自学教程：C++ DevicePathType函数代码示例

EFI_STATUS disk_get_part_uuid(EFI_HANDLE *handle, CHAR16 uuid[37]) {        EFI_DEVICE_PATH *device_path;        EFI_STATUS r = EFI_NOT_FOUND;        /* export the device path this image is started from */        device_path = DevicePathFromHandle(handle);        if (device_path) {                EFI_DEVICE_PATH *path, *paths;                paths = UnpackDevicePath(device_path);                for (path = paths; !IsDevicePathEnd(path); path = NextDevicePathNode(path)) {                        HARDDRIVE_DEVICE_PATH *drive;                        if (DevicePathType(path) != MEDIA_DEVICE_PATH)                                continue;                        if (DevicePathSubType(path) != MEDIA_HARDDRIVE_DP)                                continue;                        drive = (HARDDRIVE_DEVICE_PATH *)path;                        if (drive->SignatureType != SIGNATURE_TYPE_GUID)                                continue;                        GuidToString(uuid, (EFI_GUID *)&drive->Signature);                        r = EFI_SUCCESS;                        break;                }                FreePool(paths);        }        return r;}

static VOID_DevPathVendor (    IN OUT POOL_PRINT       *Str,    IN VOID                 *DevPath    ){    VENDOR_DEVICE_PATH                  *Vendor;    CHAR16                              *Type;    UNKNOWN_DEVICE_VENDOR_DEVICE_PATH   *UnknownDevPath;    Vendor = DevPath;    switch (DevicePathType(&Vendor->Header)) {    case HARDWARE_DEVICE_PATH:  Type = L"Hw";        break;    case MESSAGING_DEVICE_PATH: Type = L"Msg";       break;    case MEDIA_DEVICE_PATH:     Type = L"Media";     break;    default:                    Type = L"?";         break;    }                                CatPrint(Str, L"Ven%s(%g", Type, &Vendor->Guid);    if (CompareGuid (&Vendor->Guid, &UnknownDevice) == 0) {        //        // GUID used by EFI to enumerate an EDD 1.1 device        //        UnknownDevPath = (UNKNOWN_DEVICE_VENDOR_DEVICE_PATH *)Vendor;        CatPrint(Str, L":%02x)", UnknownDevPath->LegacyDriveLetter);    } else {        CatPrint(Str, L")");    }}

/* Currently this function is useless */void GetFilePathList(BDS_LOAD_OPTION* BdsLoadOption, char* buffer, int descSize){    if (BdsLoadOption->FilePathListLength <= 0)        return;    EFI_DEVICE_PATH_PROTOCOL* DevicePathNode = BdsLoadOption->FilePathList;    // File path fields    DevicePathNode = BdsLoadOption->FilePathList;    if (DevicePathType(DevicePathNode) != MEDIA_DEVICE_PATH_TYPE)        return;    while (!IsDevicePathEndType(DevicePathNode))    {        switch (DevicePathSubType(DevicePathNode))        {        case HARDDRIVE_SUBTYPE:            printf("HDD");            break;        case FILE_PATH_SUBTYPE:            printf("FILE");            break;        }        DevicePathNode = NextDevicePathNode(DevicePathNode);    }}

EFI_STATUSBdsLoadOptionPxeList (  IN OUT LIST_ENTRY* BdsLoadOptionList  ){  EFI_STATUS                        Status;  UINTN                             HandleCount;  EFI_HANDLE                        *HandleBuffer;  UINTN                             Index;  BDS_SUPPORTED_DEVICE              *SupportedDevice;  EFI_DEVICE_PATH_PROTOCOL*         DevicePathProtocol;  EFI_SIMPLE_NETWORK_PROTOCOL*      SimpleNet;  CHAR16                            DeviceDescription[BOOT_DEVICE_DESCRIPTION_MAX];  EFI_MAC_ADDRESS                   *Mac;  EFI_DEVICE_PATH_PROTOCOL          *DevicePathNode;    // List all the PXE Protocols  Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiPxeBaseCodeProtocolGuid, NULL, &HandleCount, &HandleBuffer);  if (EFI_ERROR (Status)) {    return Status;  }  for (Index = 0; Index < HandleCount; Index++) {    // We only select the handle WITH a Device Path AND the PXE Protocol    Status = gBS->HandleProtocol (HandleBuffer[Index], &gEfiDevicePathProtocolGuid, (VOID **)&DevicePathProtocol);    if (!EFI_ERROR(Status)) {      // Allocate BDS Supported Device structure      SupportedDevice = (BDS_SUPPORTED_DEVICE*)AllocatePool(sizeof(BDS_SUPPORTED_DEVICE));      //Status = gBS->LocateProtocol (&gEfiSimpleNetworkProtocolGuid, NULL, (VOID **)&SimpleNet);       Status = gBS->HandleProtocol (HandleBuffer[Index], &gEfiSimpleNetworkProtocolGuid, (VOID **)&SimpleNet);         if (!EFI_ERROR(Status)) {        Mac = &SimpleNet->Mode->CurrentAddress;        UnicodeSPrint (DeviceDescription,BOOT_DEVICE_DESCRIPTION_MAX,L"MAC Address: %02x:%02x:%02x:%02x:%02x:%02x", Mac->Addr[0],  Mac->Addr[1],  Mac->Addr[2],  Mac->Addr[3],  Mac->Addr[4],  Mac->Addr[5]);      } else {        Status = GenerateDeviceDescriptionName (HandleBuffer[Index], DeviceDescription);        ASSERT_EFI_ERROR (Status);      }      UnicodeSPrint (SupportedDevice->Description,BOOT_DEVICE_DESCRIPTION_MAX,L"PXE on %s",DeviceDescription);      if(NULL != SupportedDevice) {        SupportedDevice->DevicePathProtocol = DevicePathProtocol;        DevicePathNode = DevicePathProtocol;        while (!IsDevicePathEnd (DevicePathNode)) {          if ((DevicePathType (DevicePathNode) == MESSAGING_DEVICE_PATH) &&                ( DevicePathSubType (DevicePathNode) == MSG_MAC_ADDR_DP) ) {            SupportedDevice->Support = &BdsLoadOptionSupportList[BDS_DEVICE_PXE];            InsertTailList (BdsLoadOptionList,&SupportedDevice->Link);            break;          }          DevicePathNode = NextDevicePathNode (DevicePathNode);        }    }    }  }  return EFI_SUCCESS;}

/**  Determines if a device path node is an end node of a device path.  This includes nodes that are the end of a device path instance and nodes that   are the end of an entire device path.  Determines if the device path node specified by Node is an end node of a device path.    This includes nodes that are the end of a device path instance and nodes that are the   end of an entire device path.  If Node represents an end node of a device path,   then TRUE is returned.  Otherwise, FALSE is returned.  If Node is NULL, then ASSERT().  @param  Node      A pointer to a device path node data structure.  @retval TRUE      The device path node specified by Node is an end node of a device path.  @retval FALSE     The device path node specified by Node is not an end node of                     a device path.  **/BOOLEANEFIAPIIsDevicePathEndType (  IN CONST VOID  *Node  ){  ASSERT (Node != NULL);  return (BOOLEAN) (DevicePathType (Node) == END_DEVICE_PATH_TYPE);}

/**  Update the device path that describing a terminal device  based on the new BaudRate, Data Bits, parity and Stop Bits  set.  @param DevicePath terminal device's path**/VOIDChangeVariableDevicePath (  IN OUT EFI_DEVICE_PATH_PROTOCOL  *DevicePath  ){  EFI_DEVICE_PATH_PROTOCOL  *Node;  ACPI_HID_DEVICE_PATH      *Acpi;  UART_DEVICE_PATH          *Uart;  UINTN                     Com;  BM_TERMINAL_CONTEXT       *NewTerminalContext;  BM_MENU_ENTRY             *NewMenuEntry;  Node  = DevicePath;  Node  = NextDevicePathNode (Node);  Com   = 0;  while (!IsDevicePathEnd (Node)) {    Acpi = (ACPI_HID_DEVICE_PATH *) Node;    if (IsIsaSerialNode (Acpi)) {      CopyMem (&Com, &Acpi->UID, sizeof (UINT32));    }    if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {      NewMenuEntry = BOpt_GetMenuEntry (                      &TerminalMenu,                      Com                      );      ASSERT (NewMenuEntry != NULL);      NewTerminalContext  = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;      Uart                = (UART_DEVICE_PATH *) Node;      CopyMem (        &Uart->BaudRate,        &NewTerminalContext->BaudRate,        sizeof (UINT64)        );      CopyMem (        &Uart->DataBits,        &NewTerminalContext->DataBits,        sizeof (UINT8)        );      CopyMem (        &Uart->Parity,        &NewTerminalContext->Parity,        sizeof (UINT8)        );      CopyMem (        &Uart->StopBits,        &NewTerminalContext->StopBits,        sizeof (UINT8)        );    }    Node = NextDevicePathNode (Node);  }}

static NVME_NAMESPACE_DEVICE_PATH *get_nvme_device_path(EFI_DEVICE_PATH *p){	for (; !IsDevicePathEndType(p); p = NextDevicePathNode(p)) {		if (DevicePathType(p) == MESSAGING_DEVICE_PATH		   && DevicePathSubType(p) == MSG_NVME_NAMESPACE_DP)			return (NVME_NAMESPACE_DEVICE_PATH *)p;	}	return NULL;}

PCI_DEVICE_PATH* get_pci_device_path(EFI_DEVICE_PATH *p){	while (!IsDevicePathEndType(p)) {		if (DevicePathType(p) == HARDWARE_DEVICE_PATH		    && DevicePathSubType(p) == HW_PCI_DP)			return (PCI_DEVICE_PATH *)p;		p = NextDevicePathNode(p);	}	return NULL;}

/**  Check whether the device path node is ISA Serial Node.  @param Acpi           Device path node to be checked  @retval TRUE          It's ISA Serial Node.  @retval FALSE         It's NOT ISA Serial Node.**/BOOLEANIsIsaSerialNode (  IN ACPI_HID_DEVICE_PATH *Acpi  ){  return (BOOLEAN) (      (DevicePathType (Acpi) == ACPI_DEVICE_PATH) &&      (DevicePathSubType (Acpi) == ACPI_DP) &&      (ReadUnaligned32 (&Acpi->HID) == EISA_PNP_ID (0x0501))      );}

/**  Check the device path node whether it's the Flow Control node or not.  @param[in] FlowControl    The device path node to be checked.    @retval TRUE              It's the Flow Control node.  @retval FALSE             It's not.**/BOOLEANIsUartFlowControlNode (  IN UART_FLOW_CONTROL_DEVICE_PATH *FlowControl  ){  return (BOOLEAN) (           (DevicePathType (FlowControl) == MESSAGING_DEVICE_PATH) &&           (DevicePathSubType (FlowControl) == MSG_VENDOR_DP) &&           (CompareGuid (&FlowControl->Guid, &gEfiUartDevicePathGuid))           );}

/** *  Get the device path of floppy disk. */EFI_STATUSGetFloppyDevicePath (  OUT EFI_DEVICE_PATH_PROTOCOL        **FloppyDevicePath  ){  EFI_STATUS                      Status;  UINTN                           NoHandle;  EFI_HANDLE                      *Buffer;  UINTN                           Index;  EFI_DEVICE_PATH_PROTOCOL        *DevicePath;  EFI_DEVICE_PATH_PROTOCOL        *RemainPath;  EFI_DEVICE_PATH_PROTOCOL        *LastNode;  ACPI_HID_DEVICE_PATH            *AcpiNode;  Status = gtBS->LocateHandleBuffer (                   ByProtocol,                   &gEfiDevicePathProtocolGuid,                   NULL,                   &NoHandle,                   &Buffer               );  if (EFI_ERROR(Status)) {    return Status;  }  for (Index = 0; Index < NoHandle; Index++) {    Status = gtBS->HandleProtocol (                     Buffer[Index],                     &gEfiDevicePathProtocolGuid,                     &DevicePath                 );    RemainPath = DevicePath;    LastNode = DevicePath;    while (!IsDevicePathEnd (RemainPath)) {      LastNode = RemainPath;      RemainPath = NextDevicePathNode (RemainPath);    }    //    // Is LastNode ACPI device path node ?    //    if ((DevicePathType (LastNode) == 2) &&        (DevicePathSubType (LastNode) == 1)) {      AcpiNode = (ACPI_HID_DEVICE_PATH*)LastNode;      //      // Is floppy device path ?      //      if (EISA_ID_TO_NUM(AcpiNode->HID) == 0x0604) {        *FloppyDevicePath = DevicePath;        return EFI_SUCCESS;      }    }  }  return EFI_NOT_FOUND;}

// Compare device pathsstatic INTN CompareDevicePaths(CONST EFI_DEVICE_PATH *dp1, CONST EFI_DEVICE_PATH *dp2){    if (dp1 == NULL || dp2 == NULL)        return -1;    while (1) {        UINT8 type1, type2;        UINT8 subtype1, subtype2;        UINT16 len1, len2;        INTN ret;        type1 = DevicePathType(dp1);        type2 = DevicePathType(dp2);        if (type1 != type2)                return (int) type2 - (int) type1;        subtype1 = DevicePathSubType(dp1);        subtype2 = DevicePathSubType(dp2);        if (subtype1 != subtype2)                return (int) subtype1 - (int) subtype2;        len1 = DevicePathNodeLength(dp1);        len2 = DevicePathNodeLength(dp2);        if (len1 != len2)                return (int) len1 - (int) len2;        ret = CompareMem(dp1, dp2, len1);        if (ret != 0)                return ret;        if (IsDevicePathEnd(dp1))                break;        dp1 = (EFI_DEVICE_PATH*) ((char *)dp1 + len1);        dp2 = (EFI_DEVICE_PATH*) ((char *)dp2 + len2);    }    return 0;}

/**  Check to see if this driver supports the given controller  @param  This                 A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.  @param  Controller           The handle of the controller to test.  @param  RemainingDevicePath  A pointer to the remaining portion of a device path.  @return EFI_SUCCESS          This driver can support the given controller**/EFI_STATUSEFIAPISerialControllerDriverSupported (  IN EFI_DRIVER_BINDING_PROTOCOL    *This,  IN EFI_HANDLE                     Controller,  IN EFI_DEVICE_PATH_PROTOCOL       *RemainingDevicePath  ){  EFI_STATUS                                Status;  UART_DEVICE_PATH                          *Uart;  UART_FLOW_CONTROL_DEVICE_PATH             *FlowControl;  //  // Test RemainingDevicePath  //  if ((RemainingDevicePath != NULL) && !IsDevicePathEnd (RemainingDevicePath)) {    Status = EFI_UNSUPPORTED;    Uart = SkipControllerDevicePathNode (RemainingDevicePath, NULL, NULL);    if (DevicePathType (Uart) != MESSAGING_DEVICE_PATH ||        DevicePathSubType (Uart) != MSG_UART_DP ||        DevicePathNodeLength (Uart) != sizeof (UART_DEVICE_PATH)        ) {      return EFI_UNSUPPORTED;    }    //    // Do a rough check because Clock Rate is unknown until DriverBindingStart()    //    if (!VerifyUartParameters (0, Uart->BaudRate, Uart->DataBits, Uart->Parity, Uart->StopBits, NULL, NULL)) {      return EFI_UNSUPPORTED;    }    FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart);    if (IsUartFlowControlDevicePathNode (FlowControl)) {      //      // If the second node is Flow Control Node,      //   return error when it request other than hardware flow control.      //      if ((ReadUnaligned32 (&FlowControl->FlowControlMap) & ~UART_FLOW_CONTROL_HARDWARE) != 0) {        return EFI_UNSUPPORTED;      }    }  }  Status = IsSioSerialController (Controller);  if (EFI_ERROR (Status)) {    Status = IsPciSerialController (Controller);  }  return Status;}

static VOID_DevPathFibre (    IN OUT POOL_PRINT       *Str,    IN VOID                 *DevPath    ){    FIBRECHANNEL_DEVICE_PATH    *Fibre;    Fibre = DevPath;    CatPrint( Str , L"Fibre%s(0x%016lx,0x%016lx)" ,        DevicePathType( & Fibre-> Header ) == MSG_FIBRECHANNEL_DP ? L"" : L"Ex" ,        Fibre-> WWN , Fibre-> Lun ) ;}

VOIDSEnvPrintDevicePathEntry (  IN EFI_DEVICE_PATH_PROTOCOL     *DevicePath,  IN BOOLEAN                      Verbose  )/*++Routine Description:Arguments:  DevicePath - The device path  Verbose    - VerboseReturns:--*/{  UINT8 Type;  UINT8 SubType;  INTN  Index;  //  // Process print device path entry  //  Type    = (UINT8) DevicePathType (DevicePath);  SubType = DevicePathSubType (DevicePath);  for (Index = 0; SEnvDP_Strings[Index].Type != END_DEVICE_PATH_TYPE; Index++) {    if (Type == SEnvDP_Strings[Index].Type) {      if (SubType > SEnvDP_Strings[Index].MaxSubType) {        SubType = 0;      }      PrintToken (        STRING_TOKEN (STR_SHELLENV_DPROT_DEVICE_PATH_FOR),        HiiEnvHandle,        SEnvDP_Strings[Index].TypeString,        SEnvDP_Strings[Index].SubTypeStr[SubType]        );      if (Verbose) {        if (SEnvDP_Strings[Index].Function != NULL) {          SEnvDP_Strings[Index].Function (DevicePath);        }      }      return ;    }  }  PrintToken (STRING_TOKEN (STR_SHELLENV_DPROT_DEVICE_PATH_ERROR), HiiEnvHandle);}

/**  Get the URI address string from the input device path.  Caller need to free the buffer in the UriAddress pointer.    @param[in]   FilePath         Pointer to the device path which contains a URI device path node.  @param[out]  UriAddress       The URI address string extract from the device path.    @retval EFI_SUCCESS            The URI string is returned.  @retval EFI_OUT_OF_RESOURCES   Failed to allocate memory.**/EFI_STATUSHttpBootParseFilePath (  IN     EFI_DEVICE_PATH_PROTOCOL     *FilePath,     OUT CHAR8                        **UriAddress  ){  EFI_DEVICE_PATH_PROTOCOL  *TempDevicePath;  URI_DEVICE_PATH           *UriDevicePath;  CHAR8                     *Uri;  UINTN                     UriStrLength;  if (FilePath == NULL) {    return EFI_INVALID_PARAMETER;  }  *UriAddress = NULL;  //  // Extract the URI address from the FilePath  //  TempDevicePath = FilePath;  while (!IsDevicePathEnd (TempDevicePath)) {    if ((DevicePathType (TempDevicePath) == MESSAGING_DEVICE_PATH) &&        (DevicePathSubType (TempDevicePath) == MSG_URI_DP)) {      UriDevicePath = (URI_DEVICE_PATH*) TempDevicePath;      //      // UEFI Spec doesn't require the URI to be a NULL-terminated string      // So we allocate a new buffer and always append a '/0' to it.      //      UriStrLength = DevicePathNodeLength (UriDevicePath) - sizeof(EFI_DEVICE_PATH_PROTOCOL);      if (UriStrLength == 0) {        //        // return a NULL UriAddress if it's a empty URI device path node.        //        break;      }      Uri = AllocatePool (UriStrLength + 1);      if (Uri == NULL) {        return EFI_OUT_OF_RESOURCES;      }      CopyMem (Uri, UriDevicePath->Uri, DevicePathNodeLength (UriDevicePath) - sizeof(EFI_DEVICE_PATH_PROTOCOL));      Uri[DevicePathNodeLength (UriDevicePath) - sizeof(EFI_DEVICE_PATH_PROTOCOL)] = '/0';      *UriAddress = Uri;    }    TempDevicePath = NextDevicePathNode (TempDevicePath);  }  return EFI_SUCCESS;}

EFIAPIEfiGetNameGuidFromFwVolDevicePathNode (    IN CONST MEDIA_FW_VOL_FILEPATH_DEVICE_PATH  *FvDevicePathNode){    ASSERT (FvDevicePathNode != NULL);    if (DevicePathType (&FvDevicePathNode->Header) == MEDIA_DEVICE_PATH &&            DevicePathSubType (&FvDevicePathNode->Header) == MEDIA_PIWG_FW_FILE_DP) {        return (EFI_GUID *) &FvDevicePathNode->FvFileName;    }    return NULL;}

/**  Function to walk the device path looking for a dumpable node.  @param[in] MappingItem      The Item to fill with data.  @param[in] DevicePath       The path of the item to get data on.  @return EFI_SUCCESS         Always returns success.**/EFI_STATUSEFIAPIGetDeviceConsistMappingInfo (  IN DEVICE_CONSIST_MAPPING_INFO    *MappingItem,  IN EFI_DEVICE_PATH_PROTOCOL       *DevicePath  ){  VOID (EFIAPI *SerialFun) (EFI_DEVICE_PATH_PROTOCOL *, DEVICE_CONSIST_MAPPING_INFO *);  UINTN Index;  ASSERT(DevicePath != NULL);  ASSERT(MappingItem != NULL);  SetMem (&MappingItem->Csd, sizeof (POOL_PRINT), 0);  while (!IsDevicePathEnd (DevicePath)) {    //    // Find the handler to dump this device path node    //    SerialFun = NULL;    for (Index = 0; DevPathConsistMappingTable[Index].SerialFun != NULL; Index += 1) {      if (DevicePathType (DevicePath) == DevPathConsistMappingTable[Index].Type &&          DevicePathSubType (DevicePath) == DevPathConsistMappingTable[Index].SubType         ) {        SerialFun = DevPathConsistMappingTable[Index].SerialFun;        break;      }    }    //    // If not found, use a generic function    //    if (!SerialFun) {      SerialFun = DevPathSerialDefault;    }    SerialFun (DevicePath, MappingItem);    //    // Next device path node    //    DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) NextDevicePathNode (DevicePath);  }  return EFI_SUCCESS;}

static INTNsimple_scheme(device_t *tab, UINTN n){	EFI_DEVICE_PATH *dp1, *dp;	devices_types_t *p;	UINTN i;	/*	 * note that this test is necessary but not sufficient to guarantee that this scheme	 * will work because, we have no way of detecting that the machine got actually	 * rebooted if the EDD30 variable was forced. this comes from the fact, that elilo	 * can be invoked once, aborted and then restarted with no machine reboot.	 *	 * XXX: there may be a way to detect this with the another variable which would	 * be in volatile memory only	 */	if (elilo_opt.edd30_on == 0) {		VERB_PRT(4, Print(L"%s device naming scheme only works with EDD3.0 enabled/n", NAMING_SCHEME));		return -1;	}	for(i=0; i < n; i++) {		dp = DevicePathFromHandle(tab[i].dev);		if (dp == NULL) {			ERR_PRT((L"cannot get device path for device %d", i));			continue;		}		dp1 = dp = UnpackDevicePath(dp);		while (!IsDevicePathEnd(dp)) {			p = dev_types;			while (p->type) {				if (   p->type == DevicePathType(dp) 				    && p->subtype == DevicePathSubType(dp)) {					(*p->device_func)(tab+i, dp);				        goto done;				}				p++;			}        		dp = NextDevicePathNode(dp);		}done:       		FreePool(dp1); 	}	return 0;}

EFIAPIEfiGetNameGuidFromFwVolDevicePathNode (  IN CONST MEDIA_FW_VOL_FILEPATH_DEVICE_PATH  *FvDevicePathNode  ){  ASSERT (FvDevicePathNode != NULL);  //  // EFI Specification extension on Media Device Path. MEDIA_FW_VOL_FILEPATH_DEVICE_PATH is adopted by UEFI later and added in UEFI2.10.  // In EdkCompatibility Package, we only support MEDIA_FW_VOL_FILEPATH_DEVICE_PATH that complies with  // EFI 1.10 and UEFI 2.10.  //  if (DevicePathType (&FvDevicePathNode->Header) == MEDIA_DEVICE_PATH &&      DevicePathSubType (&FvDevicePathNode->Header) == MEDIA_PIWG_FW_FILE_DP) {    return (EFI_GUID *) &FvDevicePathNode->FvFileName;  }  return NULL;}

 /**  Print information about the Load File devices.  If the device supports PXE dump out extra information  @param  File  Open File for the device**/VOIDEblPrintLoadFileInfo (  IN  EFI_OPEN_FILE   *File  ){  EFI_DEVICE_PATH_PROTOCOL    *DevicePathNode;  MAC_ADDR_DEVICE_PATH        *MacAddr;  UINTN                       HwAddressSize;  UINTN                       Index;  if (File == NULL) {    return;  }  AsciiPrint ("  %a: %a ", File->DeviceName, EblLoadFileBootTypeString (File->EfiHandle));  if (File->DevicePath != NULL) {    // Try to print out the MAC address    for (DevicePathNode = File->DevicePath;        !IsDevicePathEnd (DevicePathNode);        DevicePathNode = NextDevicePathNode (DevicePathNode)) {      if ((DevicePathType (DevicePathNode) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (DevicePathNode) == MSG_MAC_ADDR_DP)) {        MacAddr = (MAC_ADDR_DEVICE_PATH *)DevicePathNode;        HwAddressSize = sizeof (EFI_MAC_ADDRESS);        if (MacAddr->IfType == 0x01 || MacAddr->IfType == 0x00) {          HwAddressSize = 6;        }        AsciiPrint ("MAC ");        for (Index = 0; Index < HwAddressSize; Index++) {          AsciiPrint ("%02x", MacAddr->MacAddress.Addr[Index] & 0xff);        }      }    }  }  AsciiPrint ("/n");  EfiClose (File);  return;}

static EFI_STATUSFindSubDevicePath(EFI_DEVICE_PATH *In, UINT8 Type, UINT8 SubType,		  EFI_DEVICE_PATH **Out){	EFI_DEVICE_PATH *dp = In;	if (!In || !Out)		return EFI_INVALID_PARAMETER;	for (dp = In; !IsDevicePathEnd(dp); dp = NextDevicePathNode(dp)) {		if (DevicePathType(dp) == Type &&				DevicePathSubType(dp) == SubType) {			*Out = DuplicateDevicePath(dp);			if (!*Out)				return EFI_OUT_OF_RESOURCES;			return EFI_SUCCESS;		}	}	*Out = NULL;	return EFI_NOT_FOUND;}

/**  Retrieve ACPI UID of UART from device path  @param Handle          The handle for the UART device.  @param AcpiUid         The ACPI UID on output.  @retval  TRUE   Find valid UID from device path  @retval  FALSE  Can't find**/BOOLEANRetrieveUartUid (  IN EFI_HANDLE   Handle,  IN OUT UINT32   *AcpiUid  ){  EFI_STATUS                Status;  ACPI_HID_DEVICE_PATH      *Acpi;  EFI_DEVICE_PATH_PROTOCOL  *DevicePath;  Status = gBS->HandleProtocol (                  Handle,                  &gEfiDevicePathProtocolGuid,                  (VOID **) &DevicePath                  );  if (EFI_ERROR (Status)) {    return FALSE;  }  Acpi = NULL;  for (; !IsDevicePathEnd (DevicePath); DevicePath = NextDevicePathNode (DevicePath)) {    if ((DevicePathType (DevicePath) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (DevicePath) == MSG_UART_DP)) {      break;    }    //    // Acpi points to the node before the Uart node    //    Acpi = (ACPI_HID_DEVICE_PATH *) DevicePath;  }  if ((Acpi != NULL) && IsIsaSerialNode (Acpi)) {    if (AcpiUid != NULL) {      CopyMem (AcpiUid, &Acpi->UID, sizeof (UINT32));    }    return TRUE;  } else {    return FALSE;  }}

//.........这里部分代码省略.........                  &gEfiFirmwareVolume2ProtocolGuid,                  &TempDevicePath,                  &DeviceHandle                  );  if (!EFI_ERROR (Status)) {    Status = gBS->OpenProtocol (                    DeviceHandle,                    &gEfiFirmwareVolume2ProtocolGuid,                    NULL,                    NULL,                    NULL,                    EFI_OPEN_PROTOCOL_TEST_PROTOCOL                    );    if (!EFI_ERROR (Status)) {      return IMAGE_FROM_FV;    }  }  //  // Next check to see if File is from a Block I/O device  //  DeviceHandle   = NULL;  TempDevicePath = (EFI_DEVICE_PATH_PROTOCOL *)File;  Status = gBS->LocateDevicePath (                  &gEfiBlockIoProtocolGuid,                  &TempDevicePath,                  &DeviceHandle                  );  if (!EFI_ERROR (Status)) {    BlockIo = NULL;    Status = gBS->OpenProtocol (                    DeviceHandle,                    &gEfiBlockIoProtocolGuid,                    (VOID **) &BlockIo,                    NULL,                    NULL,                    EFI_OPEN_PROTOCOL_GET_PROTOCOL                    );    if (!EFI_ERROR (Status) && BlockIo != NULL) {      if (BlockIo->Media != NULL) {        if (BlockIo->Media->RemovableMedia) {          //          // Block I/O is present and specifies the media is removable          //          return IMAGE_FROM_REMOVABLE_MEDIA;        } else {          //          // Block I/O is present and specifies the media is not removable          //          return IMAGE_FROM_FIXED_MEDIA;        }      }    }  }  //  // File is not in a Firmware Volume or on a Block I/O device, so check to see if  // the device path supports the Simple File System Protocol.  //  DeviceHandle   = NULL;  TempDevicePath = (EFI_DEVICE_PATH_PROTOCOL *)File;  Status = gBS->LocateDevicePath (                  &gEfiSimpleFileSystemProtocolGuid,                  &TempDevicePath,                  &DeviceHandle                  );  if (!EFI_ERROR (Status)) {    //    // Simple File System is present without Block I/O, so assume media is fixed.    //    return IMAGE_FROM_FIXED_MEDIA;  }  //  // File is not from an FV, Block I/O or Simple File System, so the only options  // left are a PCI Option ROM and a Load File Protocol such as a PXE Boot from a NIC.  //  TempDevicePath = (EFI_DEVICE_PATH_PROTOCOL *)File;  while (!IsDevicePathEndType (TempDevicePath)) {    switch (DevicePathType (TempDevicePath)) {    case MEDIA_DEVICE_PATH:      if (DevicePathSubType (TempDevicePath) == MEDIA_RELATIVE_OFFSET_RANGE_DP) {        return IMAGE_FROM_OPTION_ROM;      }      break;    case MESSAGING_DEVICE_PATH:      if (DevicePathSubType(TempDevicePath) == MSG_MAC_ADDR_DP) {        return IMAGE_FROM_REMOVABLE_MEDIA;      }      break;    default:      break;    }    TempDevicePath = NextDevicePathNode (TempDevicePath);  }  return IMAGE_UNKNOWN;}

/**  Get file name from device path.  The file name may contain one or more device path node. Save the file name in a  buffer if file name is found. The caller is responsible to free the buffer.  @param[in]  DevicePath     A pointer to a device path.  @param[out] FileName       The callee allocated buffer to save the file name if file name is found.  @param[out] FileNameOffset The offset of file name in device path if file name is found.  @retval     UINTN          The file name length. 0 means file name is not found.**/UINTNGetFileName (  IN  CONST EFI_DEVICE_PATH_PROTOCOL          *DevicePath,  OUT UINT8                                   **FileName,  OUT UINTN                                   *FileNameOffset  ){  UINTN                                       Length;  EFI_DEVICE_PATH_PROTOCOL                    *TmpDevicePath;  EFI_DEVICE_PATH_PROTOCOL                    *RootDevicePath;  CHAR8                                       *NodeStr;  UINTN                                       NodeStrLength;  CHAR16                                      LastNodeChar;  CHAR16                                      FirstNodeChar;  //  // Get the length of DevicePath before file name.  //  Length = 0;  RootDevicePath = (EFI_DEVICE_PATH_PROTOCOL *)DevicePath;  while (!IsDevicePathEnd (RootDevicePath)) {    if ((DevicePathType(RootDevicePath) == MEDIA_DEVICE_PATH) && (DevicePathSubType(RootDevicePath) == MEDIA_FILEPATH_DP)) {      break;    }    Length += DevicePathNodeLength (RootDevicePath);    RootDevicePath = NextDevicePathNode (RootDevicePath);  }  *FileNameOffset = Length;  if (Length == 0) {    return 0;  }  //  // Get the file name length.  //  Length = 0;  TmpDevicePath = RootDevicePath;  while (!IsDevicePathEnd (TmpDevicePath)) {    if ((DevicePathType(TmpDevicePath) != MEDIA_DEVICE_PATH) || (DevicePathSubType(TmpDevicePath) != MEDIA_FILEPATH_DP)) {      break;    }    Length += DevicePathNodeLength (TmpDevicePath) - sizeof (EFI_DEVICE_PATH_PROTOCOL);    TmpDevicePath = NextDevicePathNode (TmpDevicePath);  }  if (Length == 0) {    return 0;  }  *FileName = AllocateZeroPool (Length);  ASSERT (*FileName != NULL);  //  // Copy the file name to the buffer.  //  Length = 0;  LastNodeChar = '//';  TmpDevicePath = RootDevicePath;  while (!IsDevicePathEnd (TmpDevicePath)) {    if ((DevicePathType(TmpDevicePath) != MEDIA_DEVICE_PATH) || (DevicePathSubType(TmpDevicePath) != MEDIA_FILEPATH_DP)) {      break;    }    FirstNodeChar = (CHAR16) ReadUnaligned16 ((UINT16 *)((UINT8 *)TmpDevicePath + sizeof (EFI_DEVICE_PATH_PROTOCOL)));    NodeStr = (CHAR8 *)TmpDevicePath + sizeof (EFI_DEVICE_PATH_PROTOCOL);    NodeStrLength = DevicePathNodeLength (TmpDevicePath) - sizeof (EFI_DEVICE_PATH_PROTOCOL) - sizeof(CHAR16);    if ((FirstNodeChar == '//') && (LastNodeChar == '//')) {      //      // Skip separator "/" when there are two separators.      //      NodeStr += sizeof (CHAR16);      NodeStrLength -= sizeof (CHAR16);    } else if ((FirstNodeChar != '//') && (LastNodeChar != '//')) {      //      // Add separator "/" when there is no separator.      //      WriteUnaligned16 ((UINT16 *)(*FileName + Length), '//');      Length += sizeof (CHAR16);    }    CopyMem (*FileName + Length, NodeStr, NodeStrLength);    Length += NodeStrLength;    LastNodeChar  = (CHAR16) ReadUnaligned16 ((UINT16 *) (NodeStr + NodeStrLength - sizeof(CHAR16)));    TmpDevicePath = NextDevicePathNode (TmpDevicePath);  }//.........这里部分代码省略.........

/**  For a bootable Device path, return its boot type.  @param  DevicePath        The bootable device Path to check  @retval AcpiFloppyBoot    If given device path contains ACPI_DEVICE_PATH type device path node                            which HID is floppy device.  @retval MessageAtapiBoot  If given device path contains MESSAGING_DEVICE_PATH type device path node                            and its last device path node's subtype is MSG_ATAPI_DP.  @retval MessageSataBoot   If given device path contains MESSAGING_DEVICE_PATH type device path node                            and its last device path node's subtype is MSG_SATA_DP.  @retval MessageScsiBoot   If given device path contains MESSAGING_DEVICE_PATH type device path node                            and its last device path node's subtype is MSG_SCSI_DP.  @retval MessageUsbBoot    If given device path contains MESSAGING_DEVICE_PATH type device path node                            and its last device path node's subtype is MSG_USB_DP.  @retval BmMiscBoot        If tiven device path doesn't match the above condition.**/BM_BOOT_TYPEBmDevicePathType (  IN  EFI_DEVICE_PATH_PROTOCOL     *DevicePath  ){  EFI_DEVICE_PATH_PROTOCOL      *Node;  EFI_DEVICE_PATH_PROTOCOL      *NextNode;  ASSERT (DevicePath != NULL);  for (Node = DevicePath; !IsDevicePathEndType (Node); Node = NextDevicePathNode (Node)) {    switch (DevicePathType (Node)) {      case ACPI_DEVICE_PATH:        if (EISA_ID_TO_NUM (((ACPI_HID_DEVICE_PATH *) Node)->HID) == 0x0604) {          return BmAcpiFloppyBoot;        }        break;      case HARDWARE_DEVICE_PATH:        if (DevicePathSubType (Node) == HW_CONTROLLER_DP) {          return BmHardwareDeviceBoot;        }        break;      case MESSAGING_DEVICE_PATH:        //        // Skip LUN device node        //        NextNode = Node;        do {          NextNode = NextDevicePathNode (NextNode);        } while (            (DevicePathType (NextNode) == MESSAGING_DEVICE_PATH) &&            (DevicePathSubType(NextNode) == MSG_DEVICE_LOGICAL_UNIT_DP)            );        //        // If the device path not only point to driver device, it is not a messaging device path,        //        if (!IsDevicePathEndType (NextNode)) {          continue;        }        switch (DevicePathSubType (Node)) {        case MSG_ATAPI_DP:          return BmMessageAtapiBoot;          break;        case MSG_SATA_DP:          return BmMessageSataBoot;          break;        case MSG_USB_DP:          return BmMessageUsbBoot;          break;        case MSG_SCSI_DP:          return BmMessageScsiBoot;          break;        }    }  }  return BmMiscBoot;}

/**  Return the description for network boot device.  @param Handle                Controller handle.  @return  The description string.**/CHAR16 *BmGetNetworkDescription (  IN EFI_HANDLE                  Handle  ){  EFI_STATUS                     Status;  EFI_DEVICE_PATH_PROTOCOL       *DevicePath;  MAC_ADDR_DEVICE_PATH           *Mac;  VLAN_DEVICE_PATH               *Vlan;  EFI_DEVICE_PATH_PROTOCOL       *Ip;  EFI_DEVICE_PATH_PROTOCOL       *Uri;  CHAR16                         *Description;  UINTN                          DescriptionSize;  Status = gBS->OpenProtocol (                  Handle,                  &gEfiLoadFileProtocolGuid,                  NULL,                  gImageHandle,                  Handle,                  EFI_OPEN_PROTOCOL_TEST_PROTOCOL                  );  if (EFI_ERROR (Status)) {    return NULL;  }  Status = gBS->OpenProtocol (                  Handle,                  &gEfiDevicePathProtocolGuid,                  (VOID **) &DevicePath,                  gImageHandle,                  Handle,                  EFI_OPEN_PROTOCOL_GET_PROTOCOL                  );  if (EFI_ERROR (Status) || (DevicePath == NULL)) {    return NULL;  }  //  // The PXE device path is like:  //   ....../Mac(...)[/Vlan(...)]  //   ....../Mac(...)[/Vlan(...)]/IPv4(...)  //   ....../Mac(...)[/Vlan(...)]/IPv6(...)  //  // The HTTP device path is like:  //   ....../Mac(...)[/Vlan(...)]/IPv4(...)/Uri(...)  //   ....../Mac(...)[/Vlan(...)]/IPv6(...)/Uri(...)  //  while (!IsDevicePathEnd (DevicePath) &&         ((DevicePathType (DevicePath) != MESSAGING_DEVICE_PATH) ||          (DevicePathSubType (DevicePath) != MSG_MAC_ADDR_DP))         ) {    DevicePath = NextDevicePathNode (DevicePath);  }  if (IsDevicePathEnd (DevicePath)) {    return NULL;  }  Mac = (MAC_ADDR_DEVICE_PATH *) DevicePath;  DevicePath = NextDevicePathNode (DevicePath);  if ((DevicePathType (DevicePath) == MESSAGING_DEVICE_PATH) &&      (DevicePathSubType (DevicePath) == MSG_VLAN_DP)      ) {    Vlan = (VLAN_DEVICE_PATH *) DevicePath;    DevicePath = NextDevicePathNode (DevicePath);  } else {    Vlan = NULL;  }  if ((DevicePathType (DevicePath) == MESSAGING_DEVICE_PATH) &&      ((DevicePathSubType (DevicePath) == MSG_IPv4_DP) ||       (DevicePathSubType (DevicePath) == MSG_IPv6_DP))      ) {    Ip = DevicePath;    DevicePath = NextDevicePathNode (DevicePath);  } else {    Ip = NULL;  }  if ((DevicePathType (DevicePath) == MESSAGING_DEVICE_PATH) &&      (DevicePathSubType (DevicePath) == MSG_URI_DP)      ) {    Uri = DevicePath;    DevicePath = NextDevicePathNode (DevicePath);  } else {    Uri = NULL;  }  //  // Build description like below:  //   "PXEv6 (MAC:112233445566 VLAN1)"//.........这里部分代码省略.........

/**  This function invokes Boot Manager. If all devices have not a chance to be connected,  the connect all will be triggered. It then enumerate all boot options. If   a boot option from the Boot Manager page is selected, Boot Manager will boot  from this boot option.  **/VOIDUpdateBootManager (  VOID  ){  UINTN                         Index;  EFI_BOOT_MANAGER_LOAD_OPTION  *BootOption;  UINTN                         BootOptionCount;  EFI_STRING_ID                 Token;  CHAR16                        *HelpString;  EFI_STRING_ID                 HelpToken;  UINT16                        *TempStr;  EFI_HII_HANDLE                HiiHandle;  UINTN                         TempSize;  VOID                          *StartOpCodeHandle;  VOID                          *EndOpCodeHandle;  EFI_IFR_GUID_LABEL            *StartLabel;  EFI_IFR_GUID_LABEL            *EndLabel;  UINT16                        DeviceType;  BOOLEAN                       IsLegacyOption;  BOOLEAN                       NeedEndOp;  UINTN                         MaxLen;  DeviceType = (UINT16) -1;  EfiBootManagerConnectAll ();  //  // for better user experience  // 1. User changes HD configuration (e.g.: unplug HDD), here we have a chance to remove the HDD boot option  // 2. User enables/disables UEFI PXE, here we have a chance to add/remove EFI Network boot option  //  EfiBootManagerRefreshAllBootOption ();  //  // BdsDxe doesn't group the legacy boot options for the same device type  // It's UI's choice.  //  GroupMultipleLegacyBootOption4SameType ();  BootOption = EfiBootManagerGetLoadOptions (&BootOptionCount, LoadOptionTypeBoot);  HiiHandle = gBootManagerPrivate.HiiHandle;  //  // Allocate space for creation of UpdateData Buffer  //  StartOpCodeHandle = HiiAllocateOpCodeHandle ();  ASSERT (StartOpCodeHandle != NULL);  EndOpCodeHandle = HiiAllocateOpCodeHandle ();  ASSERT (EndOpCodeHandle != NULL);  //  // Create Hii Extend Label OpCode as the start opcode  //  StartLabel = (EFI_IFR_GUID_LABEL *) HiiCreateGuidOpCode (StartOpCodeHandle, &gEfiIfrTianoGuid, NULL, sizeof (EFI_IFR_GUID_LABEL));  StartLabel->ExtendOpCode = EFI_IFR_EXTEND_OP_LABEL;  StartLabel->Number       = LABEL_BOOT_OPTION;  //  // Create Hii Extend Label OpCode as the end opcode  //  EndLabel = (EFI_IFR_GUID_LABEL *) HiiCreateGuidOpCode (EndOpCodeHandle, &gEfiIfrTianoGuid, NULL, sizeof (EFI_IFR_GUID_LABEL));  EndLabel->ExtendOpCode = EFI_IFR_EXTEND_OP_LABEL;  EndLabel->Number       = LABEL_BOOT_OPTION_END;  mKeyInput = 0;  NeedEndOp = FALSE;  for (Index = 0; Index < BootOptionCount; Index++) {    //    // At this stage we are creating a menu entry, thus the Keys are reproduceable    //    mKeyInput++;    //    // Don't display the hidden/inactive boot option    //    if (((BootOption[Index].Attributes & LOAD_OPTION_HIDDEN) != 0) || ((BootOption[Index].Attributes & LOAD_OPTION_ACTIVE) == 0)) {      continue;    }    //    // Group the legacy boot option in the sub title created dynamically    //    IsLegacyOption = (BOOLEAN) (                       (DevicePathType (BootOption[Index].FilePath) == BBS_DEVICE_PATH) &&                       (DevicePathSubType (BootOption[Index].FilePath) == BBS_BBS_DP)                       );    if (!IsLegacyOption && NeedEndOp) {      NeedEndOp = FALSE;      HiiCreateEndOpCode (StartOpCodeHandle);    }//.........这里部分代码省略.........