解析linux或android添加文件系统的属性接口的方法

#include <linux/of_gpio.h>#include <linux/gpio.h>#include <linux/delay.h>#include <linux/module.h>#include <linux/types.h>#include <linux/kobject.h>

unsigned int Gpio134_OtgID = 134; //定义全局变量static unsigned int otgid_status = 1;…

//add zhaojr gpio134 control OTG ID for host or device mode static ssize_t setotgid_store(struct device *dev, struct device_attribute *attr,const char *buf, size_t count)       { unsigned int ret=0; pr_err("%s: /n", __func__);  //ret = kstrtoint(buf, 10, &otgid_status); ret = kstrtouint(buf, 10, &otgid_status); //sscanf(buf, "%lu", &otgid_status); if (ret < 0){  pr_err("%s::kstrtouint() failed /n", __func__); } //sscanf(buf, "%d", &otgid_status); pr_err("%s: otgid_status=%d /n", __func__,otgid_status);  if(otgid_status > 0){  gpio_set_value(Gpio134_OtgID, 1);  }else{  gpio_set_value(Gpio134_OtgID, 0);  } return count;}static ssize_t setotgid_show(struct device *dev,struct device_attribute *attr, char *buf)  { pr_err("%s: /n", __func__);  return sprintf(buf, "%d/n",otgid_status);}//static DEVICE_ATTR_RW(setotgid);/*struct device_attribute dev_attr_setotgid = {       .attr = {.name ="setotgid",         .mode = 0664},     .show = setotgid_show,         .store = setotgid_store,    };*/ //setotgid的一致性，第一个参数setotgid和setotgid_show、setotgid_store前钻必须保持一致static DEVICE_ATTR(setotgid, 0664, setotgid_show, setotgid_store); //end zhaojr addstatic struct device_attribute *android_usb_attributes[] = { &dev_attr_state, &dev_attr_setotgid, //setotgid跟DEVICE_ATTR定义的name必须保持一致 NULL};

static int mdss_mdp_probe(struct platform_device *pdev){....................................................................................//zhaojr add for gpio134 to usb host or device mode ret_status=gpio_request(Gpio134_OtgID, "Gpio134-OtgID"); if(ret_status<0){  pr_err("usb gadget configfs %s::Gpio134_OtgID gpio_request failed/n",__func__);   } pr_err("android_device_create()::Gpio134_OtgID gpio_request OK/n");  gpio_direction_output(Gpio134_OtgID,1); if(otgid_status > 0){ //有自定义初始化状态就添加上这个判断，没有就不需要添加if else操作  pr_err("%s-Gpio134_OtgID pin set 1/n", __func__);  gpio_set_value(Gpio134_OtgID, 1);   //msleep(5); }else{  pr_err("%s-Gpio134_OtgID pin set 0/n", __func__);  gpio_set_value(Gpio134_OtgID, 0);   //msleep(5); } //end zhaojr add................................................................}

static int mdss_mdp_remove(struct platform_device *pdev){ struct mdss_data_type *mdata = platform_get_drvdata(pdev); if (!mdata)  return -ENODEV;  pr_err("%s/n", __func__); gpio_free(Gpio134_OtgID); //zhaojr add free gpio otgid pin ........................................................}

#include <linux/of_gpio.h>#include <linux/gpio.h>#include <linux/delay.h>#include <linux/module.h>#include <linux/types.h>#include <linux/kobject.h>

// add zhaojr gpio63 for close or speaker pa enablestruct kobject *spk_pa_kobj = NULL;unsigned int gpio63_spk_pa_gpio; //for speaker pa ic enable//extern unsigned int gpio63_spk_pa_gpio;static unsigned int SpkPa_Gpio_Enable = 0;static ssize_t spkpaon_store(struct device *dev, struct device_attribute *attr,const char *buf, size_t count)  { unsigned int ret=0; //ret = kstrtoint(buf, 10, &backlight_enable); ret = kstrtouint(buf, 10, &SpkPa_Gpio_Enable); if (ret < 0){ pr_err("%s::kstrtouint() failed /n", __func__); } pr_err("%s: SpkPa_Gpio_Enable=%d /n", __func__,SpkPa_Gpio_Enable);  if(SpkPa_Gpio_Enable > 0){ //gpio_set_value(gpio63_spk_pa_gpio, 1);  pr_err("%s: gpio_set_value gpio63 speaker pa enable /n", __func__); //功放打开的时序 gpio_set_value(gpio63_spk_pa_gpio,0); udelay(8); gpio_set_value(gpio63_spk_pa_gpio,1); udelay(8); gpio_set_value(gpio63_spk_pa_gpio,0); udelay(8); gpio_set_value(gpio63_spk_pa_gpio,1); //sdm660_cdc->ext_spk_pa_set = true; }else{ pr_err("%s: gpio_set_value gpio63 speaker pa disable /n", __func__); //功放关闭的时序 gpio_set_value(gpio63_spk_pa_gpio,0); udelay(600); //sdm660_cdc->ext_spk_pa_set = false;  } return count;}static ssize_t spkpaon_show(struct device *dev,struct device_attribute *attr, char *buf) {  return sprintf(buf, "%d/n",SpkPa_Gpio_Enable);} static DEVICE_ATTR(spkpaon, 0664, spkpaon_show, spkpaon_store);static struct attribute *spkpa_attributes[] = { &dev_attr_spkpaon.attr, NULL};static const struct attribute_group apkpa_attr_group = { .attrs = spkpa_attributes, NULL};//end zhaojr add

static int msm_anlg_cdc_probe(struct platform_device *pdev){ int ret = 0; struct sdm660_cdc_priv *sdm660_cdc = NULL; struct sdm660_cdc_pdata *pdata; int adsp_state; .................................. dev_set_drvdata(&pdev->dev, sdm660_cdc); //kangting add sdm660_cdc->spk_pa_gpio = of_get_named_gpio(pdev->dev.of_node, "qcom,speaker-pa", 0); if (!gpio_is_valid(sdm660_cdc->spk_pa_gpio)) pr_err("%s, sdm660_cdc->spk_pa_gpio not specified/n",__func__); else{ pr_err("%s, sdm660_cdc->spk_pa_gpio is %d/n",__func__,sdm660_cdc->spk_pa_gpio); ret = gpio_request(sdm660_cdc->spk_pa_gpio, "spk_pa"); if (ret) { pr_err("request spk_pa_gpio failed, ret=%d/n",ret); gpio_free(sdm660_cdc->spk_pa_gpio); } } //kangting end ret = snd_soc_register_codec(&pdev->dev,   &soc_codec_dev_sdm660_cdc,   msm_anlg_cdc_i2s_dai,   ARRAY_SIZE(msm_anlg_cdc_i2s_dai)); if (ret) { dev_err(&pdev->dev, "%s:snd_soc_register_codec failed with error %d/n", __func__, ret); goto err_supplies; } BLOCKING_INIT_NOTIFIER_HEAD(&sdm660_cdc->notifier); BLOCKING_INIT_NOTIFIER_HEAD(&sdm660_cdc->notifier_mbhc); //add by zhaojr gpio63_spk_pa_gpio = sdm660_cdc->spk_pa_gpio; //将设备树种定义的IO口号获取进来 spk_pa_kobj = kobject_create_and_add("spk_pa", NULL); //创建/sys/spk_pa/目录 ret = sysfs_create_group(spk_pa_kobj, &apkpa_attr_group); //创建/sys/class/spk_pa/spkpaon节点 if (ret) dev_err(&pdev->dev,"%s:sysfs_create_group failed with error/n",__func__); //end zhaojr add  ....................................

static int msm_anlg_cdc_remove(struct platform_device *pdev){ struct sdm660_cdc_priv *sdm660_cdc = dev_get_drvdata(&pdev->dev); struct sdm660_cdc_pdata *pdata = sdm660_cdc->dev->platform_data; int count; //add by zhaojr //释放资源 gpio_free(sdm660_cdc->spk_pa_gpio); kobject_put(spk_pa_kobj); //关键函数 sysfs_remove_group(spk_pa_kobj, &apkpa_attr_group); //关键函数 //end zhaojr add for (count = 0; count < sdm660_cdc->child_count && count < ANLG_CDC_CHILD_DEVICES_MAX; count++) platform_device_unregister( sdm660_cdc->pdev_child_devices[count]); snd_soc_unregister_codec(&pdev->dev); msm_anlg_cdc_disable_supplies(sdm660_cdc, pdata); wcd9xxx_spmi_irq_exit(); devm_kfree(&pdev->dev, sdm660_cdc); return 0;}