这篇教程C++ DEVICE_GET函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中DEVICE_GET函数的典型用法代码示例。如果您正苦于以下问题：C++ DEVICE_GET函数的具体用法？C++ DEVICE_GET怎么用？C++ DEVICE_GET使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了DEVICE_GET函数的30个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: i2c_stm32_irq_config_func_4static void i2c_stm32_irq_config_func_4(struct device *dev){ IRQ_CONNECT(DT_I2C_4_EVENT_IRQ, DT_I2C_4_EVENT_IRQ_PRI, stm32_i2c_event_isr, DEVICE_GET(i2c_stm32_4), 0); irq_enable(DT_I2C_4_EVENT_IRQ); IRQ_CONNECT(DT_I2C_4_ERROR_IRQ, DT_I2C_4_ERROR_IRQ_PRI, stm32_i2c_error_isr, DEVICE_GET(i2c_stm32_4), 0); irq_enable(DT_I2C_4_ERROR_IRQ);}
开发者ID:milinddeore，项目名称:zephyr，代码行数:10，
示例2: dma_qmsi_configstatic void dma_qmsi_config(struct device *dev){ ARG_UNUSED(dev); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_0), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_0, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_0)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_0_mask); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_1), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_1, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_1)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_1_mask);#if (CONFIG_SOC_QUARK_SE_C1000) IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_2), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_2, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_2)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_2_mask); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_3), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_3, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_3)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_3_mask); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_4), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_4, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_4)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_4_mask); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_5), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_5, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_5)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_5_mask); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_6), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_6, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_6)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_6_mask); IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_7), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_isr_7, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_INT_7)); QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->dma_0_int_7_mask);#endif /* CONFIG_SOC_QUARK_SE_C1000 */ IRQ_CONNECT(IRQ_GET_NUMBER(QM_IRQ_DMA_0_ERROR_INT), CONFIG_DMA_0_IRQ_PRI, qm_dma_0_error_isr, DEVICE_GET(dma_qmsi), 0); irq_enable(IRQ_GET_NUMBER(QM_IRQ_DMA_0_ERROR_INT));#if (QM_LAKEMONT) QM_INTERRUPT_ROUTER->dma_0_error_int_mask &= ~QM_IR_DMA_ERROR_HOST_MASK;#elif (QM_SENSOR) QM_INTERRUPT_ROUTER->dma_0_error_int_mask &= ~QM_IR_DMA_ERROR_SS_MASK;#endif}
开发者ID:milinddeore，项目名称:zephyr，代码行数:59，
示例3: usart_gecko_config_func_3static void usart_gecko_config_func_3(struct device *dev){ IRQ_CONNECT(DT_SILABS_GECKO_USART_3_IRQ_RX, DT_SILABS_GECKO_USART_3_IRQ_RX_PRIORITY, uart_gecko_isr, DEVICE_GET(usart_3), 0); IRQ_CONNECT(DT_SILABS_GECKO_USART_3_IRQ_TX, DT_SILABS_GECKO_USART_3_IRQ_TX_PRIORITY, uart_gecko_isr, DEVICE_GET(usart_3), 0); irq_enable(DT_SILABS_GECKO_USART_3_IRQ_RX); irq_enable(DT_SILABS_GECKO_USART_3_IRQ_TX);}
开发者ID:milinddeore，项目名称:zephyr，代码行数:12，
示例4: uart_mcux_config_func_5static void uart_mcux_config_func_5(struct device *dev){ IRQ_CONNECT(CONFIG_UART_MCUX_5_IRQ_STATUS, CONFIG_UART_MCUX_5_IRQ_STATUS_PRI, uart_mcux_isr, DEVICE_GET(uart_5), 0); irq_enable(CONFIG_UART_MCUX_5_IRQ_STATUS); IRQ_CONNECT(CONFIG_UART_MCUX_5_IRQ_ERROR, CONFIG_UART_MCUX_5_IRQ_ERROR_PRI, uart_mcux_isr, DEVICE_GET(uart_5), 0); irq_enable(CONFIG_UART_MCUX_5_IRQ_ERROR);}
开发者ID:rsalveti，项目名称:zephyr，代码行数:14，
示例5: mcux_igpio_4_initstatic int mcux_igpio_4_init(struct device *dev){ IRQ_CONNECT(CONFIG_MCUX_IGPIO_4_IRQ_0, CONFIG_MCUX_IGPIO_4_IRQ_0_PRI, mcux_igpio_port_isr, DEVICE_GET(mcux_igpio_4), 0); irq_enable(CONFIG_MCUX_IGPIO_4_IRQ_0); IRQ_CONNECT(CONFIG_MCUX_IGPIO_4_IRQ_1, CONFIG_MCUX_IGPIO_4_IRQ_1_PRI, mcux_igpio_port_isr, DEVICE_GET(mcux_igpio_4), 0); irq_enable(CONFIG_MCUX_IGPIO_4_IRQ_1); return 0;}
开发者ID:zmole945，项目名称:zephyr，代码行数:14，
示例6: mcux_igpio_5_initstatic int mcux_igpio_5_init(struct device *dev){ IRQ_CONNECT(DT_MCUX_IGPIO_5_IRQ_0, DT_MCUX_IGPIO_5_IRQ_0_PRI, mcux_igpio_port_isr, DEVICE_GET(mcux_igpio_5), 0); irq_enable(DT_MCUX_IGPIO_5_IRQ_0); IRQ_CONNECT(DT_MCUX_IGPIO_5_IRQ_1, DT_MCUX_IGPIO_5_IRQ_1_PRI, mcux_igpio_port_isr, DEVICE_GET(mcux_igpio_5), 0); irq_enable(DT_MCUX_IGPIO_5_IRQ_1); return 0;}
开发者ID:loicpoulain，项目名称:zephyr，代码行数:14，
示例7: uart_mcux_config_func_5static void uart_mcux_config_func_5(struct device *dev){ IRQ_CONNECT(IRQ_UART5_STATUS, CONFIG_UART_MCUX_5_IRQ_PRI, uart_mcux_isr, DEVICE_GET(uart_5), 0); irq_enable(IRQ_UART5_STATUS);#ifdef IRQ_UART5_ERROR IRQ_CONNECT(IRQ_UART5_ERROR, CONFIG_UART_MCUX_5_IRQ_PRI, uart_mcux_isr, DEVICE_GET(uart_5), 0); irq_enable(IRQ_UART5_ERROR);#endif}
开发者ID:01org，项目名称:zephyr，代码行数:14，
示例8: qdec_nrfx_event_handlerstatic void qdec_nrfx_event_handler(nrfx_qdec_event_t event){ sensor_trigger_handler_t handler; unsigned int key; switch (event.type) { case NRF_QDEC_EVENT_REPORTRDY: accumulate(&qdec_nrfx_data, event.data.report.acc); key = irq_lock(); handler = qdec_nrfx_data.data_ready_handler; irq_unlock(key); if (handler) { struct sensor_trigger trig = { .type = SENSOR_TRIG_DATA_READY, .chan = SENSOR_CHAN_ROTATION, }; handler(DEVICE_GET(qdec_nrfx), &trig); } break; default: LOG_ERR("unhandled event (0x%x)", event.type); break; }}
开发者ID:milinddeore，项目名称:zephyr，代码行数:28，
示例9: uart_cmsdk_apb_irq_config_func_4static void uart_cmsdk_apb_irq_config_func_4(struct device *dev){ IRQ_CONNECT(DT_ARM_CMSDK_UART_4_IRQ_TX, DT_ARM_CMSDK_UART_4_IRQ_TX_PRIORITY, uart_cmsdk_apb_isr, DEVICE_GET(uart_cmsdk_apb_4), 0); irq_enable(DT_ARM_CMSDK_UART_4_IRQ_TX); IRQ_CONNECT(DT_ARM_CMSDK_UART_4_IRQ_RX, DT_ARM_CMSDK_UART_4_IRQ_RX_PRIORITY, uart_cmsdk_apb_isr, DEVICE_GET(uart_cmsdk_apb_4), 0); irq_enable(DT_ARM_CMSDK_UART_4_IRQ_RX);}
开发者ID:loicpoulain，项目名称:zephyr，代码行数:16，
示例10: i2c_stm32_irq_config_func_2static void i2c_stm32_irq_config_func_2(struct device *dev){#ifdef CONFIG_I2C_STM32_COMBINED_INTERRUPT IRQ_CONNECT(DT_I2C_2_COMBINED_IRQ, DT_I2C_2_COMBINED_IRQ_PRI, stm32_i2c_combined_isr, DEVICE_GET(i2c_stm32_2), 0); irq_enable(DT_I2C_2_COMBINED_IRQ);#else IRQ_CONNECT(DT_I2C_2_EVENT_IRQ, DT_I2C_2_EVENT_IRQ_PRI, stm32_i2c_event_isr, DEVICE_GET(i2c_stm32_2), 0); irq_enable(DT_I2C_2_EVENT_IRQ); IRQ_CONNECT(DT_I2C_2_ERROR_IRQ, DT_I2C_2_ERROR_IRQ_PRI, stm32_i2c_error_isr, DEVICE_GET(i2c_stm32_2), 0); irq_enable(DT_I2C_2_ERROR_IRQ);#endif}
开发者ID:milinddeore，项目名称:zephyr，代码行数:16，
示例11: mcux_wdog_config_func_0static void mcux_wdog_config_func_0(struct device *dev){ IRQ_CONNECT(CONFIG_WDT_0_IRQ, CONFIG_WDT_0_IRQ_PRI, mcux_wdog_isr, DEVICE_GET(mcux_wdog_0), 0); irq_enable(CONFIG_WDT_0_IRQ);}
开发者ID:nordic-krch，项目名称:zephyr，代码行数:7，
示例12: i2c_mcux_config_func_1static void i2c_mcux_config_func_1(struct device *dev){ IRQ_CONNECT(CONFIG_I2C_MCUX_1_IRQ, CONFIG_I2C_MCUX_1_IRQ_PRI, i2c_mcux_isr, DEVICE_GET(i2c_mcux_1), 0); irq_enable(CONFIG_I2C_MCUX_1_IRQ);}
开发者ID:kraj，项目名称:zephyr，代码行数:7，
示例13: imx_gpio_7_initstatic int imx_gpio_7_init(struct device *dev){ IRQ_CONNECT(DT_GPIO_IMX_PORT_7_IRQ_0, DT_GPIO_IMX_PORT_7_IRQ_0_PRI, imx_gpio_port_isr, DEVICE_GET(imx_gpio_7), 0); irq_enable(DT_GPIO_IMX_PORT_7_IRQ_0); IRQ_CONNECT(DT_GPIO_IMX_PORT_7_IRQ_1, DT_GPIO_IMX_PORT_7_IRQ_1_PRI, imx_gpio_port_isr, DEVICE_GET(imx_gpio_7), 0); irq_enable(DT_GPIO_IMX_PORT_7_IRQ_1); return 0;}
开发者ID:milinddeore，项目名称:zephyr，代码行数:16，
示例14: mcux_adc16_config_func_1static void mcux_adc16_config_func_1(struct device *dev){ IRQ_CONNECT(CONFIG_ADC_1_IRQ, CONFIG_ADC_1_IRQ_PRI, mcux_adc16_isr, DEVICE_GET(mcux_adc16_1), 0); irq_enable(CONFIG_ADC_1_IRQ);}
开发者ID:agatti，项目名称:zephyr，代码行数:7，
示例15: timer_cmsdk_apb_config_1static void timer_cmsdk_apb_config_1(struct device *dev){ IRQ_CONNECT(CMSDK_APB_TIMER_1_IRQ, CONFIG_TIMER_TMR_CMSDK_APB_1_IRQ_PRI, timer_tmr_cmsdk_apb_isr, DEVICE_GET(timer_tmr_cmsdk_apb_0), 0); irq_enable(CMSDK_APB_TIMER_1_IRQ);}
开发者ID:01org，项目名称:zephyr，代码行数:7，
示例16: uart_cmsdk_apb_irq_config_func_4static void uart_cmsdk_apb_irq_config_func_4(struct device *dev){ IRQ_CONNECT(CMSDK_APB_UART_4_IRQ_TX, CONFIG_UART_CMSDK_APB_PORT4_IRQ_PRI, uart_cmsdk_apb_isr, DEVICE_GET(uart_cmsdk_apb_4), 0); irq_enable(CMSDK_APB_UART_4_IRQ_TX); IRQ_CONNECT(CMSDK_APB_UART_4_IRQ_RX, CONFIG_UART_CMSDK_APB_PORT4_IRQ_PRI, uart_cmsdk_apb_isr, DEVICE_GET(uart_cmsdk_apb_4), 0); irq_enable(CMSDK_APB_UART_4_IRQ_RX);}
开发者ID:bboozzoo，项目名称:zephyr，代码行数:16，
示例17: usart2_sam_irq_config_funcstatic void usart2_sam_irq_config_func(struct device *port){ IRQ_CONNECT(CONFIG_USART_SAM_PORT_2_IRQ, CONFIG_USART_SAM_PORT_2_IRQ_PRIO, usart_sam_isr, DEVICE_GET(usart2_sam), 0); irq_enable(CONFIG_USART_SAM_PORT_2_IRQ);}
开发者ID:nordic-krch，项目名称:zephyr，代码行数:8，
示例18: event_handlerstatic void event_handler(const nrfx_adc_evt_t *p_event){ struct device *dev = DEVICE_GET(adc_0); if (p_event->type == NRFX_ADC_EVT_DONE) { adc_context_on_sampling_done(&m_data.ctx, dev); }}
开发者ID:nordic-krch，项目名称:zephyr，代码行数:8，
示例19: qrk_cxxxx_rtc_initint qrk_cxxxx_rtc_init(struct device *rtc_dev){ IRQ_CONNECT(SOC_RTC_INTERRUPT, ISR_DEFAULT_PRIO, rtc_isr, DEVICE_GET(rtc), 0); irq_enable(SOC_RTC_INTERRUPT); rtc_dev->driver_api = &qrk_cxxxx_rtc_funcs; return 0;}
开发者ID:RCintel，项目名称:main，代码行数:8，
示例20: uart_nrf5_irq_configstatic void uart_nrf5_irq_config(struct device *port){ IRQ_CONNECT(NRF52_IRQ_UARTE0_UART0_IRQn, CONFIG_UART_NRF5_IRQ_PRI, uart_nrf5_isr, DEVICE_GET(uart_nrf5_0), 0); irq_enable(NRF52_IRQ_UARTE0_UART0_IRQn);}
开发者ID:hudkmr，项目名称:zephyr，代码行数:8，
示例21: stm32_exti_unset_callbackvoid stm32_exti_unset_callback(int line){ struct device *dev = DEVICE_GET(exti_stm32); struct stm32_exti_data *data = dev->driver_data; data->cb[line].cb = NULL; data->cb[line].data = NULL;}
开发者ID:sunkaizhu，项目名称:zephyr，代码行数:8，
示例22: dtimer_cmsdk_apb_config_0static void dtimer_cmsdk_apb_config_0(struct device *dev){ IRQ_CONNECT(DT_ARM_CMSDK_DTIMER_0_IRQ_0, DT_ARM_CMSDK_DTIMER_0_IRQ_0_PRIORITY, dtmr_cmsdk_apb_isr, DEVICE_GET(dtmr_cmsdk_apb_0), 0); irq_enable(DT_ARM_CMSDK_DTIMER_0_IRQ_0);}
开发者ID:loicpoulain，项目名称:zephyr，代码行数:8，
示例23: rtc_callbackstatic void rtc_callback(void *user_data){ const struct counter_alarm_cfg *cfg = user_data; if (user_cb) { (*user_cb)(DEVICE_GET(rtc), 0, cfg->ticks, user_data); }}
开发者ID:workaroundgmbh，项目名称:zephyr_public，代码行数:8，
示例24: mcux_elcdif_config_func_1static void mcux_elcdif_config_func_1(struct device *dev){ IRQ_CONNECT(DT_FSL_IMX6SX_LCDIF_0_IRQ_0, DT_FSL_IMX6SX_LCDIF_0_IRQ_0_PRIORITY, mcux_elcdif_isr, DEVICE_GET(mcux_elcdif_1), 0); irq_enable(DT_FSL_IMX6SX_LCDIF_0_IRQ_0);}
开发者ID:loicpoulain，项目名称:zephyr，代码行数:8，
示例25: mcux_lpuart_config_func_1static void mcux_lpuart_config_func_1(struct device *dev){ IRQ_CONNECT(CONFIG_UART_MCUX_LPUART_1_IRQ, CONFIG_UART_MCUX_LPUART_1_IRQ_PRI, mcux_lpuart_isr, DEVICE_GET(uart_1), 0); irq_enable(CONFIG_UART_MCUX_LPUART_1_IRQ);}
开发者ID:kraj，项目名称:zephyr，代码行数:8，
示例26: uart4_sam_irq_config_funcstatic void uart4_sam_irq_config_func(struct device *port){ IRQ_CONNECT(DT_UART_SAM_PORT_4_IRQ, DT_UART_SAM_PORT_4_IRQ_PRIO, uart_sam_isr, DEVICE_GET(uart4_sam), 0); irq_enable(DT_UART_SAM_PORT_4_IRQ);}
开发者ID:loicpoulain，项目名称:zephyr，代码行数:8，
示例27: i2c_imx_config_func_4static void i2c_imx_config_func_4(struct device *dev){ ARG_UNUSED(dev); IRQ_CONNECT(DT_FSL_IMX7D_I2C_I2C_4_IRQ, DT_FSL_IMX7D_I2C_I2C_4_IRQ_PRIORITY, i2c_imx_isr, DEVICE_GET(i2c_imx_4), 0); irq_enable(DT_FSL_IMX7D_I2C_I2C_4_IRQ);}
开发者ID:milinddeore，项目名称:zephyr，代码行数:8，
示例28: mcux_lpsci_config_func_0static void mcux_lpsci_config_func_0(struct device *dev){ IRQ_CONNECT(NXP_KINETIS_LPSCI_4006A000_IRQ_0, NXP_KINETIS_LPSCI_4006A000_IRQ_0_PRIORITY, mcux_lpsci_isr, DEVICE_GET(uart_0), 0); irq_enable(NXP_KINETIS_LPSCI_4006A000_IRQ_0);}
开发者ID:01org，项目名称:zephyr，代码行数:8，
示例29: uart_cmsdk_apb_irq_config_func_3static void uart_cmsdk_apb_irq_config_func_3(struct device *dev){ IRQ_CONNECT(CMSDK_APB_UART_3_IRQ, CONFIG_UART_CMSDK_APB_PORT3_IRQ_PRI, uart_cmsdk_apb_isr, DEVICE_GET(uart_cmsdk_apb_3), 0); irq_enable(CMSDK_APB_UART_3_IRQ);}
开发者ID:bboozzoo，项目名称:zephyr，代码行数:9，
示例30: i2c_mcux_config_func_0static void i2c_mcux_config_func_0(struct device *dev){ ARG_UNUSED(dev); IRQ_CONNECT(CONFIG_I2C_MCUX_0_IRQ, CONFIG_I2C_MCUX_0_IRQ_PRI, i2c_mcux_isr, DEVICE_GET(i2c_mcux_0), 0); irq_enable(CONFIG_I2C_MCUX_0_IRQ);}
开发者ID:kraj，项目名称:zephyr，代码行数:9，
注：本文中的DEVICE_GET函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ DEVICE_LOG函数代码示例
C++ DEVICE_DEBUG函数代码示例 |
