| 受限于 Redis 单点性能，加上我们对数据天生就有的备份的需求，因此 Redis 提供了主从复制的服务。 本文记录了通过 docker compose 搭建一主双从的 Redis 服务。
配置解析
################################# REPLICATION ################################## 【Slave】连接 Master 的配置# slaveof 172.25.0.101 6379# 【Slave】只读模式# slave-read-only yes# 【Slave】密码# masterauth <master-password># 【Slave】复制期间是否允许响应查询，可能会返回脏数据# slave-serve-stale-data yes# 【Slave】Slave 晋级为 Master 的优先级，仅哨兵模式下生效# slave-priority 100# 【Slave】Slave 向 Master 报告的自己的 IP# slave-announce-ip 5.5.5.5# 【Slave】Slave 向 Master 报告的自己的端口# slave-announce-port 1234# 【Slave】Slave ping Master 的时间间隔# repl-ping-slave-period 10# 【Master/Slave】超时时间# repl-timeout 60# 【Master】Diskless 就是直接将要复制的 RDB 文件写入到 Socket 中，而不会先存储到磁盘上repl-diskless-sync no# 【Master】若开启 Diskless，会等待指定秒之后再进行复制，以便让更多客户端可以在窗口期内连接，并行传送# repl-diskless-sync-delay 5# 【Master】是否开启 Nagle 算法，可以减少流量占用，但会同步得慢些repl-disable-tcp-nodelay no# 【Master】环形缓冲日志的大小，给 Slave 断开之后重连使用，避免全量复制，默认 1mb# repl-backlog-size 1mb# 【Master】当 Master 断连所有 Slave 指定时间后，Master 会清空 backlog# repl-backlog-ttl 3600# 【Master】当低于指定个 Slave 连接时，Master 拒绝所有写操作# min-slaves-to-write 3# 【Master】当延迟高于指定秒数时，Master 拒绝所有写操作# min-slaves-max-lag 10
服务搭建
目录结构
replication/├── docker-compose.yml├── master│ ├── data│ └── redis.conf├── slave1│ ├── data│ └── redis.conf└── slave2 ├── data └── redis.conf
Compose File
定义了一个子网，方便操作，对外暴露 6371（Master）、6372、6373 端口。 version: "3"networks: redis-replication: driver: bridge ipam: config: - subnet: 172.25.0.0/24services: master: image: redis container_name: redis-master ports: - "6371:6379" volumes: - "./master/redis.conf:/etc/redis.conf" - "./master/data:/data" command: ["redis-server", "/etc/redis.conf"] restart: always networks: redis-replication: ipv4_address: 172.25.0.101 slave1: image: redis container_name: redis-slave-1 ports: - "6372:6379" volumes: - "./slave1/redis.conf:/etc/redis.conf" - "./slave1/data:/data" command: ["redis-server", "/etc/redis.conf"] restart: always networks: redis-replication: ipv4_address: 172.25.0.102 slave2: image: redis container_name: redis-slave-2 ports: - "6373:6379" volumes: - "./slave2/redis.conf:/etc/redis.conf" - "./slave2/data:/data" command: ["redis-server", "/etc/redis.conf"] restart: always networks: redis-replication: ipv4_address: 172.25.0.103
实例配置
Master： 基本不用配置，最简单的是指定一个端口就好了。 port 6379protected-mode norepl-diskless-sync norepl-disable-tcp-nodelay no Slave： 实例的配置保持一致就可以了，因为定义了子网，不存在端口冲突。 port 6379protected-mode noslaveof 172.25.0.101 6379slave-read-only yesslave-serve-stale-data yes
启动服务
ocker-compose up -dCreating network "replication_redis-replication" with driver "bridge"Creating redis-slave-1 ... doneCreating redis-master ... doneCreating redis-slave-2 ... done 查看 Master 日志，可以看到接受了两个 Slave 的复制请求： 1:M 18 Aug 2021 15:50:31.772 * Replica 172.25.0.102:6379 asks for synchronization
1:M 18 Aug 2021 15:50:31.772 * Full resync requested by replica 172.25.0.102:6379
1:M 18 Aug 2021 15:50:31.772 * Replication backlog created, my new replication IDs are '5d27746f14ee9be9694d794f96de6ba14a669dd1' and '0000000000000000000000000000000000000000'
1:M 18 Aug 2021 15:50:31.772 * Starting BGSAVE for SYNC with target: disk
1:M 18 Aug 2021 15:50:31.773 * Background saving started by pid 19
19:C 18 Aug 2021 15:50:31.777 * DB saved on disk
19:C 18 Aug 2021 15:50:31.777 * RDB: 0 MB of memory used by copy-on-write
1:M 18 Aug 2021 15:50:31.822 * Background saving terminated with success
1:M 18 Aug 2021 15:50:31.823 * Synchronization with replica 172.25.0.102:6379 succeeded
1:M 18 Aug 2021 15:50:32.170 * Replica 172.25.0.103:6379 asks for synchronization
1:M 18 Aug 2021 15:50:32.170 * Full resync requested by replica 172.25.0.103:6379
1:M 18 Aug 2021 15:50:32.170 * Starting BGSAVE for SYNC with target: disk
1:M 18 Aug 2021 15:50:32.171 * Background saving started by pid 20
20:C 18 Aug 2021 15:50:32.175 * DB saved on disk
20:C 18 Aug 2021 15:50:32.175 * RDB: 0 MB of memory used by copy-on-write
1:M 18 Aug 2021 15:50:32.225 * Background saving terminated with success
1:M 18 Aug 2021 15:50:32.226 * Synchronization with replica 172.25.0.103:6379 succeeded
查看 Slave 日志，可以看到连接建立的全过程： 1:S 18 Aug 2021 15:50:31.771 * Connecting to MASTER 172.25.0.101:6379
1:S 18 Aug 2021 15:50:31.771 * MASTER <-> REPLICA sync started
1:S 18 Aug 2021 15:50:31.771 * Non blocking connect for SYNC fired the event.
1:S 18 Aug 2021 15:50:31.771 * Master replied to PING, replication can continue...
1:S 18 Aug 2021 15:50:31.772 * Partial resynchronization not possible (no cached master)
1:S 18 Aug 2021 15:50:31.773 * Full resync from master: 5d27746f14ee9be9694d794f96de6ba14a669dd1:0
1:S 18 Aug 2021 15:50:31.823 * MASTER <-> REPLICA sync: receiving 175 bytes from master to disk
1:S 18 Aug 2021 15:50:31.823 * MASTER <-> REPLICA sync: Flushing old data
1:S 18 Aug 2021 15:50:31.823 * MASTER <-> REPLICA sync: Loading DB in memory
1:S 18 Aug 2021 15:50:31.828 * Loading RDB produced by version 6.2.5
1:S 18 Aug 2021 15:50:31.828 * RDB age 0 seconds
1:S 18 Aug 2021 15:50:31.828 * RDB memory usage when created 1.83 Mb
1:S 18 Aug 2021 15:50:31.829 * MASTER <-> REPLICA sync: Finished with success
测试
登录 Master，尝试写入新 Key。 127.0.0.1:6371> set hello worldOK 登录 Slave，查看能否读取到： 127.0.0.1:6372> get hello"world" Slave 尝试写操作： 127.0.0.1:6372> set hello redis(error) READONLY You can't write against a read only replica.
下载地址:
详解Linux服务器最多能开放多少个端口
探究一个LED如何入门Linux内核 |
