自学教程：C++ EA_vCls函数代码示例

void   TmsMenu(void){#ifdef TMS 	uint uiRet;	while(1)	{		PubDisplayCen(0  , "TMS分发");		PubDisplay(1 , "1.签到    2.通讯设置");		PubDisplay(2 , "3.新装机密钥分发");		PubDisplay(3 , "4.重置密钥5.密钥加载");		PubDisplay(4 , "6.离线分发");		uiRet = PubuiInkey(60);		PubDisplayCen(0 , "         ");//清屏		switch(uiRet)		{		case EM_key_NOHIT:		case EM_key_CANCEL:			EA_vCls();			return;		case EM_key_1:			EI_tms_ucKeyposLogin(&EG_TMSHead,&FV.EG_TMSstru);			break;		case EM_key_2:			PubTMSSet(&EG_TMSHead,&FV.EG_TMSstru);			break;		case EM_key_3:			EI_tms_ucPosDownKey(&EG_TMSHead,&FV.EG_TMSstru);			break;		case EM_key_4:			EI_tms_ucPosResetKey(&EG_TMSHead,&FV.EG_TMSstru);			break;		case EM_key_5:			EI_tms_ucPosLoadKey(&EG_TMSHead,&FV.EG_TMSstru);			break;		case EM_key_6:			TMKDeliveTMS();			break;		case EM_key_FUNC5:			if (PubuiInkey(5) == EM_key_FUNC6)			{				gbDebugFlag = 1;				EA_vCls();				PubDisplay(2 , "设置debug成功");				PubuiInkey(5);			}			break;		default:			break;		}	}	return;#else	EA_vCls();	PubDisplay(1 , "目前不支持TMS分发");	PubuiInkey(60);	return;#endif}

/** 函数功能：查看柜员* 入口参数：无* 出口参数：无* 返 回 值：无*/int ProQueryOper(void){    int nCount;    uchar nNum;	    EA_vCls();    nNum = 1;    for (nCount = 0; nCount < FV.gbnOperCnt; nCount++)    {        if (nNum > 6)        {            nNum = 1;            PubuiInkey(TIPS_TIMEOUT);            EA_vCls();        }		        if (nCount + 1 < FV.gbnOperCnt) {            PubDisplays(nNum, 1, "%d.[%s]  %d.[%s]", 				nCount, FV.gbStruOperSeq[nCount].szOperNo,				nCount + 1, FV.gbStruOperSeq[nCount + 1].szOperNo);        }        else { // 奇数个，最后一排只显示一个            PubDisplays(nNum, 1, "%d.[%s]", nCount, FV.gbStruOperSeq[nCount].szOperNo);        }        nCount++;                                      nNum++;    }    PubuiInkey(TIPS_TIMEOUT);    return NORMAL;}

/* * 函数功能：读取卡组织代码 * 入口参数：无 * 出口参数：无 * 返 回 值：NORMAL－－成功 *           EXCEPTION－－失败 */int ProReadCardId(void){    uint uiRet;	if(strlen(TlvSendValue.szCreditCompany)>0)	{		memcpy(szCardId,TlvSendValue.szCreditCompany,3);		return NORMAL;	}	else	{	    EA_vCls();		PubDisplay(0, "      离线结算");	    PubDisplayInv(1, "选择国际公司代码:");	    PubDisplays(3, 1, "1.CUP      2.VIS");	    PubDisplays(4, 1, "3.MCC      4.MAE");	    PubDisplays(5, 1, "5.JCB      6.DCC");	    PubDisplays(6, 1, "7.AEX");	    while (1)	    {	        uiRet = PubuiInkey(60);	        if (uiRet == EM_key_CANCEL)			{				PubDisplay(0, "                ");	            return EXCEPTION;			}	        if ((uiRet > '0' && uiRet < '8') || uiRet == EM_key_ENTER)	            break;	    }		EA_vCls();		PubDisplay(0, "                ");//第0行必须用空格才能清屏	    switch (uiRet)	    {	    case '1':	    case EM_key_ENTER:	        strcpy(szCardId, "CUP");	        return NORMAL;	    case '2':	        strcpy(szCardId, "VIS");	        return NORMAL;	    case '3':	        strcpy(szCardId, "MCC");	        return NORMAL;	    case '4':	        strcpy(szCardId, "MAE");	        return NORMAL;	    case '5':	        strcpy(szCardId, "JCB");	        return NORMAL;	    case '6':	        strcpy(szCardId, "DCC");	        return NORMAL;	    case '7':	        strcpy(szCardId, "AEX");	        return NORMAL;	    default:	        return EXCEPTION;	    }	}}

/***************************************************************** 函数原型：System_Init() 功能描述：参数等初始化 参数描述： 返回值：   OK ?  NOTOK 作  者：   许岩/刘及华 日  期：   2012-11-24 修改历史：		日期        修改人      修改描述		------      ---------   -------------*****************************************************************/INT8U System_Init(void){	INT8U   i = 0;	INT16U  key = EM_key_NOHIT;	EA_vCls();	EA_ucSetInverse(EM_lcd_INVOFF);	EA_vDisp(1, 1, "    版本号: ");	EA_vDisp(1, 13, VERSION);	SleepMs(2000);	EA_vCls();	EA_vDisp(2, 1, "   系统初始化中...  ");	key = EA_uiInkeyMs(2000);	if ( key == EM_key_F3 )	{		format_process();    		  //可以进行系统格式化操作	}	//重要参数部分初始化函数	appfile_Init();	memset((void *)&DevStat, 0x00, sizeof(DevStat));	i = ReadParam();  	        	if ( i != ok )	{		param_factory_default(0);     //格式化重要参数DEV.STATE	}	DevStat.POS_type = POS_T_NORMAL;  //盒类型为正常采集	DevStat.record_number = query_rec_num();	memset((void *)&CardInfo, 0x00, sizeof(CardInfo));        //清除卡的信息	memset((void *)&ErrCardInfo, 0x00, sizeof(ErrCardInfo));  //清除错误卡的信息	//这里应该添加一个函数，负责管理所有的设备的句柄结构!!!!	i = Device_Handle_Init();	if( i != ok)	{		return notok;	}	if( LowBatteryDisplay() != ok )     //电池电量检测	{			lcddisperr("电池电量检测失败");		return notok;	}	if( SystemCheck() != ok )          //PSAM系统检测	{		lcddisperr("PSAM卡检测失败");		return notok;	}	return ok;}

/****************************************************************************** 函数名称：TimeModify 功能描述：要求输入时间，进行修改 参数描述： 参数名称：	输入/输出？	类型		描述				 返  回  值：无				    作      者	：许岩 日      期：2004-09-02 修改历史：		日期		修改人		修改描述		------		---------	-------------******************************************************************************/void TimeModify(void){	INT8U i = 0;	INT8U input[50];	INT8U buf[50];	BUS_TIME ltime;	for (;;)	{		EA_vCls();		Get_Time(&ltime);		EA_vDisp(1, 1, "当前时间:");		sprintf((void *)buf, "%02X%02X-%02X-%02X-%02X:%02X:%02X", ltime.century, ltime.year, ltime.month,				ltime.day, ltime.hour, ltime.minute, ltime.second);		EA_vDisp(2, 1, (void *)buf);		EA_vDisp(3, 1, "请输入新的时间:");		(void)EA_ucClrKeyBuf();		strcpy((void *)input, "");		i = EA_ucGetInputStr(4, 1, 20, EM_BIG_FONT | EM_MODE_NUMBER | EM_ALIGN_LEFT | EM_SHOW_ORIGINALLY							 , 14, 14, 0, (void *)input);		//  	sprintf(dbuf, "%s", input);		//  	EA_vDisp(3, 1, dbuf);		//  	sprintf(dbuf, "result:%02X", i);		//  	EA_vDisp(4, 1, dbuf);		if ( i == EM_ABOLISH )			return;		if ( i != EM_SUCCESS )			continue;		ltime.century = (ascii_to_hex(input[0]) << 4) | ascii_to_hex(input[1]);		ltime.year = (ascii_to_hex(input[2]) << 4) | ascii_to_hex(input[3]);		ltime.month = (ascii_to_hex(input[4]) << 4) | ascii_to_hex(input[5]);		ltime.day = (ascii_to_hex(input[6]) << 4) | ascii_to_hex(input[7]);		ltime.hour = (ascii_to_hex(input[8]) << 4) | ascii_to_hex(input[9]);		ltime.minute = (ascii_to_hex(input[10]) << 4) | ascii_to_hex(input[11]);		ltime.second = (ascii_to_hex(input[12]) << 4) | ascii_to_hex(input[13]);		i = CheckTimeFormat(&ltime);		if ( i != ok )		{			EA_vCls();			EA_vDisp(4, 1, "时间格式错误");			SleepMs(1500);			//  		EA_vCls();			continue;		}		Modify_Time(&ltime);		EA_vCls();		EA_vDisp(4, 1, "时间修改成功");		SleepMs(1500);		break;	}}

/* * 函数功能：读取卡组织代码 * 入口参数：无 * 出口参数：无 * 返 回 值：NORMAL－－成功 *           EXCEPTION－－失败 */int ProReadCardId(void){    uint uiRet;    EA_vCls();	PubDisplay(0, "      离线结算");    PubDisplayInv(1, "选择国际公司代码:");    PubDisplays(3, 1, "1.CUP      2.VIS");    PubDisplays(4, 1, "3.MCC      4.MAE");    PubDisplays(5, 1, "5.JCB      6.DCC");    PubDisplays(6, 1, "7.AMX");            //AEX ->AMX modify by chenjis 20120719    while (1)    {        uiRet = PubuiInkey(60);        if (uiRet == EM_key_CANCEL || uiRet == EM_key_NOHIT)		{			PubClearIcon();			EA_vCls();            return EXCEPTION;		}        if ((uiRet > '0' && uiRet < '8') || uiRet == EM_key_ENTER)            break;    }	EA_vCls();	PubClearIcon();    switch (uiRet)    {    case '1':    case EM_key_ENTER:        strcpy(szCardId, "CUP");        return NORMAL;    case '2':        strcpy(szCardId, "VIS");        return NORMAL;    case '3':        strcpy(szCardId, "MCC");        return NORMAL;    case '4':        strcpy(szCardId, "MAE");        return NORMAL;    case '5':        strcpy(szCardId, "JCB");        return NORMAL;    case '6':        strcpy(szCardId, "DCC");        return NORMAL;    case '7':        strcpy(szCardId, "AMX");     //AEX ->AMX modify by chenjis 20120719        return NORMAL;    default:        return EXCEPTION;    }}

int	PubICReadCard(char* pszOut, int *pLen){	unsigned char ucRecBuf[256];	unsigned int uiRetLen;	unsigned char CFlagGetKey;		EA_vCls();		CFlagGetKey = NO;	EA_vCls();	if ( PubOpenUserICCardDev () != NORMAL )		return EXCEPTION;	PubDisplayInv(1, "联名卡");	PubDisplayCen(2, "请插入IC卡");	PubDisplayCen(3, "按<取消>退出");    while(1)    {      	if ( PubUserICCardIn() == NORMAL )       		break;       	if (EA_ucKBHit () == EM_key_HIT)		{			if (PubuiInkey (1) == CANCEL) 			{				return EXCEPTION;			}		}    }	if ( PubUserICCardPowerUp() != NORMAL )		return EXCEPTION;	if ( ProICCComm1 ("MF选择",CPU_CARD, 0x00, 0xa4, 0x00, 0x00, 0x02, "/x3f/x00",					0x00, ucRecBuf, &uiRetLen) != NORMAL )		return EXCEPTION;	if ( ProICCComm1 ("EF05选择",CPU_CARD, 0x00, 0xa4, 0x00, 0x00, 0x02, "/xEF/x05",		0x00, ucRecBuf, &uiRetLen) != NORMAL )		return EXCEPTION;	if ( ProICCComm1 ("读文件选择",CPU_CARD, 0x00, 0xB0, 0x00, 0x00, 0x00, "",		0x00, ucRecBuf, &uiRetLen) != NORMAL )		return EXCEPTION;	EA_ucCloseDevice (&gbhdlUserCard);	memcpy(pszOut, ucRecBuf, uiRetLen);	*pLen = uiRetLen;	EA_ucCloseDevice (&gbhdlUserCard);	return NORMAL;}

void SetComNumber(void){    uint uiRet ;	int nComNumber , nComHostNumber;	nComNumber = FV.gbnComNumber;	nComHostNumber = FV.gbnComHostNumber;	while(1)	{		EA_vCls();		PubDisplay(0 , "                      ");		PubDisplayInv( 1 , "设置接收密钥端口号");		PubDisplay( 2 , "输入端口号(0-9):%d", nComHostNumber);		PubDisplay( 3 , "提示:8-USBH 9-USBD");		PubDisplay( 4 , "0-设置为默认端口");		uiRet = PubuiInkey(0);		if (uiRet>='0' && uiRet<='9')			nComHostNumber = uiRet - '0';		EA_vCls();		PubDisplay(0 , "                      ");		PubDisplayInv( 1 , "设置下载密钥端口号");		PubDisplay( 2 , "输入端口号(0-9):%d", nComNumber);		PubDisplay( 3 , "提示:8-USBH 9-USBD");		PubDisplay( 4 , "0-设置为默认端口");		uiRet = PubuiInkey(0);		if (uiRet>='0' && uiRet<='9')			nComNumber = uiRet - '0';		if (nComNumber == 0 &&nComHostNumber == 0)		{			SetE5DefaultPort();			return;		}		if (nComHostNumber == nComNumber)		{			EA_vCls();			PubDisplay(1 , "接收和下载密钥使用");			PubDisplay(2 , "相同的端口,联机分发");			PubDisplay(3 , "时候要拔插串口");			PubDisplay(4 , "按1键确认 其他键重设");			if (PubuiInkey(10) != '1')					continue;		}		FV.gbnComNumber = nComNumber;		PubWriteMemFile(&FV.gbnComNumber, sizeof(FV.gbnComNumber));		FV.gbnComHostNumber = nComHostNumber;		PubWriteMemFile(&FV.gbnComHostNumber, sizeof(FV.gbnComHostNumber));		break;	}	return ;}

/*********************************************************************** 函数名称:** 功能描述:** 输入参数:     arc     － 无意义*               argv    － 无意义* 输出参数:** 返回值:** 历史纪录*   修改人          日期            版本号          修改内容*   洪晓辉          2004-01-21      1.00            创建***********************************************************************/int dlm_main(void){int nTransType;uint uiRet;	PubDispHeadTitle( );	PubInitData();	PubInitGlobal( );	PubAbout(  );		PubCheckTerminal( );	while(1)	{		PubDispHeadTitle( );		if( FV.gbstCfg.nPosState == POSLOGOUT) //增加取消键切换应用		{			EA_vCls();			PubDisplayInv(1,"储值卡");			PubDisplayCen(3,"按任意键签到");			PubDisplayCen(4,"按取消键切换应用");			uiRet = PubuiInkey(10);			if (uiRet == EM_key_FUNC9|| uiRet == EM_key_CANCEL)			{				EA_vCls();//				PubClearIcon();// //清图标行                PubDisplayCen(2, "应用切换");                PubuiInkeyMs(500);//                 PubDelAllBit(&iso);// 				close_all_dev();				EA_vCls();                return EM_ERROR;			}				}		if( PubBeForeTrans() != NORMAL )			continue;						memset( (char *)&gbstTrackInfo, 0x00, sizeof(ST_TRACK));		nTransType = PubProcMenu(FV.gbstMenuRes, (char *)"德基广场", 120);		//  [4/23/2013 zyf] 取消键切换应用		if ( nTransType == EM_key_CANCEL)			return EM_ERROR;		PubTransProcess( nTransType );	}}

void ProDisdoterColor(void){	char szBuffer[100];	uint  nLen;	BUFCLR(szBuffer);	PubGetPosTypeName(szBuffer);	nLen = 21 - 8 - strlen(szBuffer);	EA_vCls();	if (strlen(gbPosTags))// 有广告	{		if(PubDispJpg(5, 45, EM_BMP_ROTATE0,EM_BMP_NOT_TRANSPARENCE,"银联LOGO.jpg")!=EM_SUCCESS)		{			EA_vDrawBitmap(1, 48, EM_BMP_ROTATE0, EM_BMP_NOT_TRANSPARENCE, dispstr);		}		EA_vTextOut(185, 50, EM_key_FONT12X24, 0, 1, 1, "苏州银行");		EA_vTextOut(170, 90, EM_key_FONT12X24, 0, 1, 1, "请刷卡/插卡");		EA_vTextOut(170, 130, EM_key_FONT12X24, 0, 1, 1, "%s%s", szBuffer,FV.Other.gbszVerNoYS);	}	else	{		if(PubDispJpg(15, 68, EM_BMP_ROTATE0,EM_BMP_NOT_TRANSPARENCE,"银联LOGO.jpg")!=EM_SUCCESS)		{			EA_vDrawBitmap(1, 48, EM_BMP_ROTATE0, EM_BMP_NOT_TRANSPARENCE, dispstr);		}		EA_vTextOut(195, 80, EM_key_FONT12X24, 0, 1, 1, "苏州银行");		EA_vTextOut(178, 120, EM_key_FONT12X24, 0, 1, 1, "请刷卡/插卡");		EA_vTextOut(178, 180, EM_key_FONT12X24, 0, 1, 1, "%s%s", szBuffer,FV.Other.gbszVerNoYS);	}    return;}

void ProDisdoterNormal(void){	char szBuffer[100];	uint  nLen;	BUFCLR(szBuffer);	PubGetPosTypeName(szBuffer);	nLen = 21 - 8 - strlen(szBuffer);	EA_vCls();	if (strlen(gbPosTags))// 有广告	{		PubClearIcon();// //清图标行		EA_vDrawBitmap(1, 2, EM_BMP_ROTATE0, EM_BMP_NOT_TRANSPARENCE, dispstr);		EA_vTextOut(70, 4, EM_key_FONT6X12, 0, 1, 1, "苏州银行");		EA_vTextOut(60, 18, EM_key_FONT6X12, 0, 1, 1, "请刷卡/插卡");		PubDisps(3 ,nLen+1, "%s%s",szBuffer , FV.Other.gbszVerNoYS);	}	else	{		EA_vDrawBitmap(1, 13, EM_BMP_ROTATE0, EM_BMP_NOT_TRANSPARENCE, dispstr);		PubDisp(1 , 13 , "苏州银行");		EA_vTextOut(60, 34, EM_key_FONT6X12, 0, 1, 1, "请刷卡/插卡");		PubDisps(5 ,nLen+1, "%s%s",szBuffer , FV.Other.gbszVerNoYS);	}    return;}

// *****************************************************************// 功能：		AnalyAndDisplayNote// 说明:		查询日结表，并显示日结信息// 入口参数：	// 出口参数：	Null// 作者：// 返回值：							// *****************************************************************void AnalyAndDisplayNote(INT8U * strTradeInfo){	INT8U	time[7+2]; 	char    strbuff[30];	INT8U   temp[30];//	float   fBuf = 0;//	INT8U   LOCAL_V_TYPE  temp_buf[100];	_BANLANCE_IN_HAND * prec = (_BANLANCE_IN_HAND *)strTradeInfo;	EA_vCls();	sprintf(strbuff, "加油次数:%7d次", prec->consume_cnt);	EA_vDisplay(1, strbuff);//消费金额	sprintf(strbuff, "加油体积:%6.2f元", (float)(prec->consume_amt)/100);	EA_vDisplay(2, strbuff);//上班时间		memcpy(time, (INT8U*)&prec->work_datetime,7);	htoa(temp, time, 7);	sprintf(strbuff, "上班：%s", temp);	EA_vDisplay(3, strbuff);	//下班时间	memcpy(time, (INT8U*)&prec->down_datetime,7);	htoa(temp, time, 7);	sprintf(strbuff, "下班：%s",temp);	EA_vDisplay(4, strbuff);}

// *****************************************************************// 功能：		AnalyAndDisplayNote// 说明:		查询日结表，并显示日结信息// 入口参数：	// 出口参数：	Null// 作者：// 返回值：							// *****************************************************************void AnalyAndDisplayNote(INT8U * strTradeInfo){	INT8U	time[7+2]; 	char    strbuff[30];	INT8U   temp[30];	_BANLANCE_IN_HAND * prec = (_BANLANCE_IN_HAND *)strTradeInfo;	EA_vCls();	sprintf(strbuff, "加油次数:%7d次", (prec->consume_cnt[0]+prec->consume_cnt[1]+prec->consume_cnt[2]+prec->consume_cnt[3]));	EA_vDisplay(1, strbuff);//消费金额	sprintf(strbuff, "加油金额:%6.2lf元", (double)(prec->consume_amt[0]+prec->consume_amt[1]+prec->consume_amt[2]+prec->consume_amt[3])/100.0);	EA_vDisplay(2, strbuff);//上班时间		memcpy(time, (INT8U*)&prec->work_datetime, 6);	htoa(temp, time, 6);	sprintf(strbuff, "上班时间:%s", temp);	EA_vDisplay(4, strbuff);	//操作员	memcpy(strbuff, (INT8U*)&prec->oper_id, 3);	htoa((void *)temp, (void *)strbuff, 3);	sprintf(strbuff, "加 油 员:%s",temp);	EA_vDisplay(3, strbuff);}

int ProFuncOthergbnSKFlag(void *p1, void *p2){    int iOption;	uint uiKey;		iOption = FV.Other.gbnSKFlag;		EA_vCls();	PubDisplay(1 , "设置闪卡功能[%d]", iOption);	PubDisplay(2 , "0 不支持闪卡");	PubDisplay(3 , "1 支持闪卡");	uiKey = PubuiInkey(120);	switch(uiKey)	{	case EM_key_CANCEL:	case EM_key_NOHIT:		return CANCELED;	case EM_key_F1:	case EM_key_FEED:		return BACK;	case '1':		FV.Other.gbnSKFlag = 1;		PubWriteMemFile(&FV.Other.gbnSKFlag,sizeof(FV.Other.gbnSKFlag));		break;	case '0':		FV.Other.gbnSKFlag = 0;		PubWriteMemFile(&FV.Other.gbnSKFlag,sizeof(FV.Other.gbnSKFlag));		break;	default :		break;	}	return NORMAL;}

int SetS100LoadKeyMode(void){	uchar aucOut[20], ucRet;	DevHandle hDevHandle;	uint uiOutLen;	int  nReturn;		nReturn = 0;	ucRet = EA_ucOpenDevice("COM", EM_io_PORT2, &hDevHandle);    if ( ucRet != EM_SUCCESS)    {		EA_vCls();        PubDisplay(2,"打开端口错误 %d", ucRet);        PubuiInkey(30);		return -1;    }	EA_ucInitRS232(hDevHandle, EM_232_115200BPS, EM_232_NOPAR, EM_232_8DBS);	EA_ucClearRS232(hDevHandle);//清除缓冲区	    memcpy(aucOut,"/x02/x06/x9a/x01/x00/x00/x03/x02",8);    ucRet = EA_ucWriteDevice(hDevHandle, 8, 1, (char*)aucOut);	    memset(aucOut, 0x00, 8);    memcpy(aucOut+8,"/x06/x02/x04/x00/x01/x03/x02",7);    	uiOutLen = 0;    ucRet = EA_ucReadDevice(hDevHandle, 7, 3, aucOut, &uiOutLen);    if ( ucRet != EM_SUCCESS|| uiOutLen != 7)    {		EA_vCls();        PubDisplay(2,"从端口读数据错 %d %d", ucRet, uiOutLen);        PubuiInkey(30);		nReturn = -2;    }    else    {        if(memcmp(aucOut+8, aucOut, 7))        {			EA_vCls();			PubDisplay(2,"数据校验错误");			PubuiInkey(30);			nReturn = -3;        }    }	EA_ucCloseDevice(&hDevHandle);	return nReturn;}

void ProDispQuickColor(void){	EA_vCls();	if(PubDispJpg(1, 45, EM_BMP_ROTATE0,EM_BMP_NOT_TRANSPARENCE,"闪付LOGO.jpg")!=EM_SUCCESS)	{		EA_vDrawBitmap(1, 40, EM_BMP_ROTATE0, EM_BMP_NOT_TRANSPARENCE, dispstrQuick);	}    return;}

int ProFuncOthergbcSignLcdMode(void *p1,void *p2){    // modify by chenjis 20121024#ifndef EPT56X0#ifndef EPT5610    char cOption;    uint uiKey;    if(FV.Other.gbcSignLcdMode == EM_FACE_MODE1)        cOption = 1;    else if(FV.Other.gbcSignLcdMode == EM_FACE_MODE0)        cOption = 2;    else if(FV.Other.gbcSignLcdMode == EM_FACE_MODE3)        cOption = 3;    else if(FV.Other.gbcSignLcdMode == EM_FACE_MODE4)        cOption = 4;    else        cOption = 0;    EA_vCls();    PubDisplay(1 , "选择屏类型(%d)", cOption);    PubDisplay(2 , "1 3.5横  2 3.5竖");    PubDisplay(3 , "3 128x64 4 320x240");    //PubDisplay(4 , "");    uiKey = PubuiInkey(120);    switch(uiKey)    {    case EM_key_CANCEL:    case EM_key_NOHIT:        return CANCELED;    case EM_key_F1:    case EM_key_FEED:        return BACK;    case '1':        FV.Other.gbcSignLcdMode = EM_FACE_MODE1;        WRITE_nVAR(FV.Other.gbcSignLcdMode);        break;    case '2':        FV.Other.gbcSignLcdMode = EM_FACE_MODE0;        WRITE_nVAR(FV.Other.gbcSignLcdMode);        break;    case '3':        FV.Other.gbcSignLcdMode = EM_FACE_MODE3;        WRITE_nVAR(FV.Other.gbcSignLcdMode);        break;    case '4':        FV.Other.gbcSignLcdMode = EM_FACE_MODE4;        WRITE_nVAR(FV.Other.gbcSignLcdMode);        break;    default :        break;    }#endif#endif    return NORMAL;}

/*****************************************************************函数原型：SystemCheck功能描述：本函数为系统检测参数描述：无参数名称：	输入/输出？	类型		描述-----------		-----------	------	   	------- 作    者： 刘及华 日	  期： 2012-11-28返 回 值：有			 1:成功			 0:失败*****************************************************************/INT8U SystemCheck(){	INT8U   ret = 0;	//SAM卡检测	EA_vCls();//  EA_vDisp(2, 1, "  PSAM卡检测中...   ");//  (void)EA_uiInkeyMs(2000);	ret = SamCheck();	if ( ret != ok )	{		EA_vCls();		lcddisp(1, 1, (void *)"   PSAM卡检测错误   ");		lcddisp(2, 1, (void *)"     请检查插槽     ");		(void)EA_uiInkeyMs(2000);		return notok;	}//  lcddisperr(" PSAM卡检测成功!");	return ok;}

void PubAbout( void ){	EA_vCls();	PubDisplayCen(1, "南京德基");//	PubGetFileInfo( szBuff );	PubDisplayCen(3, "Ver.010105");	PubDisplayCen(4, "福建联迪商用"   );	if (PubuiInkey(2) == EM_key_CANCEL)   //如果误选通讯方式(无线)，造成死机，在这里可以进行设置。		PubSetupSys();	return;}

/* * 函数功能：结算交易:包含正常商户结算和分期付款商户结算。 * 入口参数：无 * 出口参数：无 * 返 回 值：NORMAL —— 成功 *           EXCEPTION —— 失败 */int PubSettle(void){	EA_vCls();	PubDisplayInv(1, "结  算");//090924        ASSERT_NORMAL(PubConnect(&CommInfo));	if (FV.bank.cCommFlag == NAC)		FV.gbNacInfo.cPreState = 1;    POS_ASSERT(ProSettleNormal());                  //正常商户结算    return END;}

// *****************************************************************// 功能：		query_oil_price// 说明:		查询当前油价// 入口参数：	// 出口参数：	Null// 作者：	frank// 返回值：		Null		// *****************************************************************void query_oil_price(void){	//当前油价显示	EA_vCls();	EA_vDisplay(2, "天然气 :%2.2f元/立方", DevStat.price[0]/100.0);	EA_vDisplay(3, "汽油93#:%2.2f元/升 ", DevStat.price[1]/100.0);	EA_vDisplay(4, "汽油97#:%2.2f元/升 ", DevStat.price[2]/100.0);	EA_vDisplay(5, "柴  油 :%2.2f元/升 ", DevStat.price[3]/100.0);	//按任意键退出	(void)EA_uiInkey(0);	return;}

//end 20120713int ProFuncOthergbszSignPanelPort(void *p1,void *p2){    char cOption;    uint uiKey;    if(memcmp(FV.Other.gbszSignPanelPort, "USBH", 4) == 0)        cOption = 4;    else if(memcmp(FV.Other.gbszSignPanelPort, "COM2", 4) == 0)        cOption = 2;    else if(memcmp(FV.Other.gbszSignPanelPort, "COM3", 4) == 0)        cOption = 3;    else        cOption = 1;    EA_vCls();    PubDisplay(1 , "外置电子签字板串口");    PubDisplay(2 , "1 COM1");    PubDisplay(3 , "2 COM2");    PubDisplay(4 , "3 COM3 4 USBH [%d]", cOption);    uiKey = PubuiInkey(120);    switch(uiKey)    {    case EM_key_CANCEL:    case EM_key_NOHIT:        return CANCELED;    case EM_key_F1:    case EM_key_FEED:        return BACK;    case '2':        strcpy(FV.Other.gbszSignPanelPort, "COM2");        WRITE_nVAR(FV.Other.gbszSignPanelPort);        break;    case '3':        strcpy(FV.Other.gbszSignPanelPort, "COM3");        WRITE_nVAR(FV.Other.gbszSignPanelPort);        break;    case '1':        strcpy(FV.Other.gbszSignPanelPort, "COM1");        WRITE_nVAR(FV.Other.gbszSignPanelPort);        break;    case '4':        strcpy(FV.Other.gbszSignPanelPort, "USBH");        WRITE_nVAR(FV.Other.gbszSignPanelPort);        break;    default :        break;    }    return NORMAL;}

int iRestoreAllTmsVar (void *pAddress, uint uiSize){	EV_cfs_fHandle fHandle;	int_64 iLen;	if ((pAddress == EM_NULL) || (uiSize == 0) || (uiSize > sizeof(gbszTmsBuffer)))	{		EA_vCls();		PubDisplay(2, "参数错误.");		PubuiInkey(60);		return -1;	}	fHandle = EA_iCfsOpen(TMS_STRU_FILENAME, "r");	if (fHandle == 0)	{		PubDisplay(1, "EA_iCfsOpen Error");		PubDisplay(2, "[%d]", EA_iCfsGetError());		PubuiInkey(60);		return -1;	}	gbpAddressTms = pAddress;	gbuiSizeTms = uiSize;	if(EA_i64CfsSeek(fHandle , 0,SEEK_SET)<0)	{		PubDisplay(1, "EA_i64CfsSeek Error");		PubDisplay(2, "[%d]", EA_iCfsGetError());		EA_iCfsClose(fHandle);		PubuiInkey(60);		return -1;	}	// 从文件读全部数据到备份缓冲区	iLen = EA_i64CfsPread(fHandle, (void *)gbszTmsBuffer, gbuiSizeTms, 0);	if ( iLen != gbuiSizeTms)	{				PubDisplay(1, "EA_i64CfsPread Error");		PubDisplay(2, "[%d]", EA_iCfsGetError());		EA_iCfsClose(fHandle);		PubuiInkey(60);		return -1;	}	// 把数据存放到TMS结构中	memcpy ( pAddress, gbszTmsBuffer, gbuiSizeTms );	EA_iCfsClose(fHandle);	return EM_SUCCESS;}

UINT8 ucInitRS232(DevHandle hDev, uchar ucBPS){	uchar ucRet = 0;		ucRet = EA_ucInitRS232(hDev, ucBPS, EM_232_NOPAR, EM_232_8DBS);	if (ucRet != EM_SUCCESS)	{		EA_vCls();		display(2, "打印口初始化失败[%02X]", ucRet);		inkey(0);		return 1;	}	return 0;	}

UINT8 ucClosePrinter(DevHandle *hDev){	uchar ucRet = 0;		ucRet = EA_ucCloseDevice(hDev);	if (ucRet != EM_SUCCESS)	{		EA_vCls();		display(2, "打印口关闭失败[%02X]", ucRet);		inkey(0);		return 1;	}	return 0;	}

//add by baijz 20120220 电子签字板设置int ProFuncOthergbcSignPanel(void *p1,void *p2){    char cOption;    uint uiKey;    cOption = FV.Other.gbcSignPanel;    EA_vCls();    PubDisplay(1 , "设置电子签字板类型");    PubDisplay(2 , "0 不支持电子签字");    PubDisplay(3 , "1 内置");    PubDisplay(4 , "2 外置      [%d]", cOption);    uiKey = PubuiInkey(120);    switch(uiKey)    {    case EM_key_CANCEL:    case EM_key_NOHIT:        return CANCELED;    case EM_key_F1:    case EM_key_FEED:        return BACK;    case '1':        FV.Other.gbcSignPanel = 1;        WRITE_nVAR(FV.Other.gbcSignPanel);        //strcpy(FV.Other.gbszSignPanelPort, "INSPAD");        //WRITE_nVAR(FV.Other.gbszSignPanelPort);        break;    case '2':        FV.Other.gbcSignPanel = 2;        WRITE_nVAR(FV.Other.gbcSignPanel);        break;    case '0':        FV.Other.gbcSignPanel = 0;        WRITE_nVAR(FV.Other.gbcSignPanel);        break;    default :        break;    }    if(FV.Other.gbcSignPanel == 1)    {        ProFuncOthergbcSignLcdMode(NULL,NULL);    }    else if(FV.Other.gbcSignPanel == 2)    {        ProFuncOthergbszSignPanelPort(NULL,NULL);    }    return NORMAL;}

int ProDisplayECBal(char * pszAddiAmount, int nLen){	DevHandle          hdlPinpad;	if (iPinpadType == 1) 	{		if (PubOpenDevice((char *)"PINPAD", EM_io_EPP, &hdlPinpad) != EM_SUCCESS)		{			EA_vCls();			PubDisplay(2, "无法打开密码键盘");			PubDisplay(3, "按任意键返回");			PubuiInkey(TIPS_TIMEOUT);			ASSERT_NORMAL(EXCEPTION);		}	        PubucDispPinpad(hdlPinpad, 1, (char *)"    ");		PubucDispPinpad(hdlPinpad, 2, (char *)"    ");    }	PubClearAll();	PubDisplay(2, "电子现金余额:");	PubDisplay(3, "%s", pszAddiAmount);	if (iPinpadType == 1)       //外置PINPAD    {        PubucDispPinpad(hdlPinpad, 1, (char*)"BALANCE:");		PubucDispPinpad(hdlPinpad, 2, pszAddiAmount);    }	if (IsDisplayExtRf(0) == YES)	{		EA_ucDisplay_ExtRF(gbMifCardHandle,2, 1," 余额:");		EA_ucDisplay_ExtRF(gbMifCardHandle,3, 1," %s", pszAddiAmount);		EA_ucDisplay_ExtRF(gbMifCardHandle,4, 1,"      ");	}	    PubuiInkey(TIPS_TIMEOUT);    if (iPinpadType == 1) 	{		ClearPinpadDisp(hdlPinpad);		while (EA_ucCloseDevice(&hdlPinpad) != EM_SUCCESS)			;	}    return NORMAL;}

int send_to_EFT(int len, char *p){	uchar ucRet;    DevHandle hRS232Handle;    ET_ProductInfo tProductInfo;	#ifdef EPT_A9L    memset(&tProductInfo, 0x00, sizeof(ET_ProductInfo));	EA_ucGetProductInfo(&tProductInfo);	if ( memcmp(tProductInfo.acName , "E520" , 4) == 0 && tProductInfo.ucMachType == 2)	{		ucRet = EA_ucOpenDevice("COM3", 0, &hRS232Handle);	}	else	{		ucRet = EA_ucOpenDevice(SERIAL_PORT, 0, &hRS232Handle);	}#else	ucRet = EA_ucOpenDevice("COM", EM_io_PORT1, &hRS232Handle);#endif	    if (ucRet != EM_SUCCESS)    {        EA_vCls();        EA_vDisplay(2, "打开RS232口出错");		EA_ucCloseDevice(&hRS232Handle);        PubuiInkey(3);        return (EXCEPTION);    }    EA_ucInitRS232(hRS232Handle, EM_232_9600BPS, EM_232_NOPAR, EM_232_8DBS);    EA_ucClearRS232(hRS232Handle);//清除RS232缓冲区	ucRet = EA_ucWriteDevice(hRS232Handle, (uint)len, 0, p);    EA_ucCloseDevice(&hRS232Handle);//    debug_print((char*)"SendToPC", p, len);    if (ucRet  == EM_io_SUCCESS)        return NORMAL;    else        return EXCEPTION;	return (NORMAL) ;}

/*****************************************************************函数原型：DisplayWelcomeMenu功能描述：本函数为显示欢迎界面参数描述：无参数名称：	输入/输出？	类型		描述-----------		-----------	------	   	-------返 回 值：无*****************************************************************/void DisplayWelcomeMenu(void){	EA_vCls();	EA_vDrawIcons();	EA_ucSetInverse(EM_lcd_INVOFF);	EA_vDisp(1, 1, " 淄博市公共汽车公司 ");	EA_vDisp(2, 1, "    手持POS加油机   ");	EA_vDisp(3, 6, (void *)VERSION);	if ( DevStat.record_number >= MAX_REC_NUM )	{		EA_vDisp(3, 1, "  记录已满, 请上传  ");	}	EA_vDisp(4, 1,     "设置    快捷    登陆");	return ;}

/************************************************************************ 函数名称: SendAdviceToHost* 功能描述: 向Host发送通知* 输入参数: * 输出参数:  * 返 回 值：0	 － 成功*			0xE0 － 与主机通信错误* 其它说明： * 修改日期		  版本号	 修改人 	  修改内容* * -------------------------------------------------* xxxx/xx/xx	   xxxx 	 xxx		  XXXX*************************************************************************/int SendAdviceToHost (){	uchar szGetBuffer[50];		PubGetBankcMacChk((char*)szGetBuffer);	if (szGetBuffer[0]!= MAC_ECB)	{		PubSetBankcMacChk(MAC_ECB);	}	PubCalcMac (FV.EmvStru.gbszScript, FV.EmvStru.gbnScriptLen - 8, FV.EmvStru.gbszScript + FV.EmvStru.gbnScriptLen - 8);//	WRITE_nVAR(FV.EmvStru.gbszScript); // 这里不需要保存，因为每次mac都要重新算	if (szGetBuffer[0]!= MAC_ECB)	{		PubSetBankcMacChk(szGetBuffer[0]);	}//  PubClearAll();	EA_vCls ();	ProDispCommMsg (7);//  PubDisplay(4, "处理中,请稍候..."); 	ASSURE_NORMAL(PubYlConnect(&CommInfo));	if (ProSendToHost (&CommInfo, FV.EmvStru.gbnScriptLen, FV.EmvStru.gbszScript) != NORMAL)		return EXCEPTION;	ProDispCommMsg (8);	BUFCLR (gbszReadStr);	if (ProReadFromHost (&CommInfo, &gbnReadLen, gbszReadStr) != NORMAL)		return EM_ERROR;	if (PubDispScriptMsg () != NORMAL)		return EM_ERROR;	PubSetScriptFlag (0);// by wei ，bctc检测要看放这里合适不。	return (0);}