自学教程：C++ GetLogicDate函数代码示例

int F847105(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret =0;	int i=0;	int origin_card_id = 0;	int bill_type=0;	char physical_no[40+1] = "";	char logicdate[11] = "";												//业务日期	char sysdate[11]="";	char lost_date[11]="";	char systime[9]="";	char sEndDate[9]="";	char sMsg[256]="";	T_t_pif_card		tCard;	T_t_pif_cardlossinfo cardlossinfo;	T_t_tif_tradeserial  tradeserial;//	T_t_tif_savdtl tSavdtl;	InAcc  IA;	memset(&tCard,0,sizeof(tCard));	memset(&cardlossinfo,0,sizeof(cardlossinfo));	memset(&tradeserial,0,sizeof(tradeserial));//	memset(&tSavdtl,0,sizeof(tSavdtl));	memset(&IA,0,sizeof(IA));	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);											//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	origin_card_id = rPack->lvol1;   										//原卡号	des2src(physical_no, rPack->sbank_acc);							//物理卡号	if(rPack->lvol1<1)	{		*pRetCode=E_INPUT_CARDNO_CANNOT_NULL;		goto L_RETU;	}	//查询支票经费本有无充值记录	/*	ret=ChkSavdtl(origin_card_id,&tSavdtl);	if(ret)	{		writelog(LOG_ERR,"ChkSavdtl ret[%d]",ret);		*pRetCode=ret;		goto L_RETU;	}	//Added by hhd at 2006-06-29 begin	//增加判断:如果入卡值大于100，检查经费本知否充值过	//否则不加任何判断，退款到现金中	if(amtcmp(rPack->damt2,100.00)<0)	{		tSavdtl.bill_type=TYPE_CASH;	}	*/	//Added by hhd at 2006-06-29 end	tradeserial.other_seri_no = 0;										//上传端流水号	tradeserial.serial_type=TXCODE_CALLBACK_CARD;						//功能号	tradeserial.serial_state = SERISTAT_DEBT;								//流水状态	des2src(tradeserial.operate_date,sysdate);							//发生日期	des2src(tradeserial.operate_time,systime);							//发生时间	des2src(tradeserial.collect_date,sysdate);								//采集日期	des2src(tradeserial.collect_time,systime);								//采集时间	des2src(tradeserial.enteract_date,logicdate);							//处理日期	des2src(tradeserial.enteract_time,systime);							//处理时间	tradeserial.maindevice_id = rPack->lvol6;								//上传工作站标识	tradeserial.device_id = rPack->lvol7;									//采集设备标识	tradeserial.purse_id = PURSE_NO_ONE;								//钱包号	tradeserial.sys_id = 0;												//外部系统标识	des2src(tradeserial.oper_code, rPack->scust_limit);					//操作员号	tradeserial.card_id=origin_card_id;	ret=DB_t_pif_card_read_lock_by_cur_and_card_id(origin_card_id,&tCard);	if(ret)	{		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_R;		goto L_RETU;	}//	writelog(LOG_DEBUG,"input card_id[%d] card_id[%d]",origin_card_id,tCard.card_id);	tradeserial.customer_id = tCard.cosumer_id;							//客户标识	if(strncmp(tCard.state_id,CARDSTAT_REG,4)==0)	{		//检查物理卡号是否一致		trim(physical_no);		trim(tCard.physical_no);		if(strcmp(tCard.physical_no,physical_no)!=0)		{			DB_t_pif_card_free_lock_by_cur();			writelog(LOG_ERR,"db physical_no[%s],input physical_no[%s]",tCard.physical_no,physical_no);			*pRetCode= E_CARD_PHYNO_DIFFER;			goto L_RETU;		}	}	else if('2'==tCard.state_id[CARDSTAT_TYPE_REG])//.........这里部分代码省略.........

int Do_Compare_file_shoudong(){///*	FILE *fp;	TIniFile tf;	char path_name[256]="";	char file_name[256]="";	int ret=0;	int cnt=0;	int i=0;	BANK_COMPARE_RECODE compare,compare1;	T_t_tif_bank_comp	bank_comp;	T_t_tif_report_trans_comp trans_comp;	T_t_tif_tradeserial	tradeserial;	T_t_tif_tradeserial_his his_tradeserial;	T_t_tif_diff_transfer  diff_transfer;	char logicdate[10]="";	char tmp_date[10]="";	char forward_date[10]="";	double trans_count=0;	double bank_count=0;	double trans_amt=0;	double bank_amt=0;	double second=0;	double temp=0;	char *p=getenv("BIN_PATH");	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		writelog(LOG_ERR,"GetLogicDate error,errcode=[%d]",ret);		return ret;	}	ret=datetime2second(logicdate, "YYYYMMDD", &second);	if(ret)	{		writelog(LOG_ERR,"datetime2second error,errcode=[%d]",ret);		return 	ret;	}	 //trans_count=0;	 //bank_count=0;	 //trans_amt=0;	// bank_amt=0;	second=second-24*60*60;	ret=second2datetime(second, forward_date, "YYYYMMDD");	if(ret)	{		writelog(LOG_ERR,"second2datetime error,errcode=[%d]",ret);		return 	ret;	}	memset(&bank_comp,0,sizeof(bank_comp));	memset(&compare,0,sizeof(compare));	memset(&trans_comp,0,sizeof(trans_comp));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&his_tradeserial,0,sizeof(his_tradeserial));	memset(&compare1,0x30,sizeof(compare1));	ret=DB_t_tif_report_trans_comp_read_by_cmp_date(forward_date,&trans_comp);	if(ret!=100&&ret!=0)	{		writelog(LOG_ERR,"DB_t_tif_report_trans_comp_read_by_cmp_date error,errcode=[%d]",ret);		goto LRet;	}	if(1==trans_comp.cmp_flag)	{		writelog(LOG_ERR,"trans_comp.cmp_flag =1,already compare!");		goto LRet;	}	//配置环境变量	if(p==NULL)	{	   	writelog(LOG_ERR,"Cann't get env HOME PATH/n");	   	return -1;	}	//sprintf(path_name,"%s/ftp",p);	sprintf(path_name,"%s",p);	//strcpy(path_name,"/bank/ykt/src/bank/ftp");	sprintf(file_name,"%s/XYK00002.%8.8s",path_name,forward_date);	writelog(LOG_ERR,"Open indirect file=[%s]",file_name);	if((fp = fopen(file_name,"rb"))==NULL)	{		writelog(LOG_ERR,"Open indirect file error,file=[%s]",file_name);		return	-1;	}	while(!feof(fp))	{		memset(&bank_comp,0,sizeof(bank_comp));		memset(&compare,0,sizeof(compare));		cnt++;		if(NULL==fgets((char *)(&compare),sizeof(compare),fp))		{//.........这里部分代码省略.........

int F847104(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret =0;	int len = 0;	int i=0;	int hi_cutid=0;	char h_showcardid[11] = "";						//显示卡号	char h_password[7] = "";							//卡密码	double h_temp_Card_id = 0;						//卡号	double dSerialNo=0;	char seed_key[17] = "";							//种子密钥	char card_endtime[8 + 1] = "";						//卡的有效截至日期	char logicdate[11]="";								//业务日期	char sysdate[11]="";	char systime[9]="";	char sEndDate[9]="";	char sMsg[256]="";	char sMaxCardBalance[20]="";	char lost_date[11]="";	char buf[64] = "";	int write_failed = 0;	double dMaxCardBalance=0;	int lost_card_id=0;	T_t_pif_card		tCard;	T_t_pif_card		tOldCard;	T_t_cif_customer 	tCustomer;	T_t_pif_spefee 	tSpeFee;    //	T_t_pif_cardlossinfo tCardLossInfo;	T_t_tif_tradeserial  tradeserial;	T_t_aif_account tAccount;	InAcc  IA;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_LVOL0,F_LVOL1,F_LVOL5,           F_SCUST_NO,	F_SCUST_NO2,F_SCUST_AUTH,F_SCUST_AUTH2,           F_SDATE0,F_SNAME,F_SNAME2,           F_SOPEN_EMP,F_SSTATUS0,           F_DAMT2,F_LSERIAL1,F_VSMESS,0);	memset(&tCard,0,sizeof(tCard));	memset(&tOldCard,0,sizeof(tOldCard));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tSpeFee,0,sizeof(tSpeFee));    //	memset(&tCardLossInfo,0,sizeof(tCardLossInfo));	memset(&tAccount,0,sizeof(tAccount));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&IA,0,sizeof(IA));	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);										//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	//检查客户信息，判断是否可以发行卡	hi_cutid=rPack->lvol0;									//客户号	des2src(tCard.physical_no, rPack->sbank_acc);				//物理卡号	trim(h_showcardid);	ret=IsExistFreezeCardByCustomId(hi_cutid);	if(ret)	{		*pRetCode = ret;		goto L_RETU;	}	ret=IsExistNoLostCardByCustomId(hi_cutid);	if(ret)	{		*pRetCode = ret;		goto L_RETU;	}	if(strlen(h_showcardid))	{		ret=IsExistShowCardNo(h_showcardid);		if(ret)		{			*pRetCode = ret;			goto L_RETU;		}	}	ret=IsExistCardByPhyCardNo(tCard.physical_no);	if(ret)	{		*pRetCode = ret;		goto L_RETU;	}	ret=GetLostCardIdByCustomId_TypeId(hi_cutid,CT_NORMAL,&lost_card_id);	if(ret)	{		writelog(LOG_ERR,"customer[%d]tCard type_id[%d]",hi_cutid,CT_NORMAL);		*pRetCode = ret;		goto L_RETU;	}    /*      ret=DB_t_pif_cardlossinfo_read_by_card_id_and_state_id(lost_card_id, STATE_VALID, &tCardLossInfo);//.........这里部分代码省略.........

/** * /brief 处理网银转账入账业务 * /param in_pack 请求报文包 * /param out_pack 输出报文包 * /param online_tx 联机交易，当为1时，如果个人账户已注销，则不能交易， *					当为0时，如果个人账户已注销，则借记 现金，贷记 营业成本 */int do_849009(ST_PACK *in_pack,char *szMsg,ST_PACK *out_pack,int online_tx){	int cust_id,card_id;	int subsidy_no;	int ret,count;	char temp[64];	double max_subsidy_money = 0.0;	double total_money,dSerial;	T_t_tif_subsidy subsidy;	T_t_tif_tradeserial tSerial;	T_t_aif_account account;	T_t_tif_meslist tMesList;	InAcc IA;	if(amtcmp(in_pack->damt0,0.0) <= 0)	{		writelog(LOG_DEBUG,"input money error!");		return E_INPUT_AMT;	}	memset(temp,0,sizeof temp);	ret = GetParameter(GLOBAL_MAX_PER_SUBSIDY,temp);	if(ret)	{		return ret;	}	max_subsidy_money = D4U5(atof(temp),2);		// 流水号	ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&dSerial);	if(ret)	{		return ret;	}	// 查询卡信息	ret = do_849008_query(in_pack,&cust_id,&card_id);	if(ret)	{		writelog(LOG_DEBUG,"query customer information error!,ret[%d]",ret);		return ret;	}	// 账户信息	memset(&account,0,sizeof account);	ret = DB_t_aif_account_read_by_card_id_and_purse_id(card_id,in_pack->lvol3,&account);	if(ret)	{		// 账户表无信息		if(DB_NOTFOUND == ret)			return E_DB_ACCOUNT_N;		else			return E_DB_ACCOUNT_R;	}	// 生成流水记录	memset(&tSerial,0,sizeof tSerial);	writelog(LOG_DEBUG,"cust_id[%d],Serial_no[%d]]",cust_id,in_pack->lvol2);	ret = do_849008_query_serial(cust_id,in_pack->lvol2,&tSerial);	if(ret)	{		return ret;	}	// 认为已经入账成功，直接返回结果	if(tSerial.serial_no > 0)	{		out_pack->lvol0 = tSerial.card_id;		out_pack->lvol1 = tSerial.serial_no;		out_pack->lvol2 = tSerial.customer_id;		out_pack->damt0 = tSerial.trade_fee;		return 0;	}		memset(&IA,0,sizeof IA);	tSerial.serial_no = D2I(dSerial);	tSerial.serial_type = TXCODE_NETFEE_TRANS; // 网银转账	tSerial.serial_state = SERISTAT_DEBT;	des2src(tSerial.oper_code,in_pack->scust_no2);	des2src(tSerial.operate_date,in_pack->sdate0);	des2src(tSerial.operate_time,in_pack->stime0);	GetLogicDate(tSerial.enteract_date);	getsystime(tSerial.enteract_time);	getsysdate(tSerial.collect_date);	des2src(tSerial.collect_time,tSerial.enteract_time);	tSerial.customer_id = cust_id;	tSerial.card_id = card_id;	tSerial.in_balance = 0.0;	tSerial.out_balance = 0.0;	tSerial.trade_fee = in_pack->damt0;	tSerial.other_seri_no = in_pack->lvol2; // 银行端流水号	if(account.current_state >= ACCOUNTSTAT_LOGOUT)	{		// 个人账户已经注销//.........这里部分代码省略.........

int F847132(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret=0;	int i=0;	int iTotalCnt=0;	double dTotalAmt=0.0;	double dSerialNo = 0;	char logicdate[11]="";										//业务日期	char sysdate[11]="";	char systime[9]="";	char sMsg[256]="";	T_t_tif_tradeserial  tradeserial;	T_t_tif_savdtl		tSavdtl;	T_t_tif_subsidy  	tSubsidy;	InAcc	IA;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	T_t_tif_meslist tMesList;	T_t_pif_device t_device;	T_t_pif_syskey tSyskey;	memset(&t_device,0,sizeof t_device);	memset(&tMesList,0,sizeof tMesList);	memset(&tSavdtl,0,sizeof(tSavdtl));	memset(&tSubsidy,0,sizeof(tSubsidy));	memset(&tSyskey,0,sizeof tSyskey);	memset(&tradeserial,0,sizeof(tradeserial));	memset(&IA,0,sizeof(IA));	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_VSMESS,0);	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);					//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	if(strlen(rPack->scust_limit)<1)	{		*pRetCode=E_INPUT_BATCH_NO;		goto L_RETU;	}	if(strlen(rPack->scust_no)<1)	{		*pRetCode=E_INPUT_OPER_NULL;		goto L_RETU;	}	//允许补助负金额	if(amtcmp(rPack->damt0,0)==0)	{		*pRetCode=E_INPUT_AMT;		goto L_RETU;	}	des2src(tSubsidy.summary,rPack->semail);		//补助摘要	if(strlen(rPack->semail)<1)	{		*pRetCode=E_INPUT_SUMMARY;		goto L_RETU;	}		des2src(tSubsidy.batch_no,rPack->scust_limit);	tSubsidy.bill_type=rPack->lvol2;					//票据类型	des2src(tSubsidy.bill_no,rPack->scust_auth2);	//票据号码	tSubsidy.amount=rPack->damt0;				//补助金额	des2src(tSubsidy.subsidytype,rPack->smain_flag);//补助标志(0增值1减值)	des2src(tSubsidy.subsidytype,"1");			//补助标志(0增值1减值)	des2src(tSubsidy.broker_id,rPack->sname);		//经办人身份证号	des2src(tSubsidy.broker_name,rPack->semail2);	//经办人姓名	IA.dArrInAmt[0]=tradeserial.trade_fee;	switch(tSubsidy.bill_type)	{		case TYPE_CASH:	//现金			IA.iArrInFeeSwitch[1]=1;			break;		case TYPE_BILL:	//支票			IA.iArrInFeeSwitch[2]=1;			break;		case TYPE_FUNDBOOK:	//经费本			IA.iArrInFeeSwitch[3]=1;			break;		default:			*pRetCode=E_INPUT_DEPOSIT_TYPE;			goto L_RETU;	}	/*	ret=get_batch_no_by_subsidy_no(tSubsidy.subsidy_no,tSubsidy.batch_no);	if(ret)	{		*pRetCode = E_DB_SUBSIDYTMP_R;		goto L_RETU;	}	*/	// 下发补助时才生成批次号	/*	ret=judge_with_max_subsidy_no_within_new(tSubsidy.subsidy_no);//.........这里部分代码省略.........

int F847102(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){  	int ret = 0;//	char logicdate[11] = "";//	char enddate[10 + 1] = "";	int	card_id = 0;	char	Operator[33+1] = "";//	int	Cut_id  = 0;	int	maindevice_id = 0;	int	device_id = 0;	char logicdate[11]="";	char sysdate[11]="";	char systime[9]="";	double	dUniqno = 0;	T_t_pif_cardlossinfo cardlossinfo;	T_t_tif_black_sheet black_sheet;	T_t_tif_tradeserial  tradeserial;       T_t_tif_meslist tMesList;	T_t_pif_card	tCard;	memset(&tradeserial,0,sizeof(tradeserial));	memset(&cardlossinfo,0,sizeof(cardlossinfo));	memset(&black_sheet,0,sizeof(black_sheet));	memset(&tMesList,0,sizeof(tMesList));	memset(&tCard,0,sizeof(tCard));	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	card_id = rPack->lvol1;													//卡标识//	Cut_id = rPack->lvol0;													//客户号	des2src(Operator,rPack->scust_limit);									//操作员号	maindevice_id = rPack->lvol6;											//上传工作站标识	device_id = rPack->lvol7;												//采集设备标识	//	检查客户信息，判断是否可以挂失	//修改卡标志，置为正常状态	ret=DB_t_pif_card_read_lock_by_cur_and_card_id(card_id, &tCard);	if(ret)	{		writelog(LOG_ERR,"card_id[%d]",card_id);		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_R;		goto L_RETU;	}	if(card_id!=tCard.card_id)	{		DB_t_pif_card_free_lock_by_cur();		writelog(LOG_ERR,"card_id[%d] db card_id[%d]",card_id,tCard.card_id);		*pRetCode=E_DB_CARD_R;		goto L_RETU;	}	if('2'==tCard.state_id[CARDSTAT_TYPE_REG])	{		DB_t_pif_card_free_lock_by_cur();		*pRetCode = E_CARDNO_LOGOUT;		goto L_RETU;	}	if('3'==tCard.state_id[CARDSTAT_TYPE_REG])	{		DB_t_pif_card_free_lock_by_cur();		*pRetCode = E_CARDNO_WFAIL;		goto L_RETU;	}		if(STATE_TRUE==tCard.state_id[CARDSTAT_TYPE_LOST])	{		DB_t_pif_card_free_lock_by_cur();		*pRetCode = E_CARDNO_LOST;		goto L_RETU;	}	tCard.state_id[CARDSTAT_TYPE_LOST]=STATE_TRUE;	//	修改卡状态为挂失	ret=DB_t_pif_card_update_lock_by_cur(&tCard);	if(ret)	{		writelog(LOG_ERR,"card_id[%d]",card_id);		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_U;		goto L_RETU;	}	DB_t_pif_card_free_lock_by_cur();	//	插入卡挂失有效期限表/*	ret=GetLostCardValiddate(sysdate,enddate);											//获得挂失有效期限	if (ret)	{		*pRetCode = ret;		goto L_RETU;	}	cardlossinfo.card_id = card_id;													//卡号//.........这里部分代码省略.........

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////系统模拟入账 int tend_to_enter_account(ST_PACK *in_pack,InAcc *IA,int trade_code,T_t_tif_tradeserial *tradeserial){	int ret = 0;	int i=0;	int	card_id = 0;	char	Operator[33+1] = "";	int	maindevice_id = 0;	int	device_id = 0;	char logicdate[11]="";	char sysdate[11]="";	char systime[9]="";	double dUniqno = 0;	char sMsg[256]="";	T_t_cif_customer 	tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_aif_account	tAccount;	T_t_pif_card	tCard;	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&tAccount,0,sizeof(tAccount));	memset(&tCard,0,sizeof(tCard));	card_id=in_pack->lvol0;		ret=get_datetime_from_db(sysdate,systime);	if(ret)	{		writelog(LOG_ERR,"get_datetime_from_db error,error code=[%d]",ret);		getsysdate(sysdate);		getsystime(systime);		return ret;	}	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		writelog(LOG_ERR,"GetLogicDate error,errcode=[%d]",ret);		return ret;	}	ret=DB_t_pif_card_read_by_card_id(card_id, &tCard);	if(ret)	{		if(DB_NOTFOUND==ret)			ret=E_CARDNO_NOT_EXIST;		else			ret=E_DB_CARD_R;		return ret;	}	if(strncmp(tCard.state_id,CARDSTAT_REG,4)!=0)	{		if('2'==tCard.state_id[CARDSTAT_TYPE_REG])			ret= E_CARDNO_LOGOUT;		else if('3'==tCard.state_id[CARDSTAT_TYPE_REG])			ret = E_CARD_CHANGE;		else if(tCard.state_id[CARDSTAT_TYPE_LOST]==STATE_TRUE)			ret=E_CARDNO_LOST;		else if(tCard.state_id[CARDSTAT_TYPE_FREEZE]==STATE_TRUE)			ret=E_CARDNO_FREEZE;		else if(tCard.state_id[CARDSTAT_TYPE_WFAIL]==STATE_TRUE)			ret=E_CARDNO_WFAIL;		return ret;	}		//根据卡号和钱包号得到消费者账号(借方)	ret=DB_t_aif_account_read_by_card_id_and_purse_id(card_id, PURSE_NO_ONE,&tAccount);	if(ret)	{		writelog(LOG_ERR,"DB_t_aif_account_read_by_card_id_and_purse_id ret[%d]card_id[%d]",ret,card_id);		if(DB_NOTFOUND==ret)			ret=E_ACTNO_NOT_EXIST;		else			ret=E_DB_ACCOUNT_R;		return ret;	}		ret=DB_t_cif_customer_read_lock_by_cur_and_cut_id(tCard.cosumer_id, &tCustomer);	if(ret)	{		writelog(LOG_ERR,"cut_id[%d]",tCard.cosumer_id);		if(DB_NOTFOUND==ret)			ret= E_CUSTOMER_NOT_EXIST;		else			ret= E_DB_CUSTOMER_R;		return ret;	}	//得到收费类别	if(0==tCustomer.fee_type)	{		ret=DB_t_pif_spefee_read_by_dept_code_and_cut_type(tCustomer.classdept_no, tCustomer.cut_type,&tSpeFee);		if(ret)		{			if(DB_NOTFOUND==ret)//.........这里部分代码省略.........

int F847127(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){    int i=0;    int ret =0;    char logicdate[11]="";										//业务日期    char sysdate[11]="";    char systime[9]="";    InAcc	IA;    char  ia_buf[1024]="";    double dUniqno = 0;    char sMsg[256]="";    T_t_tif_tradeserial tradeserial;    ST_CPACK aPack;    ST_PACK *out_pack = &(aPack.pack);    memset(&tradeserial,0,sizeof(tradeserial));    memset(&IA,0,sizeof(IA));    IA.pVoidPointer=ia_buf;    ResetNormalCPack(&aPack,0,1);    if(amtcmp(rPack->damt0,0)==0)    {        *pRetCode=E_INPUT_AMT_NULL;        goto L_RETU;    }    trim(rPack->sbank_acc);    trim(rPack->sbank_acc2);    if(strcmp(rPack->sbank_acc,rPack->sbank_acc2)==0)    {        *pRetCode=E_INPUT_2ACTNO_EQ;        goto L_RETU;    }    trim(rPack->scust_limit);    trim(rPack->scust_limit2);    trim(rPack->semp_pwd);    if(strlen(rPack->scust_limit)==0)    {        *pRetCode=E_INPUT_OPER_NULL;        goto L_RETU;    }    if(strlen(rPack->scust_limit2)==0)    {        *pRetCode=E_INPUT_OPER_NULL;        goto L_RETU;    }    if(strcmp(rPack->scust_limit,rPack->scust_limit2)==0)    {        writelog(LOG_ERR,"oper1[%s]oper2[%s]",rPack->scust_limit,rPack->scust_limit2);        *pRetCode=E_INPUT_2OPER_EQ;        goto L_RETU;    }    ret=chk_oper_pwd(rPack->scust_limit2,rPack->semp_pwd);    if(ret)    {        if(E_OPER_NOT_EXIST==ret)            *pRetCode=E_INPUT_OPER_EXIST;        else if(E_PASSWORD_WRONG==ret)            *pRetCode=E_INPUT_OPER_PWD;        else            *pRetCode=ret;        goto L_RETU;    }    getsysdate(sysdate);    getsystime(systime);    ret=GetLogicDate(logicdate);							//业务日期    if(ret)    {        *pRetCode=ret;        goto L_RETU;    }    tradeserial.trade_fee = rPack->damt0;						//发生金额    ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&dUniqno);  		//获得最大流水号    if(ret)    {        *pRetCode = ret;        writelog(LOG_ERR," ERRCODE = [%d]",ret);        goto L_RETU;    }    tradeserial.serial_no = D2I(dUniqno);							//流水号    tradeserial.other_seri_no = 0;								//上传端流水号    tradeserial.serial_type  = TXCODE_CARD_DBCR;				//交易码    tradeserial.serial_state = SERISTAT_DEBT;						//流水状态    des2src(tradeserial.operate_date,sysdate);					//发生日期    des2src(tradeserial.operate_time,systime);					//发生时间    des2src(tradeserial.collect_date,sysdate);						//采集日期    des2src(tradeserial.collect_time,systime);						//采集时间    des2src(tradeserial.enteract_date,logicdate);					//处理日期    des2src(tradeserial.enteract_time,systime);					//处理时间    tradeserial.maindevice_id = rPack->lvol6;						//上传工作站标识    tradeserial.in_balance=rPack->damt0;						//入卡值    tradeserial.trade_count=0;									//交易次数    des2src(tradeserial.oper_code,rPack->scust_limit);			//操作员代码    des2src(tradeserial.reserve_1,rPack->scust_limit2);			//错帐操作员代码    tradeserial.sys_id = 0;										//外部系统标识    IA.iCardNo=0;    IA.iFeeType=1;    IA.dArrInAmt[0]=tradeserial.trade_fee;    des2src(IA.sArrInActno[0],rPack->sbank_acc);				//借方帐号//.........这里部分代码省略.........

int F847106(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int i=0;	int ret =0;	char logicdate[11]="";										//业务日期	char sysdate[11]="";	char systime[9]="";	int	type=0;	InAcc	IA;	double dSerialNo = 0;	int card_id=0;	char physical_no[41]="";	char sMaxCardBalance[20]="";	char sMsg[256]="";	double dMaxCardBalance=0;	T_t_tif_tradeserial  tradeserial;	T_t_pif_card		tCard;	T_t_tif_savdtl		tSavdtl;	T_t_cif_customer tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_aif_account	tAccount;		//帐户表	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	memset(&tSavdtl,0,sizeof(tSavdtl));	memset(&tCard,0,sizeof(tCard));	memset(&tAccount,0,sizeof(tAccount));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&IA,0,sizeof(IA));	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_LSERIAL1,F_DAMT2,F_DAMT3,F_VSMESS,0);	if(amtcmp(rPack->damt0,0)<=0)	{		*pRetCode=E_INPUT_AMT;		goto L_RETU;	}	if(amtcmp(rPack->damt1,0)<0)	{		*pRetCode=E_INPUT_CARD_BALA;		goto L_RETU;	}	if(rPack->lvol10<1)	{		*pRetCode=E_INPUT_CARD_TXCNT;		goto L_RETU;	}	card_id=rPack->lvol0;	tradeserial.trade_fee = rPack->damt0;					//充值金额	des2src(physical_no, rPack->sbank_acc);				//物理卡号	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);							//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	ret=DB_t_pif_card_read_by_card_id(card_id, &tCard);	if(ret)	{		if(DB_NOTFOUND==ret)			*pRetCode=E_CARDNO_NOT_EXIST;		else			*pRetCode=E_DB_CARD_R;		goto L_RETU;	}	if(strncmp(tCard.state_id,CARDSTAT_REG,4)!=0)	{		if('2'==tCard.state_id[CARDSTAT_TYPE_REG])			*pRetCode = E_CARDNO_LOGOUT;		else if('3'==tCard.state_id[CARDSTAT_TYPE_REG])			*pRetCode = E_CARD_CHANGE;		else if(tCard.state_id[CARDSTAT_TYPE_LOST]==STATE_TRUE)			*pRetCode=E_CARDNO_LOST;		else if(tCard.state_id[CARDSTAT_TYPE_FREEZE]==STATE_TRUE)			*pRetCode=E_CARDNO_FREEZE;		else if(tCard.state_id[CARDSTAT_TYPE_WFAIL]==STATE_TRUE)			*pRetCode=E_CARDNO_WFAIL;		goto L_RETU;	}	trim(physical_no);	trim(tCard.physical_no);	if(strcmp(tCard.physical_no,physical_no)!=0)	{		writelog(LOG_ERR,"db physical_no[%s],input physical_no[%s]",tCard.physical_no,physical_no);		*pRetCode= E_CARD_PHYNO_DIFFER;		goto L_RETU;	}	//根据卡号和钱包号得到消费者账号(借方)	ret=DB_t_aif_account_read_by_card_id_and_purse_id(card_id, PURSE_NO_ONE,&tAccount);	if(ret)	{		writelog(LOG_ERR,"DB_t_aif_account_read_by_card_id_and_purse_id ret[%d]card_id[%d]",ret,card_id);		if(DB_NOTFOUND==ret)			*pRetCode=E_ACTNO_NOT_EXIST;//.........这里部分代码省略.........

//.........这里部分代码省略.........	{		*pRetCode = E_TX_SERIAL_CZ;		goto L_RETU;	}	if (tTradeserial.serial_state != SERISTAT_DEBT)	{		*pRetCode = E_TX_SERIAL_CANNOT_CZ;		goto L_RETU;	}	if (amtcmp(tTradeserial.trade_fee, 0) == 0)	{		*pRetCode = E_TX_SERIAL_CANNOT_CZ;		strcpy(szMsg,"交易金额有误!");		goto L_RETU;	}	ret = DB_t_tradecode_read_by_tradecode(tTradeserial.serial_type, &tTradeCode);	if (ret)	{		if (DB_NOTFOUND == ret)			*pRetCode = E_DB_TRADECODE_N;		else			*pRetCode = E_DB_TRADECODE_R;		goto L_RETU;	}	if (tTradeCode.rush_flag != IS_YES)	{		*pRetCode = E_TX_SERIAL_CANNOT_CZ;		strcpy(szMsg,"该交易不能被冲正");		goto L_RETU;	}	ret = GetLogicDate(logic_date);						//业务日期	if (ret)	{		*pRetCode = ret;		writelog(LOG_ERR, "GetLogicDate  err ret[%d]", ret);		goto L_RETU;	}	// 小于 0 , 则不判断	if (tTradeCode.rush_max_day >= 0)	{		ret = DiffDay(logic_date, tTradeserial.enteract_date, &days);		if (ret)		{			*pRetCode = ret;			goto L_RETU;		}		if (days > tTradeCode.rush_max_day)		{			writelog(LOG_ERR, "流水入账日期[%s],已超过期限[%d]天",					 tTradeserial.enteract_date, days);			*pRetCode = E_TX_SERIAL_CANNOT_CZ;			strcpy(szMsg, "流水日期已超过可冲正期限!");			goto L_RETU;		}	}	if (tTradeCode.restrict_oper == IS_YES)	{		if (strcmp(rPack->scust_limit, tTradeserial.opercode) != 0)		{			strcpy(szMsg, "必须由作此次交易的操作员来冲正");			*pRetCode = E_TX_SERIAL_CANNOT_CZ;			goto L_RETU;

int F847123(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret=0;	int card_id=0;	char sSeedKey[17] = "";							//种子密钥	char sPwd[7] = "";							//卡密码	char logicdate[11]="";	char sysdate[11]="";	char systime[9]="";	double dSerialno=0;	T_t_pif_card tCard;	T_t_cif_customer tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_aif_account  tAccount;	T_t_tif_tradeserial tTradeserial;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	memset(&tCard,0,sizeof(tCard));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&tAccount,0,sizeof(tAccount));	memset(&tTradeserial,0,sizeof(tTradeserial));	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_LVOL0,F_LVOL1,F_LVOL10,F_LVOL5,				F_SCUST_NO,	F_SCUST_NO2,F_SCUST_AUTH,F_SCUST_AUTH2,				F_SDATE0,F_SNAME,F_SNAME2,				F_SOPEN_EMP,F_SSTATUS0,				F_DAMT2,F_LSERIAL1,F_VSMESS,0);	card_id=rPack->lvol0;	if(card_id<1)	{		*pRetCode=E_INPUT_CARDNO;		goto L_RETU;	}	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	//判断卡状态是否为写卡未成功状态	ret=DB_t_pif_card_read_lock_by_cur_and_card_id(card_id, &tCard);	if(ret)	{		writelog(LOG_ERR,"card_id[%d]",card_id);		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_R;		goto L_RETU;	}	if(card_id!=tCard.card_id)	{		writelog(LOG_ERR,"card_id[%d] db card_id[%d]",card_id,tCard.card_id);		DB_t_pif_card_free_lock_by_cur();		*pRetCode=E_DB_CARD_R;		goto L_RETU;	}	if('3'!=tCard.state_id[CARDSTAT_TYPE_REG])	{		DB_t_pif_card_free_lock_by_cur();		if('2'==tCard.state_id[CARDSTAT_TYPE_REG])			*pRetCode=E_CARDNO_LOGOUT;		else if(STATE_TRUE==tCard.state_id[CARDSTAT_TYPE_LOST])			*pRetCode=E_CARDNO_LOST;		else if(STATE_TRUE==tCard.state_id[CARDSTAT_TYPE_FREEZE])			*pRetCode=E_CARDNO_FREEZE;		else if(STATE_TRUE==tCard.state_id[CARDSTAT_TYPE_WFAIL])			*pRetCode=E_CARDNO_WFAIL;		else if(STATE_TRUE==tCard.state_id[CARDSTAT_TYPE_REG])			*pRetCode=E_OLDCARDINFO_NOSAVE;		goto L_RETU;	}	trim(rPack->sbank_acc);	trim(rPack->scust_no);	trim(rPack->sdate0);	if(strlen(rPack->scust_no))	{		ret=IsExistShowCardNo(rPack->scust_no);		if(ret)		{			*pRetCode = ret;			goto L_RETU;		}	}	if(strcmp(tCard.physical_no,rPack->sbank_acc)!=0)	{		ret=IsExistCardByPhyCardNo(rPack->sbank_acc);		if(ret)		{			*pRetCode = ret;			goto L_RETU;		}	}	ret=IsInvalidDateTime(rPack->sdate0,"YYYYMMDD");//.........这里部分代码省略.........

int F930032(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg) {    int ret = 0;						//返回码    int hi_sign = 0;					//挂失解挂标志    double h_temp_Serial_no = 0;		//本地流水号    char logicdate[11]="";    char sysdate[11]="";    char systime[9]="";    int dev_id=0;    T_t_tif_tradeserial  tradeserial;    memset(&tradeserial,0,sizeof(tradeserial));    hi_sign = in_pack->lvol6;												//挂失解挂标志    ret=chk_dyn_key(in_pack->lcert_code,in_pack->scust_limit2);    if(ret) {        *pRetCode = ret;        goto L_RETU;    }    getsysdate(sysdate);    getsystime(systime);    ret=GetLogicDate(logicdate);												//业务日期    if(ret) {        *pRetCode = ret;        goto L_RETU;    }    switch (hi_sign) {    case 0:        tradeserial.serial_type = TXCODE_CARD_LOSS;					//挂失        break;    case 1:        tradeserial.serial_type = TXCODE_CARD_COMEBACK_LOSS;			//解挂        break;    case 2:        tradeserial.serial_type = TXCODE_MODIFICATIONPW;				//修改密码        break;    default:        *pRetCode = -1;        writelog(LOG_ERR,"挂失解挂修改密码标志出错。ERRCODE[%d] ",*pRetCode);        goto L_RETU;        break;    }    /*	读取设备ID	*/    ret = GetDevIdByDevPhyId(&dev_id,in_pack->sdate1);    if (ret) {        *pRetCode = ret;        writelog(LOG_ERR,"GetDevIdByDevPhyId err[%d] ",ret);        goto L_RETU;    }    tradeserial.serial_state = SERISTAT_NODEBT;								//流水状态    ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&h_temp_Serial_no);    if(ret) {        *pRetCode = ret;        writelog(LOG_ERR,"获取最大流水号错误: ERRCODE = [%d]",ret);        goto L_RETU;    }    tradeserial.serial_no = D2I(h_temp_Serial_no);													//流水号    snprintf(tradeserial.operate_date,9,"20%s",in_pack->spost_code);		//发生日期(格式化输入的日期)    des2src(tradeserial.operate_time,in_pack->spost_code2);			//发生时间(格式化输入的时间)    des2src(tradeserial.collect_date,sysdate);												//采集日期    des2src(tradeserial.collect_time,systime);												//采集时间    des2src(tradeserial.enteract_date,logicdate);											//处理日期    des2src(tradeserial.enteract_time,systime);											//处理时间    tradeserial.other_seri_no = in_pack->lvol4;													//上传端流水号    tradeserial.serial_state = SERISTAT_DEBT;													//流水状态    tradeserial.maindeviceid = in_pack->lcert_code;												//上传工作站标识    tradeserial.deviceid = dev_id;														//采集设备标识    tradeserial.cardno = in_pack->lvol5;														//卡号    Strncpy_t(tradeserial.showid,in_pack->sstation0,sizeof(tradeserial.showid));						//显示卡号    Strncpy_t(tradeserial.oldpwd,in_pack->sstock_code,sizeof(tradeserial.oldpwd));					//原始密码    Strncpy_t(tradeserial.newpwd,in_pack->sstock_code2,sizeof(tradeserial.newpwd));				//更新密码    des2src(tradeserial.opercode,"system");    ret = DB_t_tif_tradeserial_add(&tradeserial);    if (ret) {        writelog(LOG_ERR,"ret[%d]",ret);        if(DB_REPEAT==ret)            *pRetCode = E_DB_TRADESERIAL_E;        else            *pRetCode = E_DB_TRADESERIAL_I;        goto L_RETU;    }    return 0;L_RETU:    return -1;}

//.........这里部分代码省略.........		*pRetCode = ret;		goto L_RETU;	}	// 查询组可解款余额	memset(&group_cash,0,sizeof group_cash);	ret = DB_t_group_cash_report_read_lock_by_c1_and_groupid(old_serial.showid,&group_cash);	if(ret)	{		if(DB_NOTFOUND == ret)			*pRetCode = E_FAN_ACC_NOT_EXISTS;		else			*pRetCode = E_DB_GRP_CASH_RPT_R;		goto L_RETU;	}		/*	if(amtcmp(tx_money,group_cash.cur_money)>0)	{		*pRetCode = E_FAN_ACC_INSUFFICIENT;		DB_t_group_cash_report_free_lock_by_c1();		goto L_RETU;	}	*/	// 生成流水	memset(&serial,0,sizeof serial);	serial.serial_no = (int)dUniNo;	serial.serial_state = SERISTAT_DEBT;	serial.serial_type = TXCODE_FAN_RUSH_PAY;	getsysdate(serial.operate_date);	getsystime(serial.operate_time);	des2src(serial.collect_date,serial.operate_date);	des2src(serial.collect_time,serial.operate_time);	GetLogicDate(serial.enteract_date);	des2src(serial.enteract_time,serial.operate_time);	des2src(serial.opercode,rPack->scard0);	des2src(serial.reserve_1,rPack->scert_addr);	serial.cardbefbal = tx_money;	serial.trade_fee = tx_money * -1;	// 商户号	des2src(serial.showid,old_serial.showid);	// 入账	memset(&IA,0,sizeof IA);	IA.dArrInAmt[0] = serial.trade_fee;	IA.iCardNo = 0;	//收费类别为 1	IA.iFeeType = 1;	IA.iTxFlag = ACC_TYPE_RUSH;	IA.pVoidPointer = ia_buf;	ret = process(&IA,&serial);	if(ret)	{		writelog(LOG_ERR,"account process error [%d]",ret);		*pRetCode  = ret;		DB_t_group_cash_report_free_lock_by_c1();		goto L_RETU;	}	SetCol(handle,0);	SetCol(handle,F_VSMESS,F_LVOL1,F_DAMT1,F_DAMT2,F_SBANK_ACC,0);		sprintf(out_pack->vsmess,"流水号:%d ",IA.iSerialNo);	for(i=1;i<=IA.iOutTxTypeCnt;i++)	{		if(amtcmp(IA.dArrOutAmt[i],0)!=0)

int F847222(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret=0;	char  ia_buf[1024]="";	char sMsg[256]="";	double dUniNo;	InAcc IA;	T_t_tif_tradeserial serial;	T_t_aif_account account;	T_t_cif_shop shop;	trade_param_t param;	int shop_id;		ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	int i;	ResetNormalCPack(&aPack,0,1);	shop_id = atoi(rPack->sbank_acc);	if(shop_id <= 0)	{		*pRetCode = E_SHOP_ACTNO_NOT_EXIST;		goto L_RETU;	}	if(strlen(rPack->scard0) <= 0)	{		*pRetCode = E_OPER_NOT_EXIST;		goto L_RETU;	}	if(amtcmp(rPack->damt1,0)<=0)	{		*pRetCode = E_INPUT_AMT;		goto L_RETU;	}	ret = CheckOperatorPwd(rPack->scard0,rPack->semp_pwd);	if(ret)	{		*pRetCode = ret;		goto L_RETU;	}	memset(&account,0,sizeof account);	memset(&shop,0,sizeof shop);		ret = DB_t_cif_shop_read_by_shop_id(shop_id,&shop);	if(ret)	{		if(DB_NOTFOUND == ret)			*pRetCode  = E_SHOP_ACTNO_NOT_EXIST;		else			*pRetCode = E_DB_SHOP_R;		goto L_RETU;	}	if(strcmp(shop.is_indep, TYPE_YES))	{		*pRetCode = E_FAN_SHOP_NOT_INDEP;		goto L_RETU;	}	memset(&IA,0,sizeof IA);	memset(&param,0,sizeof param);	param.pIA = &IA;	IA.pVoidPointer = ia_buf;	param.shop_id = shop.shop_id;	param.remain_balance = rPack->damt1;		ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&dUniNo);	if(ret)	{		*pRetCode = ret;		goto L_RETU;	}	param.serial_no = D2I(dUniNo);	//初始化流水记录	memset(&serial,0,sizeof serial);	serial.serial_no = param.serial_no;	serial.serial_state = SERISTAT_DEBT;	serial.serial_type = TXCODE_FAN_BALANCE;	// 借用显示卡号字段保存商户号	sprintf(serial.showid,"%d",param.shop_id);	getsysdate(serial.operate_date);	getsystime(serial.operate_time);	des2src(serial.collect_date,serial.operate_date);	des2src(serial.collect_time,serial.operate_time);	// 客户号	serial.customer_id = shop.cut_id;	GetLogicDate(serial.enteract_date);	des2src(serial.enteract_time,serial.operate_time);	des2src(serial.oper_code,rPack->scard0);	des2src(serial.reserve_1,rPack->scert_addr);	serial.in_balance = param.remain_balance;	serial.trade_fee = param.remain_balance;	des2src(param.tx_date,serial.operate_date);	des2src(param.tx_time,serial.operate_time);	des2src(param.oper_code,rPack->scard0);	//.........这里部分代码省略.........

int F847108(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg){	int ret = 0;	int card_id = 0;	char logicdate[11]="";	double dUniqNo = 0; 	T_t_pif_card  card;    T_t_tif_writefailed tWriteFailed;    	memset(&card,0,sizeof(card));    memset(&tWriteFailed, 0, sizeof tWriteFailed);    	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	//修改原卡状态为发卡写卡失败状态	card_id = in_pack->lvol0;	if(in_pack->lvol0<1)	{		writelog(LOG_ERR,"in_pack->lserial1[%d]",in_pack->lvol0);		*pRetCode=E_INPUT_CARDNO;		goto L_RETU;	}	if(in_pack->lserial1<1)	{		writelog(LOG_ERR,"in_pack->lserial1[%d]",in_pack->lserial1);		*pRetCode= E_INPUT_SERIALNO;		goto L_RETU;	}	ret=DB_t_pif_card_read_lock_by_cur_and_card_id(card_id, &card);	if(ret)	{		writelog(LOG_ERR,"card_id[%d]",card_id);		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_R;		goto L_RETU;	}	if (STATE_FALSE == card.state_id[CARDSTAT_TYPE_WFAIL])	{	    card.state_id[CARDSTAT_TYPE_WFAIL]=STATE_TRUE;	}	ret=DB_t_pif_card_update_lock_by_cur(&card);	if(ret)	{		writelog(LOG_ERR,"card_id[%d]",card_id);		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_U;		goto L_RETU;	}	DB_t_pif_card_free_lock_by_cur();        //写入写卡失败表	ret = getNewUniqNo(KEYTYPE_WRITEFAILED, &dUniqNo);              //获得写卡失败表最大ID号    if (ret)    {        writelog(LOG_ERR,"ret[%d]",ret);        *pRetCode = ret;        goto L_RETU;    }	tWriteFailed.id = D2I(dUniqNo);	tWriteFailed.card_id = card_id;	tWriteFailed.serial_no = in_pack->lserial1;	tWriteFailed.serial_type = TXCODE_WRITE_ERROR;	tWriteFailed.purese_no = PURSE_NO_ONE;	tWriteFailed.deal_flag[0] = CARDWFAIL_PACKET_DEAL_FLAG_Y;	des2src(tWriteFailed.tx_date,logicdate);	des2src(tWriteFailed.comments, "发卡失败");		ret = DB_t_tif_writefailed_add(&tWriteFailed);	if (ret)	{	    *pRetCode = E_DB_WRITEFAILED_I;        goto L_RETU;    	}/*	memset(card.comments,0,sizeof(card.comments));	AddXmlItemStr(card.comments, XML_KEY_OPERATEDATE,logicdate);	AddXmlItemInt(card.comments,XML_KEY_SERIALNO,in_pack->lserial1);	AddXmlItemInt(card.comments,XML_KEY_TRADECODE,in_pack->lvol2);*/		return 0;L_RETU:	return -1;}

int F847119(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret=0;	char logicdate[11]="";	char sysdate[11]="";	char systime[9]="";	char operate_date[11]="";	char sSerialno[20]="";	char physical_no[41]="";	char old_physical_no[41]="";	int 	iSerialno=0;	int 	card_id=0;	int 	serial_type=0;	int   flag=0;	double dSerialno=0;	double  dAmt=0;	char h_password[7] = "";							//卡密码	char seed_key[17] = "";							//种子密钥	int card_use_cnt=0;	int seri_use_cnt=0;	double seri_in_bala=0;	double seri_out_bala=0;	double seri_in_bala_next=0;	double seri_out_bala_next=0;	int amt_flag=0;	char tx_date[11]="";	T_t_pif_card tCard;	T_t_cif_customer  tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_tif_tradeserial tradeserial;	T_t_tif_tradeserial old_tradeserial;	T_t_tif_tradeserial_his tradeserialhis;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	memset(&tCard,0,sizeof(tCard));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&old_tradeserial,0,sizeof(old_tradeserial));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&tradeserialhis,0,sizeof(tradeserialhis));	memcpy(seed_key,STATIC_SEED_KEY,sizeof(seed_key));		//读种子密钥	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_LVOL0,F_LVOL1,F_LVOL5,F_LVOL6,				F_SCUST_NO,	F_SCUST_NO2,F_SCUST_AUTH,F_SCUST_AUTH2,				F_SDATE0,F_SNAME,F_SNAME2,				F_SOPEN_EMP,F_SSTATUS0,				F_DAMT2,F_LSERIAL1,F_VSMESS,0);	des2src(physical_no,rPack->sbank_acc);	card_id=rPack->lvol0;	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	//判断卡状态是否为写卡未成功状态	ret=DB_t_pif_card_read_by_card_id(card_id, &tCard);	if(ret)	{		writelog(LOG_ERR,"card_id[%d]",card_id);		if(DB_NOTFOUND==ret)			*pRetCode= E_CARDNO_NOT_EXIST;		else			*pRetCode= E_DB_CARD_R;		goto L_RETU;	}	if(STATE_FALSE==tCard.state_id[CARDSTAT_TYPE_WFAIL])	{		*pRetCode=E_CARDSTATE_NOTWRITEFAIL;		goto L_RETU;	}	ret=GetXmlValue(sSerialno, sizeof(sSerialno), XML_KEY_SERIALNO, tCard.comments);	if(ret)	{		DB_t_pif_card_free_lock_by_cur();		*pRetCode=ret;		goto L_RETU;	}	//修改账号表中的卡状态	//根据流水号得到补卡的出卡值	ret=GetXmlValue(operate_date, sizeof(operate_date), XML_KEY_OPERATEDATE, tCard.comments);	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	iSerialno=atoi(sSerialno);	if(strncmp(logicdate,operate_date,8)==0)	{		ret=DB_t_tif_tradeserial_read_by_serial_no(iSerialno,&old_tradeserial);		if(ret)		{//.........这里部分代码省略.........

//.........这里部分代码省略.........	}	if (tTradeserial.serial_state != SERISTAT_DEBT)	{		*pRetCode = E_TX_SERIAL_CANNOT_CZ;		goto L_RETU;	}	/*	if (amtcmp(tTradeserial.trade_fee, 0) <= 0)	{		*pRetCode = E_TX_SERIAL_CANNOT_CZ;		strcpy(szMsg,"交易金额有误!");		goto L_RETU;	}	*/	ret = DB_t_pif_tradecode_read_by_tradecode(tTradeserial.serial_type, &tTradeCode);	if (ret)	{		if (DB_NOTFOUND == ret)		{			writelog(LOG_ERR,"补冲正交易码[%d]不存在",tTradeserial.serial_type);			*pRetCode = E_DB_TRADECODE_N;		}		else			*pRetCode = E_DB_TRADECODE_R;		goto L_RETU;	}	if (strcmp(tTradeCode.flag,TYPE_YES) != 0)	{		*pRetCode = E_TX_SERIAL_CANNOT_CZ;		goto L_RETU;	}	ret = GetLogicDate(logic_date);						//业务日期	if (ret)	{		*pRetCode = ret;		writelog(LOG_ERR, "GetLogicDate  err ret[%d]", ret);		goto L_RETU;	}	/*// 小于 0 , 则不判断	if (tTradeCode.rush_max_day >= 0)	{		ret = DiffDay(logic_date, tTradeserial.enteract_date, &days);		if (ret)		{			writelog(LOG_ERR,"ret[%d]date1[%s]date2[%s]",ret,					 logic_date,tTradeserial.enteract_date);			*pRetCode = ret;			goto L_RETU;		}		writelog(LOG_DEBUG,"tradecode[%d]max day[%d]diff day[%d]",tTradeCode.tradecode				 ,tTradeCode.rush_max_day,days);		if (days > tTradeCode.rush_max_day)		{			writelog(LOG_ERR, "流水入账日期[%s],已超过期限[%d]天",					 tTradeserial.enteract_date, days-tTradeCode.rush_max_day);			*pRetCode = E_TX_SERIAL_CANNOT_CZ;			strcpy(szMsg, "流水入账日期已超过可冲正期限!");			goto L_RETU;		}	}	if (tTradeCode.restrict_oper == IS_YES)	{		if (strcmp(rPack->scust_limit, tTradeserial.oper_code) != 0)

int F847103(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){  	int ret = 0;	int	hi_cardid = 0;	char	hi_Operator[33+1] = "";	int	hi_Cut_id  = 0;	int	hi_maindevice_id = 0;	int	hi_device_id = 0;	double	h_temp_Serial_no = 0;	char  logicdate[11]="";	char sysdate[11]="";	char systime[8]="";	char dbdate[9]="";	char dbtime[7]="";	char volume[13]="";	T_t_tif_tradeserial tradeserial;	T_t_pif_card		tCard;       T_t_tif_meslist tMesList;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	ResetNormalCPack(&aPack,0,1);		//用于根据请求包整理本CPACK包的头清空包头位图和包体中的数据	memset(&tradeserial,0,sizeof(tradeserial));	memset(&tCard,0,sizeof(tCard));	memset(&tMesList,0,sizeof(tMesList));	hi_cardid = rPack->lvol1;													//卡标识	hi_Cut_id = rPack->lvol2;													//客户号	des2src(hi_Operator,rPack->scust_limit);										//操作员号	hi_maindevice_id = rPack->lvol6;											//上传工作站标识	hi_device_id = rPack->lvol7;												//采集设备标识	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	//	检查卡状态是否为挂失	ret = DB_t_pif_card_read_by_card_id(hi_cardid,&tCard);	if (ret)	{		writelog(LOG_ERR,"card_id[%d]",hi_cardid);		if(DB_NOTFOUND==ret)			*pRetCode = E_CARDNO_NOT_EXIST;		else			*pRetCode=E_DB_CARD_R;		goto L_RETU;	}	if(hi_cardid!=tCard.card_id)	{		writelog(LOG_ERR,"card_id[%d] db card_id[%d]",hi_cardid,tCard.card_id);		*pRetCode=E_DB_CARD_R;		goto L_RETU;	}	if('2'==tCard.state_id[CARDSTAT_TYPE_REG])	{		*pRetCode = E_CARDNO_LOGOUT;		goto L_RETU;	}	if(STATE_TRUE==tCard.state_id[CARDSTAT_TYPE_FREEZE])	{		*pRetCode = E_CARDNO_FREEZE;		goto L_RETU;	}	ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&h_temp_Serial_no);  					//获得最大流水号	if(ret)	{		*pRetCode = ret;		writelog(LOG_ERR,"ERRCODE = [%d]",ret);		goto L_RETU;	}	des2src(tradeserial.operate_date,sysdate);											//发生日期	des2src(tradeserial.operate_time,systime);											//发生时间	des2src(tradeserial.collect_date,sysdate);												//采集日期	des2src(tradeserial.collect_time,systime);												//采集时间	des2src(tradeserial.enteract_date,logicdate);											//处理日期	des2src(tradeserial.enteract_time,systime);											//处理时间	tradeserial.serial_no = (int)h_temp_Serial_no;											//流水号	tradeserial.serial_type = TXCODE_CARD_COMEBACK_LOSS;								//解挂	tradeserial.serial_state = SERISTAT_NONEEDDEBT;								//流水状态	tradeserial.maindevice_id = hi_maindevice_id;									//上传工作站标识	tradeserial.device_id = hi_device_id;											//采集设备标识	tradeserial.card_id = hi_cardid;													//交易卡号	tradeserial.customer_id = hi_Cut_id;	des2src(tradeserial.oper_code, hi_Operator);		if(STATE_FALSE==tCard.state_id[CARDSTAT_TYPE_LOST])	{		//允许重复解挂		//再下传白名单		//	插入黑名单表		ret=InsertToBlkList(hi_cardid,DELETE_BLACKLIST);		if(ret)		{			*pRetCode=ret;			writelog(LOG_ERR,"InsertToBlkList err[%d]",ret);//.........这里部分代码省略.........

int F847132(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret=0;	int i=0;	int iTotalCnt=0;	double dTotalAmt=0.0;	double dSerialNo = 0;	char logicdate[11]="";										//业务日期	char sysdate[11]="";	char systime[9]="";	char sMsg[256]="";	T_t_tif_tradeserial  tradeserial;	T_t_tif_savdtl		tSavdtl;	T_t_tif_subsidy  	tSubsidy;	InAcc	IA;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	memset(&tSavdtl,0,sizeof(tSavdtl));	memset(&tSubsidy,0,sizeof(tSubsidy));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&IA,0,sizeof(IA));	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_VSMESS,0);	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);					//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	if(strlen(rPack->scust_limit)<1)	{		*pRetCode=E_INPUT_BATCH_NO;		goto L_RETU;	}	if(strlen(rPack->scust_no)<1)	{		*pRetCode=E_INPUT_OPER_NULL;		goto L_RETU;	}	if(amtcmp(rPack->damt0,0)<=0)	{		*pRetCode=E_INPUT_AMT;		goto L_RETU;	}	des2src(tSubsidy.summary,rPack->semail);		//补助摘要	if(strlen(rPack->semail)<1)	{		*pRetCode=E_INPUT_SUMMARY;		goto L_RETU;	}	des2src(tSubsidy.batch_no,rPack->scust_limit);	tSubsidy.bill_type=rPack->lvol2;					//票据类型	des2src(tSubsidy.bill_no,rPack->scust_auth2);	//票据号码	tSubsidy.amount=rPack->damt0;				//补助金额	des2src(tSubsidy.subsidytype,rPack->smain_flag);//补助标志(0增值1减值)	des2src(tSubsidy.subsidytype,"1");			//补助标志(0增值1减值)	des2src(tSubsidy.broker_id,rPack->sname);		//经办人身份证号	des2src(tSubsidy.broker_name,rPack->semail2);	//经办人姓名	IA.dArrInAmt[0]=tradeserial.trade_fee;	switch(tSubsidy.bill_type)	{		case TYPE_CASH:	//现金			IA.iArrInFeeSwitch[1]=1;			break;		case TYPE_BILL:	//支票			IA.iArrInFeeSwitch[2]=1;			break;		case TYPE_FUNDBOOK:	//经费本			IA.iArrInFeeSwitch[3]=1;			break;		default:			*pRetCode=E_INPUT_DEPOSIT_TYPE;			goto L_RETU;	}	ret=stat_subsidy_amount_by_batch_no(tSubsidy.batch_no, &iTotalCnt,&dTotalAmt);	if(ret)	{		*pRetCode = ret;		writelog(LOG_ERR,"ret[%d]",ret);		goto L_RETU;	}	if(iTotalCnt!=rPack->lvol3)	{		strcpy(szMsg,"补助人数与导入的数据不符");		*pRetCode=E_INPUT_DATA_INVAILD;		goto L_RETU;	}	if(amtcmp(dTotalAmt,rPack->damt0)!=0)	{		strcpy(szMsg,"补助总金额与导入的补助数据不符");		*pRetCode=E_INPUT_DATA_INVAILD;		goto L_RETU;	}	// writelog(LOG_DEBUG,"subsidy no : %s",tSubsidy.batch_no);//.........这里部分代码省略.........

//系统正式入账 int enter_account(ST_PACK *in_pack,InAcc *IA,ST_PACK *out_pack){	int ret = 0;	int i=0;	int	card_id = 0;	char logicdate[11]="";	char sysdate[11]="";	char systime[9]="";	char sMsg[256]="";		T_t_tif_tradeserial tradeserial;	T_t_cif_customer 	tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_aif_account	tAccount;	T_t_pif_card	tCard;	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&tAccount,0,sizeof(tAccount));	memset(&tCard,0,sizeof(tCard));	card_id=in_pack->lvol0;		ret=get_datetime_from_db(sysdate,systime);	if(ret)	{		writelog(LOG_ERR,"get_datetime_from_db error,error code=[%d]",ret);		getsysdate(sysdate);		getsystime(systime);		return ret;	}	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		writelog(LOG_ERR,"GetLogicDate error,errcode=[%d]",ret);		return ret;	}	ret=DB_t_pif_card_read_by_card_id(card_id, &tCard);	if(ret)	{		if(DB_NOTFOUND==ret)			ret=E_CARDNO_NOT_EXIST;		else			ret=E_DB_CARD_R;		return ret;	}	if(strncmp(tCard.state_id,CARDSTAT_REG,4)!=0)	{		if('2'==tCard.state_id[CARDSTAT_TYPE_REG])			ret= E_CARDNO_LOGOUT;		else if('3'==tCard.state_id[CARDSTAT_TYPE_REG])			ret = E_CARD_CHANGE;		else if(tCard.state_id[CARDSTAT_TYPE_LOST]==STATE_TRUE)			ret=E_CARDNO_LOST;		else if(tCard.state_id[CARDSTAT_TYPE_FREEZE]==STATE_TRUE)			ret=E_CARDNO_FREEZE;		else if(tCard.state_id[CARDSTAT_TYPE_WFAIL]==STATE_TRUE)			ret=E_CARDNO_WFAIL;		return ret;	}		//根据卡号和钱包号得到消费者账号(借方)	ret=DB_t_aif_account_read_by_card_id_and_purse_id(card_id, PURSE_NO_ONE,&tAccount);	if(ret)	{		writelog(LOG_ERR,"DB_t_aif_account_read_by_card_id_and_purse_id ret[%d]card_id[%d]",ret,card_id);		if(DB_NOTFOUND==ret)			ret=E_ACTNO_NOT_EXIST;		else			ret=E_DB_ACCOUNT_R;		return ret;	}		ret=DB_t_cif_customer_read_lock_by_cur_and_cut_id(tCard.cosumer_id, &tCustomer);	if(ret)	{		writelog(LOG_ERR,"cut_id[%d]",tCard.cosumer_id);		if(DB_NOTFOUND==ret)			ret= E_CUSTOMER_NOT_EXIST;		else			ret= E_DB_CUSTOMER_R;		return ret;	}	//得到收费类别	if(0==tCustomer.fee_type)	{		ret=DB_t_pif_spefee_read_by_dept_code_and_cut_type(tCustomer.classdept_no, tCustomer.cut_type,&tSpeFee);		if(ret)		{			if(DB_NOTFOUND==ret)			{				tCustomer.fee_type=tCustomer.cut_type;			}			else			{//.........这里部分代码省略.........

int F847107(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int i=0;	int ret =0;	char logicdate[11]="";										//业务日期	char sysdate[11]="";	char systime[9]="";	int cardno=0;	char sMsg[256]="";	char cardphyid[41]="";	T_t_tif_tradeserial  tradeserial;	T_t_card		tCard;	T_t_tif_savdtl tSavdtl;	T_t_customer tCustomer;	T_t_spefee 	tSpeFee;	T_t_aif_account	tAccount;		//帐户表	InAcc	IA;	double dSerialNo = 0;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	*pRetCode=0;	memset(&tCard,0,sizeof(tCard));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&IA,0,sizeof(IA));	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&tAccount,0,sizeof(tAccount));	memset(&tradeserial,0,sizeof(tradeserial));	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_LSERIAL1,F_DAMT2,F_VSMESS,0);	cardno=rPack->lvol0;	des2src(cardphyid, rPack->sbank_acc);				//物理卡号	if(amtcmp(rPack->damt0,0)<=0)	{		*pRetCode=E_INPUT_AMT;		goto L_RETU;	}	if(amtcmp(rPack->damt1,0)<0)	{		*pRetCode=E_INPUT_CARD_BALA;		goto L_RETU;	}	if(rPack->lvol10<1)	{		*pRetCode=E_INPUT_CARD_TXCNT;		goto L_RETU;	}	if(amtcmp(rPack->damt1,rPack->damt0)<0)	{		writelog(LOG_ERR,"tCard balance[%lf] amount[%lf]",rPack->damt1,rPack->damt0);		*pRetCode= E_BALANCE_SHORTAGE;		goto L_RETU;	}	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	ret=DB_t_card_read_by_cardno(cardno, &tCard);	if(ret)	{		if(DB_NOTFOUND==ret)			*pRetCode=E_CARDNO_NOT_EXIST;		else			*pRetCode=E_DB_CARD_R;		goto L_RETU;	}	if(strncmp(tCard.cardattr,CARDSTAT_REG,4)!=0)	{		if('2'==tCard.cardattr[CARDSTAT_TYPE_REG])			*pRetCode = E_CARD_CLOSE;		else if('3'==tCard.cardattr[CARDSTAT_TYPE_REG])			*pRetCode = E_CARD_CHANGE;		else if(tCard.cardattr[CARDSTAT_TYPE_LOST]==STATE_TRUE)			*pRetCode=E_CARD_LOST;		else if(tCard.cardattr[CARDSTAT_TYPE_FREEZE]==STATE_TRUE)			*pRetCode=E_CARD_FREEZE;		else if(tCard.cardattr[CARDSTAT_TYPE_WFAIL]==STATE_TRUE)			*pRetCode=E_CARDNO_WFAIL;		goto L_RETU;	}	trim(cardphyid);	trim(tCard.cardphyid);	if(strcmp(tCard.cardphyid,cardphyid)!=0)	{		writelog(LOG_ERR,"db cardphyid[%s],input cardphyid[%s]",tCard.cardphyid,cardphyid);		*pRetCode= E_CARD_PHYNO_DIFFER;		goto L_RETU;	}	tradeserial.trade_fee = rPack->damt0;													//支取金额	ret=DB_t_aif_account_read_by_cardno_and_purseno(cardno,PURSE_NO_ONE,&tAccount);	if(ret)//.........这里部分代码省略.........

int F847116(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int	hi_cutid = 0;											//客户ID	int	hi_cuttype = 0;										//客户类型	int i=0;	int ret = 0;	int len = 0;	char h_showcardid[11] = "";								//显示卡号	char h_password[7] = "";									//卡密码	double h_temp_Card_id = 0;								//卡号	char seed_key[17] = "";									//种子密钥	char card_endtime[27 + 1] = "";							//卡的有效截至日期	char logicdate[11]="";	char sysdate[11]="";	char systime[9]="";	char sMsg[256]="";	char sMaxCardBalance[20]="";	double dMaxCardBalance=0;	T_t_cif_customer tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_pif_card tCard;	T_t_aif_account  tAccount;	T_t_tif_tradeserial  tradeserial;	InAcc	IA;	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_LVOL0,F_LVOL1,F_LVOL5,				F_SCUST_NO,	F_SCUST_NO2,F_SCUST_AUTH,F_SCUST_AUTH2,				F_SDATE0,F_SNAME,F_SNAME2,				F_SOPEN_EMP,F_SSTATUS0,				F_DAMT2,F_DAMT3,F_LSERIAL1,F_VSMESS,0);	memset(&IA,0,sizeof(IA));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tCard, 0, sizeof(tCard));	memset(&tAccount,0,sizeof(tAccount));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&tSpeFee,0,sizeof(tSpeFee));#ifdef DEBUG	writelog(LOG_DEBUG,"rPack->damt0[%lf]",rPack->damt0);	writelog(LOG_DEBUG,"rPack->scust_auth2[%s]",rPack->scust_auth2);#endif	hi_cutid = rPack->lvol0;									//客户ID	hi_cuttype = rPack->lvol3;									//客户类别	tradeserial.trade_fee=rPack->damt0;					//发生额	des2src(h_showcardid,rPack->scust_no);					//显示卡号	getsysdate(sysdate);	getsystime(systime);	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=ret;		goto L_RETU;	}	ret=IsExistShowCardNo(h_showcardid);	if(ret)	{		*pRetCode = ret;		goto L_RETU;	}	//	检查客户信息，判断是否可以发行临时卡	ret = IsExistNoLostCardByCustomId(hi_cutid);	if (ret)	{		writelog(LOG_ERR,"hi_cutid[%d]",hi_cutid);		*pRetCode = ret;		goto L_RETU;	}	des2src(tCard.physical_no, rPack->sbank_acc);				//物理卡号	ret=IsExistCardByPhyCardNo(tCard.physical_no);			//物理卡号	if(ret)	{		writelog(LOG_ERR,"physical_no[%s]",tCard.physical_no);		*pRetCode = ret;		goto L_RETU;	}	ret=DB_t_cif_customer_read_lock_by_cur_and_cut_id(hi_cutid, &tCustomer);	if(ret)	{		writelog(LOG_ERR,"cut_id[%d]",hi_cutid);		if(DB_NOTFOUND==ret)			*pRetCode= E_CUSTOMER_NOT_EXIST;		else			*pRetCode= E_DB_CUSTOMER_R;		goto L_RETU;	}	//得到收费类别	if(tCustomer.fee_type<1)	{		ret=DB_t_pif_spefee_read_by_dept_code_and_cut_type(tCustomer.classdept_no, tCustomer.cut_type,&tSpeFee);		if(ret)		{			if(DB_NOTFOUND==ret)			{//.........这里部分代码省略.........

//.........这里部分代码省略.........		if(tEAcc.stoppayflag[0] == '1')			return E_EACC_STOPPAY;		if(amtcmp(tEAcc.cur_freebala , rPack->damt0) <0)   //金额不足			return E_EACC_BALANCE_SHORTAGE;		ret=GetParameter(GLOBE_MAXCARDBALANCE,sMaxBalance);		if(ret)			return ret;		dMaxCardBalance=atof(sMaxBalance);		if(amtcmp(tCardAccount.cur_bala+tradeserial.trade_fee,dMaxCardBalance)>0)			return E_AMT_EXCEED_MAX;//		tradeserial.in_balance=rPack->damt1;			//卡上余额//		tradeserial.trade_count=rPack->lvol6+1;		//交易次数			}	else	{		tradeserial.serial_type = TXCODE_CARD2EACC;		strcpy(seedkey,STATIC_SEED_KEY);		des2src(inpwd_plain,rPack->scust_limit2);		EncodePwd(seedkey,inpwd_plain,inpwd_crypt,0);		if(strcmp(tCardAccount.password,inpwd_crypt)!=0)			return E_CARD_PWD_DIFFER;		if(amtcmp(tCardAccount.cur_freebala , rPack->damt0) <0)   //金额不足			return E_EACC_BALANCE_SHORTAGE;					ret=GetParameter(GLOBE_MAXEACCBALANCE,sMaxBalance);		if(ret)			return ret;		dMaxEACCBalance=atof(sMaxBalance);		if(amtcmp(tEAcc.cur_bala+tradeserial.trade_fee,dMaxEACCBalance)>0)			return E_AMT_EXCEED_MAX;		//		tradeserial.in_balance=tEAcc.cur_freebala;//		tradeserial.trade_count=tEAcc.consume_count+1;		//交易次数	}	ret=GetLogicDate(logicdate);							//业务日期	if(ret)		return ret;		double dSerialNo = 0;	ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&dSerialNo);  					//获得最大流水号	if(ret)	{		writelog(LOG_ERR," getNewUniqNo ERRCODE = [%d]",ret);		return ret;	}	tradeserial.serial_no = D2I(dSerialNo);											//流水号	tradeserial.other_seri_no = 0;															//上传端流水号	tradeserial.serial_state = SERISTAT_DEBT;												//流水状态	des2src(tradeserial.operate_date,sysdate);											//发生日期	des2src(tradeserial.operate_time,systime);											//发生时间	des2src(tradeserial.collect_date,sysdate);												//采集日期	des2src(tradeserial.collect_time,systime);												//采集时间	des2src(tradeserial.enteract_date,logicdate);											//处理日期	des2src(tradeserial.enteract_time,systime);											//处理时间	des2src(tradeserial.oper_code, rPack->sname);	tradeserial.customer_id = tCustomer.cut_id;	tradeserial.sys_id = 0;																//外部系统标识	tradeserial.in_balance=rPack->lvol7/100.0;	tradeserial.trade_count=rPack->lvol6+1;		//交易次数	des2src(IA.sArrInActno[0],tCardAccount.account_id);						//卡帐户	des2src(IA.sArrInActno[5],tEAcc.account_id);						//电子钱包帐户	IA.iCardNo=tEAcc.card_id;	IA.dArrInAmt[0]=tradeserial.trade_fee;	ret=process(&IA,&tradeserial);	if(ret)	{		writelog(LOG_ERR,"process ret[%d]",ret);		return ret;	}		if(TXCODE_CARD2EACC==tradeserial.serial_type)		sprintf(outPack->vsmess,"卡转电子钱包:转帐前卡余额%.2lf元,转账金额%.2lf,当前卡余额%.2lf元",tradeserial.in_balance,tradeserial.trade_fee,tradeserial.out_balance);	else		sprintf(outPack->vsmess,"电子钱包转卡:转帐前卡余额%.2lf元,转账金额%.2lf,当前卡余额%.2lf元",tradeserial.in_balance,tradeserial.trade_fee,tradeserial.out_balance);	writelog(LOG_DEBUG,outPack->vsmess);	ret = DB_t_tif_tradeserial_add(&tradeserial);	if (ret)	{		writelog(LOG_ERR,"ret[%d]",ret);		if(DB_REPEAT==ret)			return E_DB_TRADESERIAL_E;		else			return E_DB_TRADESERIAL_I;	}	if(amtcmp(tradeserial.out_balance,0)<0)		return E_ENTER_ACCOUNT;	SetCol(handle,F_DAMT2,F_LSERIAL1,F_VSMESS,0);			outPack->damt2=tradeserial.out_balance;		//出卡值	outPack->lserial1=tradeserial.serial_no;			//流水号	PutRow(handle,outPack,pRetCode,szMsg);	return 0;}

//圈存机写卡失败冲正(实际并不冲正，只是改写卡状态)int Pos_WriteErrCard(INNER_TRANS_REQUEST * pNode){	int ret = 0;	int card_id = 0;	char logicdate[11]="";	int serial_no=0;	T_t_pif_card  card;	T_t_tif_tradeserial tradeserial;	INNER_TRANS_REQUEST from_pos;	memset(&tradeserial,0,sizeof(tradeserial));	memset(&from_pos,0,sizeof(from_pos));	memset(&card,0,sizeof(card));	memcpy(&from_pos,pNode,sizeof(from_pos));	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		db_chk_err(__FILE__,__LINE__,&sqlca);		writelog(LOG_ALERT,"GetLogicDate err,sqlcode[%d]",ret);		return E_TRANS_UNKNOW_ERROR;	}	serial_no=from_pos.RecvNo;	ret=DB_t_tif_tradeserial_read_by_serial_no(serial_no,&tradeserial);	if(ret)	{		db_chk_err(__FILE__,__LINE__,&sqlca);		writelog(LOG_ALERT,"DB_t_tif_tradeserial_read_by_serial_no err,sqlcode[%d]",ret);		return E_TRANS_UNKNOW_ERROR;	}	//修改原卡状态为发卡写卡失败状态	card_id = tradeserial.card_id;	ret=DB_t_pif_card_read_lock_by_cur_and_card_id(card_id, &card);	if(ret)	{		db_chk_err(__FILE__,__LINE__,&sqlca);		writelog(LOG_ALERT,"DB_t_pif_card_read_lock_by_cur_and_card_id err,sqlcode[%d]",ret);		return E_TRANS_UNKNOW_ERROR;	}	card.state_id[CARDSTAT_TYPE_WFAIL]=STATE_TRUE;	memset(card.comments,0,sizeof(card.comments));	AddXmlItemStr(card.comments, XML_KEY_OPERATEDATE,logicdate);	AddXmlItemInt(card.comments,XML_KEY_SERIALNO,serial_no);	AddXmlItemInt(card.comments,XML_KEY_TRADECODE,TRADE_INNER_TRANS);	ret=DB_t_pif_card_update_lock_by_cur(&card);	if(ret)	{		db_chk_err(__FILE__,__LINE__,&sqlca);		writelog(LOG_ALERT,"DB_t_pif_card_update_lock_by_cur err,sqlcode[%d]",ret);		return E_TRANS_UNKNOW_ERROR;	}	DB_t_pif_card_free_lock_by_cur();	writelog(LOG_INFO,"update card status succeed!");	return 0;}

//.........这里部分代码省略.........        }        else        {            *pRetCode = E_DB_CUSTOMER_R;        }        goto L_RETU;    }    //读取个人帐户    ret = DB_t_aif_account_read_by_cardno_and_purseno(tCard.cardno,PURSE_NO_ONE,&tAccount);    if (ret)    {        if (DB_NOTFOUND == ret)        {            *pRetCode = E_DB_ACCOUNT_N;        }        else        {            *pRetCode = E_DB_ACCOUNT_R;        }        goto L_RETU;    }    //个人临时帐户填死掉了, 不需要查询    ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&dUniqNo);              // 获得最大流水号    if (ret)    {        writelog(LOG_ERR,"ret[%d]",ret);        *pRetCode = ret;		goto L_RETU;    }    getsysdate(sysdate);    getsystime(systime);    GetLogicDate(logicdate);    memset(&tSerial, 0, sizeof tSerial);    tSerial.serial_no = D2I(dUniqNo);    tSerial.other_seri_no = 0;    tSerial.serial_state = SERISTAT_DEBT;                           //流水状态    tSerial.serial_type = TXCODE_CONSUME;                           //交易类型    des2src(tSerial.operate_date,sysdate);                           //发生日期    des2src(tSerial.operate_time,systime);                           //发生时间    des2src(tSerial.collect_date,sysdate);                           //采集日期    des2src(tSerial.collect_time,systime);                           //采集时间    des2src(tSerial.enteract_date,logicdate);                        //处理日期    des2src(tSerial.enteract_time,systime);                          //处理时间//    tSerial.maindeviceid = rPack->lvol3;                            //上传工作站标识    tSerial.deviceid = 0;                                          //采集设备标识     tSerial.cardno = hi_cardid;                                    //交易卡号    des2src(tSerial.showid,tCard.showid);                           //显示卡号    tSerial.purseno = PURSE_NO_ONE;                                //钱包号    tSerial.custid = tCard.custid;                         //客户号    des2src(tSerial.opercode, rPack->scust_no);                      //操作员代码    tSerial.sysid = 0;    tSerial.trade_count = rPack->lvol4 + 1;                          //卡交易次数    tSerial.trade_fee = transfer_price;                             //转钱金额    tSerial.cardbefbal = cardbefbal;                                //入卡值    writelog(LOG_DEBUG,"水控转账入卡值[%.2lf]",cardbefbal);    des2src(IA.sArrInActno[0],tAccount.account_id);                 //个人帐户//  des2src(IA.sArrInActno[1],temp_account_id);                  //个人临时帐户    IA.dArrInAmt[0] = tSerial.trade_fee;                            //交易金额    IA.iCardNo = tCard.cardno;                                     //交易卡号    IA.iFeeType = tCustomer.feetype;                               //客户收费类型    //调用入帐子模块    ret = process(&IA,&tSerial);

int F847302(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){    int ret = 0;    T_t_card tCard;    T_t_tif_tradeserial tTradeSerial, tPacketSerial;    T_t_tif_writefailed tWriteFailed;    char logicdate[11] = "";    double dUniqNo = 0;         memset(&tCard, 0, sizeof tCard);    memset(&tTradeSerial, 0, sizeof tTradeSerial);    memset(&tPacketSerial, 0, sizeof tPacketSerial);    memset(&tWriteFailed, 0, sizeof tWriteFailed);        if (rPack->lvol3 != 0 && rPack->lvol3 != 1)    {        writelog(LOG_DEBUG,"输入标志错误[%d]",rPack->lvol3);        *pRetCode = E_INPUT_ERROR;        goto L_RETU;    }    ret = DB_t_tif_tradeserial_read_by_serial_no(rPack->lvol1,&tTradeSerial);  //消费流水号    if (ret)    {        writelog(LOG_DEBUG,"输入号不存在消费流水号[%d]",rPack->lvol1);        if (DB_NOTFOUND == ret)        {            *pRetCode = E_DB_TRADESERIAL_N;        }        else        {            *pRetCode = E_DB_TRADESERIAL_R;        }        goto L_RETU;    }        ret = DB_t_card_read_lock_by_cur_and_cardno(tTradeSerial.cardno,&tCard);    if (ret)    {        if (DB_NOTFOUND == ret)        {            *pRetCode = E_DB_CARD_N;        }        else        {            *pRetCode = E_DB_CARD_R;        }        goto L_RETU;    }        ret = DB_t_tif_tradeserial_read_by_serial_no(rPack->lvol2,&tPacketSerial); //充值流水号    if (ret)    {        writelog(LOG_DEBUG,"输入号不存在充值流水号[%d]",rPack->lvol2);        if (DB_NOTFOUND == ret)        {            *pRetCode = E_DB_TRADESERIAL_N;        }        else        {               *pRetCode = E_DB_TRADESERIAL_R;        }        goto L_RETU;    }    GetLogicDate(logicdate);    tWriteFailed.cardno = tCard.cardno;    des2src(tWriteFailed.tx_date,logicdate);    writelog(LOG_DEBUG,"大钱包交易金额[%f]",tTradeSerial.trade_fee);        // 大钱包写卡失败    if (0 == rPack->lvol3)    {        // 大钱包写卡失败        ret = getNewUniqNo(KEYTYPE_WRITEFAILED, &dUniqNo);              //获得写卡失败表最大ID号        if (ret)        {            writelog(LOG_ERR,"ret[%d]",ret);            *pRetCode = ret;            goto L_RETU;        }        tWriteFailed.id = D2I(dUniqNo);        tWriteFailed.serial_no = tTradeSerial.serial_no;        tWriteFailed.serial_type = tTradeSerial.serial_type;        tWriteFailed.purese_no = PURSE_NO_ONE;        tWriteFailed.deal_flag[0] = CARDWFAIL_PACKET_DEAL_FLAG_Y;        tWriteFailed.deal_bala = tTradeSerial.trade_fee;        des2src(tWriteFailed.comments, "大钱包写卡失败");        ret = DB_t_tif_writefailed_add(&tWriteFailed);        if (ret)        {            *pRetCode = E_DB_WRITEFAILED_I;            goto L_RETU;        }            }    tCard.cardattr[CARDSTAT_TYPE_WFAIL] = STATE_TRUE;    ret = DB_t_card_update_lock_by_cur(&tCard);    if (ret)    {        *pRetCode = E_DB_CARD_U;         goto L_RETU;//.........这里部分代码省略.........

//冲正int ReverseProcess(RevAcc * revacc)			{	int ret = -1;	int rows = 0;	char sTxdate[9] = "";		//char *pMessage = (char*) revacc->pVoidPointer;	T_t_tif_tradelog tTradelog;	T_t_tif_tradelog_his tTradeloghis;	memset(&tTradelog,0,sizeof tTradelog);	memset(&tTradeloghis,0,sizeof tTradeloghis);	GetLogicDate(sTxdate);	if(strcmp(revacc->sTxAccDate,sTxdate) == 0)		//查当前账务表	{		ret = DB_t_tif_tradelog_open_select_by_c2_and_serino_and_seri_type_and_outorin(revacc->iSerialNo, revacc->iTradeNo, DBCR_DEBIT);		if(ret)		{			if(DB_NOTFOUND == ret)				return  E_FAN_SERIAL_NOT_EXISTS;			else				return E_DB_TRADELOG_R;		}		while(1)		{			memset(&tTradelog,0,sizeof tTradelog);			ret = DB_t_tif_tradelog_fetch_select_by_c2(&tTradelog);			if(ret)			{				if(DB_NOTFOUND == ret)				{					if(rows > 0)						break;					else						return E_FAN_SERIAL_NOT_EXISTS;				}				else					return E_DB_TRADELOG_R;			}			rows++;			ret = do_reverse_balance(&tTradelog,revacc);			if(ret)			{				DB_t_tif_tradelog_close_select_by_c2();				return ret;			}					}		DB_t_tif_tradelog_close_select_by_c2();	}	else 			// 查历史账务表	{							ret =  DB_t_tif_tradelog_his_open_select_by_c0_and_bak_date_and_serino_and_outorin(revacc->sTxAccDate, revacc->iSerialNo,DBCR_DEBIT );					if(ret)		{			if(DB_NOTFOUND == ret)				return  E_FAN_SERIAL_NOT_EXISTS;			else				return E_DB_TRADELOG_R;		}		while(1)		{			memset(&tTradelog,0,sizeof tTradelog);			ret = DB_t_tif_tradelog_his_fetch_select_by_c0(&tTradeloghis);			if(ret)			{				if(DB_NOTFOUND == ret)				{					if(rows > 0)						break;					else						return E_FAN_SERIAL_NOT_EXISTS;				}				else					return E_DB_TRADELOG_R;			}			rows++;			tTradelog.fee_type = tTradeloghis.fee_type;			des2src(tTradelog.act_id,tTradeloghis.act_id);			des2src(tTradelog.subno,tTradeloghis.subno);			des2src(tTradelog.other_actid,tTradeloghis.other_actid);			des2src(tTradelog.other_subno,tTradeloghis.other_subno);			tTradelog.outorin= tTradeloghis.outorin;			tTradelog.op_fee= tTradeloghis.op_fee;			tTradelog.new_fee = tTradeloghis.new_fee;			tTradelog.cur_frozebala= tTradeloghis.cur_frozebala;			tTradelog.annex= tTradeloghis.annex;			des2src(tTradelog.comments,tTradeloghis.comments);			ret = do_reverse_balance(&tTradelog,revacc);			if(ret)			{				DB_t_tif_tradelog_his_close_select_by_c0();				return ret;			}					}		DB_t_tif_tradelog_his_close_select_by_c0();	}//.........这里部分代码省略.........

int F240002(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg){	int ret=0;	double unique=0;	int temp_serial_no=0;	char logicdate[11]="";	char buffer[16]="";	int i=0;	double trans_amt=0.0;	char sMsg[255]="";	char sDebugMsg[255]="";	char sMaxCardBalance[20]="";	double dMaxCardBalance=0;	T_t_aif_account	tAccount;		//帐户表	T_t_cif_customer	tCustomer;	T_t_pif_spefee 	tSpeFee;	T_t_tif_tradeserial  tradeserial;		//卡操作流水表	T_t_pif_card		card;	InAcc	IA;	memset(&tSpeFee,0,sizeof(tSpeFee));	memset(&tCustomer,0,sizeof(tCustomer));	memset(&tAccount,0,sizeof(tAccount));	memset(&IA,0,sizeof(IA));	memset(&tradeserial,0,sizeof(tradeserial));	memset(&card,0,sizeof(card));	ST_CPACK aPack;	ST_PACK *out_pack = &(aPack.pack);	ResetNormalCPack(&aPack,0,1);	SetCol(handle,0);	SetCol(handle,F_DAMT0,F_DAMT1,F_DAMT2,F_LVOL1,F_LVOL2,F_SBANK_CODE,F_SEMP_NO,0);	//memset(&tradeserial_bak,0,sizeof(tradeserial_bak));	ret=GetLogicDate(logicdate);								//业务日期	if(ret)	{		*pRetCode=E_TRANS_UNKNOW_ERROR;		writelog(LOG_ERR,"GetLogicDate error,errcode=[%d]",ret);		goto L_RETU;	}	//判断设备是否登陆	if(0!=device_login_yes_or_no(atoi(rPack->sorder2)))	{		*pRetCode=E_TRANS_TERM_NOLOGIN;		writelog(LOG_ERR,"Device don't login");		goto L_RETU;	}	//判断是否处于日终结算状态 	ret=GetParameter(GLOBE_FLAG_BALANCE,buffer);	if(ret)	{		*pRetCode=E_TRANS_UNKNOW_ERROR;		writelog(LOG_ERR,"GetParameter error,errcode=[%d]",ret);		goto L_RETU;	}	else if(strncmp(buffer,"0",1)!=0)	{		*pRetCode=E_TRANS_BANK_SERVICE_NOEXIT;		writelog(LOG_ERR,"System is balance now!");		goto L_RETU;	}	ret=DB_t_pif_card_read_by_card_id(atoi(rPack->sserial0),&card);	if(ret)	{		*pRetCode=E_TRANS_SCHACC_NOEXIT;		writelog(LOG_ERR,"Create serial_no error,error code=[%d]",ret);		goto L_RETU;	}	if(strncmp(card.state_id,CARDSTAT_LOGOUT,4)==0)	{		*pRetCode=E_TRANS_SCHACC_DESTORY;		writelog(LOG_ERR,"card.state_id=[%d]",card.card_id);		goto L_RETU;	}	if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_LOST])	{		DB_t_pif_card_free_lock_by_cur();		*pRetCode=E_TRANS_SCHCARD_LOSTING;		writelog(LOG_ERR,"card_state=[%s]",card.state_id);		goto L_RETU;	}	if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_FREEZE])	{		DB_t_pif_card_free_lock_by_cur();		*pRetCode=E_TRANS_SCHCARD_FREEZE;//.........这里部分代码省略.........