvs3b_1p8v = regulator_get(NULL, "8901_mvs0");//"8901_lvs3"); if (IS_ERR(lvs3b_1p8v)) { CAM_ERR("regulator_get lvs2b_1p8v fail/n" );; return -ENODEV; } lvs2b_1p8v = regulator_get(NULL, "8901_lvs2"); if (IS_ERR(lvs2b_1p8v)) { CAM_ERR("regulator_get lvs2b_1p8v fail/n" );; return -ENODEV; }#endif l1b_2p8v = regulator_get(NULL, "8901_l1"); if (IS_ERR(l1b_2p8v)) { CAM_ERR("regulator_get l1b_2p8v fail/n" );; return -ENODEV; } rc = regulator_set_voltage(l1b_2p8v, 2800000, 2800000); if (rc) { CAM_ERR("%s: unable to set l1b_2p8v voltage to 2.8V/n", __func__); goto fail; } l15a_1p5v = regulator_get(NULL, "8058_l15"); if (IS_ERR(l15a_1p5v)) { CAM_ERR("regulator_get l15a_1p5v fail/n" );; return -ENODEV; } rc = regulator_set_voltage(l15a_1p5v, 1500000, 1500000); if (rc) { CAM_ERR("%s: unable to set l15a_1p5v voltage to 1.5V/n", __func__); goto fail; } lvs1b_1p8v = regulator_get(NULL, "8901_lvs1"); if (IS_ERR(lvs1b_1p8v)) { CAM_ERR("regulator_get lvs1b_1p8v fail/n" );; return -ENODEV; } CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); return rc;fail: CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); if(l15a_1p5v) { regulator_put(l15a_1p5v); } if(l1b_2p8v) { regulator_put(l1b_2p8v); } return rc; }
开发者ID:victor2002，项目名称:a770k_kernel，代码行数:57，
示例4: mt9v113_powerstatic int mt9v113_power(int on){ int rc = 0; int status = 0; //CAM_INFO("%s %s:%d power = %d/n", __FILE__, __func__, __LINE__,on); if(on) { rc = regulator_enable(lvs3b_1p8v); if (rc) { CAM_ERR("%s: Enable regulator lvs3b_1p8v failed/n", __func__); goto fail; } msleep(1); rc = regulator_enable(lvs1b_1p8v); if (rc) { CAM_ERR("%s: Enable regulator lvs1b_1p8v failed/n", __func__); goto fail; } msleep(1); rc = regulator_enable(l15a_2p8v); if (rc) { CAM_ERR("%s: Enable regulator l15a_2p8v failed/n", __func__); goto fail; } msleep(1); } else { rc = regulator_disable(l15a_2p8v); if (rc) CAM_INFO("%s: Disable regulator l15a_2p8v failed/n", __func__); regulator_put(l15a_2p8v); rc = regulator_disable(lvs3b_1p8v); if (rc) CAM_ERR("%s: Disable regulator lvs3b_1p8v failed/n", __func__); rc = regulator_disable(lvs1b_1p8v); if (rc) CAM_ERR("%s: Disable regulator lvs1b_1p8v failed/n", __func__); } //CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); status = gpio_tlmm_config(GPIO_CFG(SENSOR_RESET, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),GPIO_CFG_ENABLE); if (!status) { //CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); gpio_set_value(SENSOR_RESET,0); } return rc;fail: CAM_INFO("%s %s:%d/n", __FILE__, __func__, __LINE__); if(l15a_2p8v) regulator_put(l15a_2p8v); return rc; }
开发者ID:emreharbutoglu，项目名称:at1-S0834211，代码行数:55，
注：本文中的CAM_INFO函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ CAN_DeInit函数代码示例
C++ CAM_CALDB函数代码示例 |
