这篇教程C++ EASValsSetLayer函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中EASValsSetLayer函数的典型用法代码示例。如果您正苦于以下问题：C++ EASValsSetLayer函数的具体用法？C++ EASValsSetLayer怎么用？C++ EASValsSetLayer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了EASValsSetLayer函数的30个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: drawDeformedGeometryvoid LIBeam3dNL :: drawDeformedGeometry(oofegGraphicContext &gc, UnknownType type){ GraphicObj *go; if ( !gc.testElementGraphicActivity(this) ) { return; } TimeStep *tStep = domain->giveEngngModel()->giveCurrentStep(); double defScale = gc.getDefScale(); // if (!go) { // create new one WCRec p [ 2 ]; /* poin */ EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale); p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale); p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale); p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale); go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:26，
示例2: drawRawGeometryvoid InterfaceElem2dQuad :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep){ GraphicObj *go; // if (!go) { // create new one WCRec p [ 2 ]; /* poin */ if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getElementColor() ); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2); p [ 0 ].z = 0.0; p [ 1 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1); p [ 1 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2); p [ 1 ].z = 0.0; go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go); p [ 0 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1); p [ 0 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2); p [ 0 ].z = 0.0; p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2); p [ 1 ].z = 0.0; go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:rreissnerr，项目名称:oofem，代码行数:33，
示例3: drawRawCrossSectionsvoidLattice2d :: drawRawCrossSections(oofegGraphicContext &gc, TimeStep *tStep){ GraphicObj *go; // if (!go) { // create new one WCRec p [ 2 ]; /* poin */ if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getCrossSectionColor() ); EASValsSetLayer(OOFEG_RAW_CROSSSECTION_LAYER); FloatArray coords; this->giveCrossSectionCoordinates(coords); p [ 0 ].x = ( FPNum ) coords.at(1); p [ 0 ].y = ( FPNum ) coords.at(2); p [ 0 ].z = ( FPNum ) coords.at(3); p [ 1 ].x = ( FPNum ) coords.at(4); p [ 1 ].y = ( FPNum ) coords.at(5); p [ 1 ].z = ( FPNum ) coords.at(6); go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:30，
示例4: drawRawGeometryvoidTR_SHELL02 :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep){ WCRec p [ 3 ]; GraphicObj *go; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( this->giveMaterial()->isActivated(tStep) ) { EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetFillStyle(FILL_SOLID); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2); p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(3); p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2); p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(3); p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1); p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2); p [ 2 ].z = ( FPNum ) this->giveNode(3)->giveCoordinate(3); go = CreateTriangle3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go); }}
开发者ID:rainbowlqs，项目名称:oofem，代码行数:33，
示例5: drawDeformedGeometryvoid InterfaceElem2dQuad :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type){ GraphicObj *go; // if (!go) { // create new one WCRec p [ 2 ]; /* poin */ if ( !gc.testElementGraphicActivity(this) ) { return; } double defScale = gc.getDefScale(); EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER + 1); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale); p [ 0 ].z = 0.0; p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale); p [ 1 ].z = 0.0; go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go); p [ 0 ].x = ( FPNum ) this->giveNode(4)->giveUpdatedCoordinate(1, tStep, defScale); p [ 0 ].y = ( FPNum ) this->giveNode(4)->giveUpdatedCoordinate(2, tStep, defScale); p [ 0 ].z = 0.0; p [ 1 ].x = ( FPNum ) this->giveNode(5)->giveUpdatedCoordinate(1, tStep, defScale); p [ 1 ].y = ( FPNum ) this->giveNode(5)->giveUpdatedCoordinate(2, tStep, defScale); p [ 1 ].z = 0.0; go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:rreissnerr，项目名称:oofem，代码行数:34，
示例6: drawDeformedGeometryvoid LSpace :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type){ int i; WCRec p [ 8 ]; GraphicObj *go; double defScale = gc.getDefScale(); if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); EASValsSetFillStyle(FILL_SOLID); for ( i = 0; i < 8; i++ ) { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale); } go = CreateHexahedron(p); EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:rreissnerr，项目名称:oofem，代码行数:27，
示例7: drawDeformedGeometryvoidTR_SHELL02 :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type){ WCRec p [ 3 ]; GraphicObj *go; double defScale = gc.getDefScale(); if ( !gc.testElementGraphicActivity(this) ) { return; } if ( this->giveMaterial()->isActivated(tStep) ) { EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetFillStyle(FILL_SOLID); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale); p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, defScale); p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale); p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(3, tStep, defScale); p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(1, tStep, defScale); p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(2, tStep, defScale); p [ 2 ].z = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(3, tStep, defScale); go = CreateTriangle3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go); }}
开发者ID:rainbowlqs，项目名称:oofem，代码行数:33，
示例8: drawRawGeometryvoid Brick1_ht :: drawRawGeometry(oofegGraphicContext &gc){ WCRec p [ 8 ]; GraphicObj *go; if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); EASValsSetFillStyle(FILL_SOLID); for ( int i = 0; i < 8; i++ ) { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3); } go = CreateHexahedron(p); EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:26，
示例9: drawRawGeometryvoid QTrPlaneStrain :: drawRawGeometry(oofegGraphicContext &gc){ WCRec p [ 3 ]; GraphicObj *go; if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2); p [ 0 ].z = 0.; p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2); p [ 1 ].z = 0.; p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1); p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2); p [ 2 ].z = 0.; go = CreateTriangle3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:29，
示例10: drawDeformedGeometryvoid QTrPlaneStrain :: drawDeformedGeometry(oofegGraphicContext &gc, UnknownType type){ WCRec p [ 3 ]; GraphicObj *go; TimeStep *tStep = domain->giveEngngModel()->giveCurrentStep(); double defScale = gc.getDefScale(); if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale); p [ 0 ].z = 0.; p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale); p [ 1 ].z = 0.; p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale); p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale); p [ 2 ].z = 0.; go = CreateTriangle3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:30，
示例11: drawScalarvoid InterfaceElem1d :: drawScalar(oofegGraphicContext &context){ int i, indx, result = 0; GaussPoint *gp; IntegrationRule *iRule = integrationRulesArray [ giveDefaultIntegrationRule() ]; TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep(); FloatArray gcoord(3), v1; WCRec p [ 1 ]; IntArray map; GraphicObj *go; double val [ 1 ]; if ( !context.testElementGraphicActivity(this) ) { return; } if ( context.getInternalVarsDefGeoFlag() ) { double defScale = context.getDefScale(); p [ 0 ].x = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale) + this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale) ); p [ 0 ].y = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale) + this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale) ); p [ 0 ].z = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale) + this->giveNode(2)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale) ); } else { p [ 0 ].x = ( FPNum )( this->giveNode(1)->giveCoordinate(1) ); p [ 0 ].y = ( FPNum )( this->giveNode(1)->giveCoordinate(2) ); p [ 0 ].z = ( FPNum )( this->giveNode(1)->giveCoordinate(3) ); } result += giveIPValue(v1, iRule->getIntegrationPoint(0), context.giveIntVarType(), tStep); for ( i = 0; i < iRule->getNumberOfIntegrationPoints(); i++ ) { result = 0; gp = iRule->getIntegrationPoint(i); result += giveIPValue(v1, gp, context.giveIntVarType(), tStep); result += this->giveIntVarCompFullIndx( map, context.giveIntVarType() ); if ( result != 2 ) { continue; } if ( ( indx = map.at( context.giveIntVarIndx() ) ) == 0 ) { return; } val [ 0 ] = v1.at(indx); context.updateFringeTableMinMax(val, 1); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); EASValsSetMType(FILLED_CIRCLE_MARKER); go = CreateMarkerWD3D(p, val [ 0 ]); EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go); EMAddGraphicsToModel(ESIModel(), go); //} }}
开发者ID:MartinFagerstrom，项目名称:oofem，代码行数:57，
示例12: drawScalarvoid LSpace :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int i, indx, result = 0; WCRec p [ 8 ]; GraphicObj *tr; FloatArray v [ 8 ]; double s [ 8 ], defScale = 0.0; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.giveIntVarMode() == ISM_recovered ) { for ( i = 1; i <= 8; i++ ) { result += this->giveInternalStateAtNode(v [ i - 1 ], gc.giveIntVarType(), gc.giveIntVarMode(), i, tStep); } if ( result != 8 ) { return; } } else if ( gc.giveIntVarMode() == ISM_local ) { return; } indx = gc.giveIntVarIndx(); for ( i = 1; i <= 8; i++ ) { s [ i - 1 ] = v [ i - 1 ].at(indx); } EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( gc.getScalarAlgo() == SA_ISO_SURF ) { for ( i = 0; i < 8; i++ ) { if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = gc.getDefScale(); p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale); } else { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3); } } gc.updateFringeTableMinMax(s, 8); tr = CreateHexahedronWD(p, s); EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); }}
开发者ID:rreissnerr，项目名称:oofem，代码行数:54，
示例13: drawScalarvoid IntElPoint :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int indx, result = 0; IntegrationRule *iRule = this->giveDefaultIntegrationRulePtr(); FloatArray gcoord(3), v1; WCRec p [ 1 ]; GraphicObj *go; double val [ 1 ]; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.getInternalVarsDefGeoFlag() ) { double defScale = gc.getDefScale(); p [ 0 ].x = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale) + this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale) ); p [ 0 ].y = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale) + this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale) ); p [ 0 ].z = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(3, tStep, defScale) + this->giveNode(2)->giveUpdatedCoordinate(3, tStep, defScale) ); } else { p [ 0 ].x = ( FPNum ) ( this->giveNode(1)->giveCoordinate(1) ); p [ 0 ].y = ( FPNum ) ( this->giveNode(1)->giveCoordinate(2) ); p [ 0 ].z = ( FPNum ) ( this->giveNode(1)->giveCoordinate(3) ); } result += giveIPValue(v1, iRule->getIntegrationPoint(0), gc.giveIntVarType(), tStep); for ( GaussPoint *gp: *iRule ) { result = 0; result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep); if ( result != 1 ) { continue; } indx = gc.giveIntVarIndx(); val [ 0 ] = v1.at(indx); gc.updateFringeTableMinMax(val, 1); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); EASValsSetMType(FILLED_CIRCLE_MARKER); go = CreateMarkerWD3D(p, val [ 0 ]); EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go); EMAddGraphicsToModel(ESIModel(), go); //} }}
开发者ID:erisve，项目名称:oofem，代码行数:50，
示例14: drawDeformedGeometryvoid CohesiveSurface3d :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type){ GraphicObj *go1, *go2; if ( !gc.testElementGraphicActivity(this) ) { return; } double defScale = gc.getDefScale(); WCRec p [ 2 ]; EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); // get the displaced particle coordinates Particle *nodeA = ( Particle * ) giveNode(1); Particle *nodeB = ( Particle * ) giveNode(2); p [ 0 ].x = nodeA->giveUpdatedCoordinate(1, tStep, defScale); p [ 0 ].y = nodeA->giveUpdatedCoordinate(2, tStep, defScale); p [ 0 ].z = nodeA->giveUpdatedCoordinate(3, tStep, defScale); p [ 1 ].x = nodeB->giveUpdatedCoordinate(1, tStep, defScale); p [ 1 ].y = nodeB->giveUpdatedCoordinate(2, tStep, defScale); p [ 1 ].z = nodeB->giveUpdatedCoordinate(3, tStep, defScale); // plot the displaced particles EASValsSetMType(FILLED_CIRCLE_MARKER); EASValsSetColor( gc.getNodeColor() ); EASValsSetMSize(6); // plot the first particle go1 = CreateMarker3D(p); EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go1); EMAddGraphicsToModel(ESIModel(), go1); // take into account periodic conditions if ( giveNumberOfNodes() == 3 ) { Node *nodeC = ( Particle * ) giveNode(3); p [ 1 ].x += kxa + kxa * defScale * ( nodeC->giveDofWithID(D_u)->giveUnknown(VM_Total, tStep) ) + kyb * defScale * ( nodeC->giveDofWithID(R_u)->giveUnknown(VM_Total, tStep) ); p [ 1 ].y += kyb + kyb * defScale * ( nodeC->giveDofWithID(D_v)->giveUnknown(VM_Total, tStep) ) + kzc * defScale * ( nodeC->giveDofWithID(R_v)->giveUnknown(VM_Total, tStep) ); p [ 1 ].z += kzc + kzc * defScale * ( nodeC->giveDofWithID(D_w)->giveUnknown(VM_Total, tStep) ) + kxa * defScale * ( nodeC->giveDofWithID(R_w)->giveUnknown(VM_Total, tStep) ); EASValsSetMType(CIRCLE_MARKER); } // plot the second particle go2 = CreateMarker3D(p + 1); EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go2); EMAddGraphicsToModel(ESIModel(), go2);}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:49，
示例15: drawSpecialvoidLattice2d :: drawSpecial(oofegGraphicContext &gc, TimeStep *tStep){ WCRec p [ 2 ]; GraphicObj *tr; GaussPoint *gp; FloatArray crackStatuses, cf; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.giveIntVarType() == IST_CrackState ) { gp = integrationRulesArray [ 0 ]->getIntegrationPoint(0); this->giveIPValue(crackStatuses, gp, IST_CrackStatuses, tStep); if ( crackStatuses(0) == 1. || crackStatuses(0) == 2. || crackStatuses(0) == 3 || crackStatuses(0) == 4 ) { FloatArray coords; this->giveCrossSectionCoordinates(coords); p [ 0 ].x = ( FPNum ) coords.at(1); p [ 0 ].y = ( FPNum ) coords.at(2); p [ 0 ].z = ( FPNum ) coords.at(3); p [ 1 ].x = ( FPNum ) coords.at(4); p [ 1 ].y = ( FPNum ) coords.at(5); p [ 1 ].z = ( FPNum ) coords.at(6); EASValsSetLayer(OOFEG_CRACK_PATTERN_LAYER); EASValsSetLineWidth(OOFEG_CRACK_PATTERN_WIDTH); if ( ( crackStatuses(0) == 1. ) ) { EASValsSetColor( gc.getActiveCrackColor() ); } else if ( crackStatuses(0) == 2. ) { EASValsSetColor( gc.getCrackPatternColor() ); } else if ( crackStatuses(0) == 3. ) { EASValsSetColor( gc.getActiveCrackColor() ); } else if ( crackStatuses(0) == 4. ) { EASValsSetColor( gc.getActiveCrackColor() ); } tr = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, tr); EGAttachObject(tr, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), tr); } }}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:47，
示例16: drawScalarvoid Brick1_ht :: drawScalar(oofegGraphicContext &context){ int indx, result = 0; WCRec p [ 8 ]; GraphicObj *tr; TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep(); FloatArray v [ 8 ]; double s [ 8 ]; if ( !context.testElementGraphicActivity(this) ) { return; } if ( context.giveIntVarMode() == ISM_recovered ) { for ( int i = 1; i <= 8; i++ ) { result += this->giveInternalStateAtNode(v [ i - 1 ], context.giveIntVarType(), context.giveIntVarMode(), i, tStep); } if ( result != 8 ) { return; } } else if ( context.giveIntVarMode() == ISM_local ) { return; } indx = context.giveIntVarIndx(); for ( int i = 1; i <= 8; i++ ) { s [ i - 1 ] = v [ i - 1 ].at(indx); } EASValsSetEdgeColor( context.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( context.getScalarAlgo() == SA_ISO_SURF ) { for ( int i = 0; i < 8; i++ ) { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3); } context.updateFringeTableMinMax(s, 8); tr = CreateHexahedronWD(p, s); EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); }}
开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:47，
示例17: drawScalarvoidTetrah1_ht :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int i, indx, result = 0; WCRec p [ 4 ]; GraphicObj *tr; FloatArray v [ 4 ]; double s [ 4 ]; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.giveIntVarMode() == ISM_recovered ) { for ( i = 1; i <= 4; i++ ) { result += this->giveInternalStateAtNode(v [ i - 1 ], gc.giveIntVarType(), gc.giveIntVarMode(), i, tStep); } if ( result != 4 ) { return; } } else if ( gc.giveIntVarMode() == ISM_local ) { return; } indx = gc.giveIntVarIndx(); for ( i = 1; i <= 4; i++ ) { s [ i - 1 ] = v [ i - 1 ].at(indx); } EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( gc.getScalarAlgo() == SA_ISO_SURF ) { for ( i = 0; i < 4; i++ ) { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3); } gc.updateFringeTableMinMax(s, 4); tr = CreateTetraWD(p, s); EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); }}
开发者ID:vivianyw，项目名称:oofem，代码行数:47，
示例18: drawScalarvoid IntElLine2 :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int indx, result = 0; IntegrationRule *iRule = this->giveDefaultIntegrationRulePtr(); FloatArray gcoord(3), v1; WCRec p [ 1 ]; GraphicObj *go; double val [ 1 ]; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.giveIntVarMode() == ISM_recovered ) { return; } for ( GaussPoint *gp: *iRule ) { result = 0; result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep); if ( result != 1 ) { continue; } indx = gc.giveIntVarIndx(); result += this->computeGlobalCoordinates( gcoord, gp->giveNaturalCoordinates() ); p [ 0 ].x = ( FPNum ) gcoord.at(1); p [ 0 ].y = ( FPNum ) gcoord.at(2); p [ 0 ].z = 0.; val [ 0 ] = v1.at(indx); gc.updateFringeTableMinMax(val, 1); //if (val[0] > 0.) { EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); EASValsSetMType(FILLED_CIRCLE_MARKER); go = CreateMarkerWD3D(p, val [ 0 ]); EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go); EMAddGraphicsToModel(ESIModel(), go); //} }}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:44，
示例19: drawRawGeometryvoid Truss2d :: drawRawGeometry(oofegGraphicContext &gc){ int c1, c2; resolveCoordIndices(c1, c2); GraphicObj *go; // if (!go) { // create new one WCRec p [ 2 ]; /* point */ if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getElementColor() ); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); if ( cs_mode == 0 ) { p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(c1); p [ 0 ].y = 0.; p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(c2); p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(c1); p [ 1 ].y = 0.; p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(c2); } else if ( cs_mode == 1 ) { p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(c1); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(c2); p [ 0 ].z = 0.; p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(c1); p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(c2); p [ 1 ].z = 0.; } else if ( cs_mode == 2 ) { p [ 0 ].x = 0.; p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(c1); p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(c2); p [ 1 ].x = 0.; p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(c1); p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(c2); } go = CreateLine3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:MartinFagerstrom，项目名称:oofem，代码行数:43，
示例20: drawRawGeometryvoid CohesiveSurface3d :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep){ if ( !gc.testElementGraphicActivity(this) ) { return; } //WCRec p[4]; GraphicObj *go; Particle *nodeA = ( Particle * ) this->giveNode(1); Particle *nodeB = ( Particle * ) this->giveNode(2); //double rA = nodeA -> giveRadius(); //double rB = nodeB -> giveRadius(); //double r = (rA+rB)/4.; EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH); EASValsSetColor( gc.getElementColor() ); EASValsSetEdgeColor( gc.getElementEdgeColor() ); EASValsSetEdgeFlag(true); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); WCRec pl [ 2 ]; // determine coordinates of the particles connected by this element pl [ 0 ].x = ( FPNum ) nodeA->giveCoordinate(1); pl [ 0 ].y = ( FPNum ) nodeA->giveCoordinate(2); pl [ 0 ].z = ( FPNum ) nodeA->giveCoordinate(3); pl [ 1 ].x = ( FPNum ) nodeB->giveCoordinate(1); pl [ 1 ].y = ( FPNum ) nodeB->giveCoordinate(2); pl [ 1 ].z = ( FPNum ) nodeB->giveCoordinate(3); if ( giveNumberOfNodes() == 3 ) { // the second particle should be shifted (periodic arrangement) Particle *nodeC = ( Particle * ) this->giveNode(3); pl [ 1 ].x += kx * ( nodeC->giveCoordinate(1) ); pl [ 1 ].y += ky * ( nodeC->giveCoordinate(2) ); pl [ 1 ].z += kz * ( nodeC->giveCoordinate(3) ); } // plot a line segment connecting the particles go = CreateLine3D(pl); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:43，
示例21: drawRawGeometryvoid LumpedMassElement :: drawRawGeometry(oofegGraphicContext &gc){ GraphicObj *go; WCRec p [ 1 ]; /* point */ if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetColor( gc.getElementColor() ); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); EASValsSetMType(SQUARE_MARKER); EASValsSetMSize(8); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2); p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(3); go = CreateMarker3D(p); EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:20，
示例22: drawDeformedGeometryvoid LumpedMassElement :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type){ GraphicObj *go; double defScale = gc.getDefScale(); WCRec p [ 1 ]; /* point */ if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); EASValsSetMType(SQUARE_MARKER); EASValsSetMSize(8); p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale); p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale); p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, defScale); go = CreateMarker3D(p); EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go); EGAttachObject(go, ( EObjectP ) this); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:aishugang，项目名称:oofem，代码行数:21，
示例23: drawRawGeometryvoid IntElPoint :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep){ GraphicObj *go; // if (!go) { // create new one WCRec p [ 1 ]; /* poin */ if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetColor( gc.getElementColor() ); EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER); EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); p [ 0 ].x = ( FPNum ) ( this->giveNode(1)->giveCoordinate(1) ); p [ 0 ].y = ( FPNum ) ( this->giveNode(1)->giveCoordinate(2) ); p [ 0 ].z = ( FPNum ) ( this->giveNode(1)->giveCoordinate(3) ); EASValsSetMType(CIRCLE_MARKER); go = CreateMarker3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:erisve，项目名称:oofem，代码行数:22，
示例24: drawScalarvoidTR_SHELL02 :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int i, indx, result = 0; WCRec p [ 3 ]; GraphicObj *tr; FloatArray v1, v2, v3; double s [ 3 ], defScale; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( !this->giveMaterial()->isActivated(tStep) ) { return; } if ( gc.giveIntVarMode() == ISM_recovered ) { result += this->giveInternalStateAtNode(v1, gc.giveIntVarType(), gc.giveIntVarMode(), 1, tStep); result += this->giveInternalStateAtNode(v2, gc.giveIntVarType(), gc.giveIntVarMode(), 2, tStep); result += this->giveInternalStateAtNode(v3, gc.giveIntVarType(), gc.giveIntVarMode(), 3, tStep); } else if ( gc.giveIntVarMode() == ISM_local ) { double tot_w = 0.; FloatArray a, v; for ( GaussPoint *gp: *plate->giveDefaultIntegrationRulePtr() ) { this->giveIPValue(a, gp, IST_ShellMomentumTensor, tStep); v.add(gp->giveWeight(), a); tot_w += gp->giveWeight(); } v.times(1. / tot_w); v1 = v; v2 = v; v3 = v; } indx = gc.giveIntVarIndx(); s [ 0 ] = v1.at(indx); s [ 1 ] = v2.at(indx); s [ 2 ] = v3.at(indx); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( gc.getScalarAlgo() == SA_ISO_SURF ) { for ( i = 0; i < 3; i++ ) { if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = gc.getDefScale(); p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale); } else { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3); } } // //EASValsSetColor(gc.getYieldPlotColor(ratio)); gc.updateFringeTableMinMax(s, 3); tr = CreateTriangleWD3D(p, s [ 0 ], s [ 1 ], s [ 2 ]); EGWithMaskChangeAttributes(LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); }}
开发者ID:rainbowlqs，项目名称:oofem，代码行数:61，
示例25: drawScalarvoidQuad10_2D_SUPG :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int i, indx, result = 0; WCRec p [ 3 ]; GraphicObj *tr; FloatArray v1, v2, v3; double s [ 3 ]; if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); // if ((gc.giveIntVarMode() == ISM_local) && (gc.giveIntVarType() == IST_VOFFraction)) { if ( ( gc.giveIntVarType() == IST_VOFFraction ) && ( gc.giveIntVarMode() == ISM_local ) ) { Polygon matvolpoly; //this->formMaterialVolumePoly(matvolpoly, NULL, temp_normal, temp_p, false); EASValsSetColor( gc.getStandardSparseProfileColor() ); //GraphicObj *go = matvolpoly.draw(gc,true,OOFEG_VARPLOT_PATTERN_LAYER); matvolpoly.draw(gc, true, OOFEG_VARPLOT_PATTERN_LAYER); return; } if ( gc.giveIntVarMode() == ISM_recovered ) { result += this->giveInternalStateAtNode(v1, gc.giveIntVarType(), gc.giveIntVarMode(), 1, tStep); result += this->giveInternalStateAtNode(v2, gc.giveIntVarType(), gc.giveIntVarMode(), 2, tStep); result += this->giveInternalStateAtNode(v3, gc.giveIntVarType(), gc.giveIntVarMode(), 3, tStep); } else if ( gc.giveIntVarMode() == ISM_local ) { GaussPoint *gp = integrationRulesArray [ 0 ]->getIntegrationPoint(0); result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep); v2 = v1; v3 = v1; result *= 3; } if ( result != 3 ) { return; } indx = gc.giveIntVarIndx(); s [ 0 ] = v1.at(indx); s [ 1 ] = v2.at(indx); s [ 2 ] = v3.at(indx); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( gc.getScalarAlgo() == SA_ISO_SURF ) { for ( i = 0; i < 3; i++ ) { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = 0.; } //EASValsSetColor(gc.getYieldPlotColor(ratio)); gc.updateFringeTableMinMax(s, 3); tr = CreateTriangleWD3D(p, s [ 0 ], s [ 1 ], s [ 2 ]); EGWithMaskChangeAttributes(LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); } else if ( ( gc.getScalarAlgo() == SA_ZPROFILE ) || ( gc.getScalarAlgo() == SA_COLORZPROFILE ) ) { double landScale = gc.getLandScale(); for ( i = 0; i < 3; i++ ) { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = s [ i ] * landScale; } if ( gc.getScalarAlgo() == SA_ZPROFILE ) { EASValsSetColor( gc.getDeformedElementColor() ); EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetFillStyle(FILL_SOLID); tr = CreateTriangle3D(p); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | FILL_MASK | LAYER_MASK, tr); } else { gc.updateFringeTableMinMax(s, 3); EASValsSetFillStyle(FILL_SOLID); tr = CreateTriangleWD3D(p, s [ 0 ], s [ 1 ], s [ 2 ]); EGWithMaskChangeAttributes(FILL_MASK | LAYER_MASK, tr); } EMAddGraphicsToModel(ESIModel(), tr); }}
开发者ID:rainbowlqs，项目名称:oofem，代码行数:86，
示例26: drawSpecialvoidLattice2d :: drawSpecial(oofegGraphicContext &gc, TimeStep *tStep){ WCRec l [ 2 ]; GraphicObj *tr; GaussPoint *gp; FloatArray crackStatuses, cf; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.giveIntVarType() == IST_CrackState ) { gp = integrationRulesArray [ 0 ]->getIntegrationPoint(0); this->giveIPValue(crackStatuses, gp, IST_CrackStatuses, tStep); if ( crackStatuses(0) == 1. || crackStatuses(0) == 2. || crackStatuses(0) == 3 || crackStatuses(0) == 4 ) { double x1, y1, x2, y2; x1 = this->giveNode(1)->giveCoordinate(1); y1 = this->giveNode(1)->giveCoordinate(2); x2 = this->giveNode(2)->giveCoordinate(1); y2 = this->giveNode(2)->giveCoordinate(2); //Compute normal and shear direction FloatArray normalDirection; FloatArray shearDirection; normalDirection.resize(2); normalDirection.zero(); shearDirection.resize(2); shearDirection.zero(); normalDirection.at(1) = x2 - x1; normalDirection.at(2) = y2 - y1; normalDirection.normalize(); if ( normalDirection.at(2) == 0. ) { shearDirection.at(1) = 0.; shearDirection.at(2) = 1.; } else { shearDirection.at(1) = 1.0; shearDirection.at(2) = -normalDirection.at(1) / normalDirection.at(2); } shearDirection.normalize(); l [ 0 ].x = ( FPNum ) this->gpCoords.at(1) - shearDirection.at(1) * this->width / 2.; l [ 0 ].y = ( FPNum ) this->gpCoords.at(2) - shearDirection.at(2) * this->width / 2.; l [ 0 ].z = 0.; l [ 1 ].x = ( FPNum ) this->gpCoords.at(1) + shearDirection.at(1) * this->width / 2.; ; l [ 1 ].y = ( FPNum ) this->gpCoords.at(2) + shearDirection.at(2) * this->width / 2.; l [ 1 ].z = 0.; EASValsSetLayer(OOFEG_CRACK_PATTERN_LAYER); EASValsSetLineWidth(OOFEG_CRACK_PATTERN_WIDTH); if ( ( crackStatuses(0) == 1. ) ) { EASValsSetColor( gc.getActiveCrackColor() ); } else if ( crackStatuses(0) == 2. ) { EASValsSetColor( gc.getCrackPatternColor() ); } else if ( crackStatuses(0) == 3. ) { EASValsSetColor( gc.getActiveCrackColor() ); } else if ( crackStatuses(0) == 4. ) { EASValsSetColor( gc.getActiveCrackColor() ); } tr = CreateLine3D(l); EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); } }}
开发者ID:vivianyw，项目名称:oofem，代码行数:70，
示例27: drawScalarvoidCohesiveSurface3d :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ if ( !gc.testElementGraphicActivity(this) ) { return; } FloatArray val; GaussPoint *gp = integrationRulesArray [ 0 ]->getIntegrationPoint(0); if ( !giveIPValue(val, gp, gc.giveIntVarType(), tStep) ) { return; } int indx = gc.giveIntVarIndx(); double s [ 8 ]; for ( int i = 0; i < 8; i++ ) { s [ i ] = val.at(indx); } gc.updateFringeTableMinMax(s, 1); WCRec p [ 8 ]; Particle *nodeA = ( Particle * ) giveNode(1); Particle *nodeB = ( Particle * ) giveNode(2); if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry double defScale = gc.getDefScale(); p [ 0 ].x = nodeA->giveUpdatedCoordinate(1, tStep, defScale); p [ 0 ].y = nodeA->giveUpdatedCoordinate(2, tStep, defScale); p [ 0 ].z = nodeA->giveUpdatedCoordinate(3, tStep, defScale); p [ 2 ].x = nodeB->giveUpdatedCoordinate(1, tStep, defScale); p [ 2 ].y = nodeB->giveUpdatedCoordinate(2, tStep, defScale); p [ 2 ].z = nodeB->giveUpdatedCoordinate(3, tStep, defScale); // handle special elements crossing the boundary of the periodic cell if ( giveNumberOfNodes() == 3 ) { Node *nodeC = ( Particle * ) giveNode(3); p [ 2 ].x += kxa + kxa * defScale * ( nodeC->giveDofWithID(D_u)->giveUnknown(VM_Total, tStep) ) + kyb * defScale * ( nodeC->giveDofWithID(R_u)->giveUnknown(VM_Total, tStep) ); p [ 2 ].y += kyb + kyb * defScale * ( nodeC->giveDofWithID(D_v)->giveUnknown(VM_Total, tStep) ) + kzc * defScale * ( nodeC->giveDofWithID(R_v)->giveUnknown(VM_Total, tStep) ); p [ 2 ].z += kzc + kzc * defScale * ( nodeC->giveDofWithID(D_w)->giveUnknown(VM_Total, tStep) ) + kxa * defScale * ( nodeC->giveDofWithID(R_w)->giveUnknown(VM_Total, tStep) ); } } else { // use initial geometry p [ 0 ].x = nodeA->giveCoordinate(1); p [ 0 ].y = nodeA->giveCoordinate(2); p [ 0 ].z = nodeA->giveCoordinate(3); p [ 2 ].x = nodeB->giveCoordinate(1); p [ 2 ].y = nodeB->giveCoordinate(2); p [ 2 ].z = nodeB->giveCoordinate(3); // handle special elements crossing the boundary of the periodic cell if ( giveNumberOfNodes() == 3 ) { p [ 2 ].x += kxa; p [ 2 ].y += kyb; p [ 2 ].z += kzc; } } double r1 = nodeA->giveRadius(); double r2 = nodeB->giveRadius(); double d = 0.1 * ( r1 + r2 ); p [ 1 ].x = 0.5 * ( p [ 0 ].x + p [ 2 ].x - d * lcs.at(2, 1) - d * lcs.at(3, 1) ); p [ 1 ].y = 0.5 * ( p [ 0 ].y + p [ 2 ].y - d * lcs.at(2, 2) - d * lcs.at(3, 2) ); p [ 1 ].z = 0.5 * ( p [ 0 ].z + p [ 2 ].z - d * lcs.at(2, 3) - d * lcs.at(3, 3) ); p [ 3 ].x = p [ 1 ].x + d *lcs.at(2, 1); p [ 3 ].y = p [ 1 ].y + d *lcs.at(2, 2); p [ 3 ].z = p [ 1 ].z + d *lcs.at(2, 3); for ( int i = 5; i < 8; i += 2 ) { p [ i ].x = p [ i - 4 ].x + d *lcs.at(3, 1); p [ i ].y = p [ i - 4 ].y + d *lcs.at(3, 2); p [ i ].z = p [ i - 4 ].z + d *lcs.at(3, 3); } p [ 4 ] = p [ 0 ]; p [ 6 ] = p [ 2 ]; GraphicObj *go = CreateHexahedronWD(p, s); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); EASValsSetLineWidth(2 * OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetFillStyle(FILL_SOLID); //EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go); EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | LAYER_MASK, go); EMAddGraphicsToModel(ESIModel(), go);}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:87，
示例28: drawScalarvoid L4Axisymm :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int i, indx, result = 0; WCRec p [ 4 ]; GraphicObj *tr; FloatArray v [ 4 ]; double s [ 4 ], defScale; if ( !gc.testElementGraphicActivity(this) ) { return; } EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( gc.giveIntVarMode() == ISM_recovered ) { for ( i = 1; i <= 4; i++ ) { result += this->giveInternalStateAtNode(v [ i - 1 ], gc.giveIntVarType(), gc.giveIntVarMode(), i, tStep); } if ( result != 4 ) { return; } indx = gc.giveIntVarIndx(); for ( i = 1; i <= 4; i++ ) { s [ i - 1 ] = v [ i - 1 ].at(indx); } if ( gc.getScalarAlgo() == SA_ISO_SURF ) { for ( i = 0; i < 4; i++ ) { if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = gc.getDefScale(); p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale); p [ i ].z = 0.; } else { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); p [ i ].z = 0.; } } //EASValsSetColor(gc.getYieldPlotColor(ratio)); gc.updateFringeTableMinMax(s, 4); tr = CreateQuadWD3D(p, s [ 0 ], s [ 1 ], s [ 2 ], s [ 3 ]); EGWithMaskChangeAttributes(LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); /* * } else if (gc.getScalarAlgo() == SA_ISO_LINE) { * * EASValsSetColor(context.getActiveCrackColor()); * EASValsSetLineWidth(OOFEG_ISO_LINE_WIDTH); * * for (i=0; i< 4; i++) { * if (gc.getInternalVarsDefGeoFlag()) { * // use deformed geometry * defScale = gc.getDefScale(); * p[i].x = (FPNum) this->giveNode(i+1)->giveUpdatedCoordinate(1,tStep,defScale); * p[i].y = (FPNum) this->giveNode(i+1)->giveUpdatedCoordinate(2,tStep,defScale); * p[i].z = 0.; * * } else { * p[i].x = (FPNum) this->giveNode(i+1)->giveCoordinate(1); * p[i].y = (FPNum) this->giveNode(i+1)->giveCoordinate(2); * p[i].z = 0.; * } * } * * // isoline implementation * oofeg_drawIsoLinesOnQuad (p, s); * */ } } else if ( gc.giveIntVarMode() == ISM_local ) { if ( numberOfGaussPoints != 4 ) { return; } IntArray ind(4); FloatArray *gpCoords; WCRec pp [ 9 ]; for ( i = 0; i < 4; i++ ) { if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = gc.getDefScale(); pp [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); pp [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale); pp [ i ].z = 0.; } else { pp [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); pp [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2); pp [ i ].z = 0.; } } for ( i = 0; i < 3; i++ ) { pp [ i + 4 ].x = 0.5 * ( pp [ i ].x + pp [ i + 1 ].x );//.........这里部分代码省略.........
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:101，
示例29: drawScalarvoid Truss1d :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep){ int i, indx, result = 0; WCRec p [ 2 ]; GraphicObj *tr; FloatArray v1, v2; double s [ 2 ], defScale; if ( !gc.testElementGraphicActivity(this) ) { return; } if ( gc.giveIntVarMode() == ISM_recovered ) { result += this->giveInternalStateAtNode(v1, gc.giveIntVarType(), gc.giveIntVarMode(), 1, tStep); result += this->giveInternalStateAtNode(v2, gc.giveIntVarType(), gc.giveIntVarMode(), 2, tStep); } else if ( gc.giveIntVarMode() == ISM_local ) { GaussPoint *gp = integrationRulesArray [ 0 ]->getIntegrationPoint(0); result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep); v2 = v1; result *= 2; } if ( result != 2 ) { return; } indx = gc.giveIntVarIndx(); s [ 0 ] = v1.at(indx); s [ 1 ] = v2.at(indx); EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( ( gc.getScalarAlgo() == SA_ISO_SURF ) || ( gc.getScalarAlgo() == SA_ISO_LINE ) ) { for ( i = 0; i < 2; i++ ) { if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = gc.getDefScale(); p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); p [ i ].y = 0.; p [ i ].z = 0.; } else { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = 0.; p [ i ].z = 0.; } } //EASValsSetColor(gc.getYieldPlotColor(ratio)); tr = CreateLine3D(p); EGWithMaskChangeAttributes(LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); } else if ( ( gc.getScalarAlgo() == SA_ZPROFILE ) || ( gc.getScalarAlgo() == SA_COLORZPROFILE ) ) { double landScale = gc.getLandScale(); for ( i = 0; i < 2; i++ ) { if ( gc.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = gc.getDefScale(); p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale); p [ i ].y = 0.0; p [ i ].z = s [ i ] * landScale; } else { p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1); p [ i ].y = 0.0; p [ i ].z = s [ i ] * landScale; } } if ( gc.getScalarAlgo() == SA_ZPROFILE ) { /* * EASValsSetColor(gc.getDeformedElementColor()); * EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); * tr = CreateLine3D(p); * EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, tr); */ WCRec pp [ 4 ]; pp [ 0 ].x = p [ 0 ].x; pp [ 0 ].y = 0.0; pp [ 0 ].z = 0.0; pp [ 1 ].x = p [ 0 ].x; pp [ 1 ].y = 0.0; pp [ 1 ].z = p [ 0 ].z; pp [ 2 ].x = p [ 1 ].x; pp [ 2 ].y = 0.0; pp [ 2 ].z = p [ 1 ].z; pp [ 3 ].x = p [ 1 ].x; pp [ 3 ].y = 0.0; pp [ 3 ].z = 0.0; tr = CreateQuad3D(pp); EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH); EASValsSetColor( gc.getDeformedElementColor() ); //EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER); EASValsSetFillStyle(FILL_HOLLOW); EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); } else { //tr = CreateTriangleWD3D(p, s[0], s[1], s[2]); EASValsSetColor( gc.getDeformedElementColor() ); tr = CreateLine3D(p);//.........这里部分代码省略.........
开发者ID:aishugang，项目名称:oofem，代码行数:101，
示例30: drawScalarvoid QTrPlaneStrain :: drawScalar(oofegGraphicContext &context){ int t, n [ 3 ], i, indx, result = 0; WCRec p [ 3 ]; GraphicObj *tr; TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep(); FloatArray v [ 6 ]; double s [ 6 ], ss [ 3 ], defScale; IntArray map; if ( !context.testElementGraphicActivity(this) ) { return; } if ( context.giveIntVarMode() == ISM_recovered ) { for ( i = 1; i <= 6; i++ ) { result += this->giveInternalStateAtNode(v [ i - 1 ], context.giveIntVarType(), context.giveIntVarMode(), i, tStep); } } else if ( context.giveIntVarMode() == ISM_local ) { return; } if ( result != 6 ) { return; } result = this->giveIntVarCompFullIndx( map, context.giveIntVarType() ); if ( ( !result ) || ( indx = map.at( context.giveIntVarIndx() ) ) == 0 ) { return; } for ( i = 1; i <= 6; i++ ) { s [ i - 1 ] = v [ i - 1 ].at(indx); } EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER); if ( context.getScalarAlgo() == SA_ISO_SURF ) { for ( t = 1; t <= 4; t++ ) { if ( t == 1 ) { n [ 0 ] = 1; n [ 1 ] = 4; n [ 2 ] = 6; } else if ( t == 2 ) { n [ 0 ] = 2; n [ 1 ] = 5; n [ 2 ] = 4; } else if ( t == 3 ) { n [ 0 ] = 3; n [ 1 ] = 6; n [ 2 ] = 5; } else { n [ 0 ] = 4; n [ 1 ] = 5; n [ 2 ] = 6; } for ( i = 0; i < 3; i++ ) { if ( context.getInternalVarsDefGeoFlag() ) { // use deformed geometry defScale = context.getDefScale(); p [ i ].x = ( FPNum ) this->giveNode(n [ i ])->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale); p [ i ].y = ( FPNum ) this->giveNode(n [ i ])->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale); p [ i ].z = 0.; } else { p [ i ].x = ( FPNum ) this->giveNode(n [ i ])->giveCoordinate(1); p [ i ].y = ( FPNum ) this->giveNode(n [ i ])->giveCoordinate(2); p [ i ].z = 0.; } } //EASValsSetColor(gc.getYieldPlotColor(ratio)); ss [ 0 ] = s [ n [ 0 ] - 1 ]; ss [ 1 ] = s [ n [ 1 ] - 1 ]; ss [ 2 ] = s [ n [ 2 ] - 1 ]; context.updateFringeTableMinMax(ss, 3); tr = CreateTriangleWD3D(p, ss [ 0 ], ss [ 1 ], ss [ 2 ]); EGWithMaskChangeAttributes(LAYER_MASK, tr); EMAddGraphicsToModel(ESIModel(), tr); } /* } else if (context.getScalarAlgo() == SA_ISO_LINE) { * * EASValsSetColor(context.getActiveCrackColor()); * EASValsSetLineWidth(OOFEG_ISO_LINE_WIDTH); * * for (t=1; t<=4; t++) { * if (t==1) {n[0] = 1; n[1]=4; n[2]=6;} * else if (t==2) {n[0]=2; n[1]=5; n[2]=4;} * else if (t==3) {n[0]=3; n[1]=6; n[2]=5;} * else {n[0]=4; n[1]=5; n[2]=6;} * * * for (i=0; i< 3; i++) { * if (context.getInternalVarsDefGeoFlag()) { * // use deformed geometry * defScale = context.getDefScale(); * p[i].x = (FPNum) this->giveNode(n[i])->giveUpdatedCoordinate(1,tStep,EID_MomentumBalance,defScale); * p[i].y = (FPNum) this->giveNode(n[i])->giveUpdatedCoordinate(2,tStep,EID_MomentumBalance,defScale);//.........这里部分代码省略.........
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:101，
注：本文中的EASValsSetLayer函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ EASValsSetLineWidth函数代码示例
C++ EASValsSetColor函数代码示例 |
