这篇教程C++ HAL_SYSTICK_IRQHandler函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中HAL_SYSTICK_IRQHandler函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_SYSTICK_IRQHandler函数的具体用法？C++ HAL_SYSTICK_IRQHandler怎么用？C++ HAL_SYSTICK_IRQHandler使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了HAL_SYSTICK_IRQHandler函数的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: SysTick_Handler/*** @brief This function handles System tick timer.*/void SysTick_Handler(void){ /* USER CODE BEGIN SysTick_IRQn 0 */// SEGGER_SYSVIEW_RecordEnterISR(); /* USER CODE END SysTick_IRQn 0 */ HAL_IncTick(); HAL_SYSTICK_IRQHandler(); /* USER CODE BEGIN SysTick_IRQn 1 */// SEGGER_SYSVIEW_RecordEnterISR(); /* USER CODE END SysTick_IRQn 1 */}
开发者ID:librespacefoundation，项目名称:upsat-adcs-software，代码行数:14，
示例2: SysTick_Handler/*** @brief This function handles System tick timer.*/void SysTick_Handler(void){ /* USER CODE BEGIN SysTick_IRQn 0 */ /* USER CODE END SysTick_IRQn 0 */ HAL_IncTick(); HAL_SYSTICK_IRQHandler(); /* USER CODE BEGIN SysTick_IRQn 1 */ /* USER CODE END SysTick_IRQn 1 */}
开发者ID:94onur94，项目名称:STM32，代码行数:14，
示例3: SysTick_Handler/*** @brief This function handles System tick timer.*/void SysTick_Handler(void){ /* USER CODE BEGIN SysTick_IRQn 0 */ /* USER CODE END SysTick_IRQn 0 */ HAL_IncTick(); HAL_SYSTICK_IRQHandler(); /* USER CODE BEGIN SysTick_IRQn 1 */// HAL_GPIO_TogglePin(USB_CON_GPIO_Port, USB_CON_Pin); /* USER CODE END SysTick_IRQn 1 */}
开发者ID:assarsh，项目名称:Project_2016_04，代码行数:14，
示例4: SysTick_Handler//System Timer, 1ms ISRvoid SysTick_Handler(void){ // Decrement to zero the counter used by the delay routine. if(timer_delayCount != 0u) { --timer_delayCount; } //For USB delays: HAL_IncTick(); HAL_SYSTICK_IRQHandler();}
开发者ID:unixjet，项目名称:FlexSEA，代码行数:13，
示例5: SysTick_Handler/*** @brief This function handles System tick timer.*/void SysTick_Handler(void){ /* USER CODE BEGIN SysTick_IRQn 0 */ /* USER CODE END SysTick_IRQn 0 */ HAL_IncTick(); HAL_SYSTICK_IRQHandler(); emfat_request_time++; /* USER CODE BEGIN SysTick_IRQn 1 */ /* USER CODE END SysTick_IRQn 1 */}
开发者ID:12019，项目名称:USB_Photoframe，代码行数:15，
示例6: SysTick_Handler/** * @brief This function handles System tick timer. */void SysTick_Handler(void) { HAL_IncTick(); HAL_SYSTICK_IRQHandler(); static uint_fast16_t counter = 0; counter++; if (counter & 8) { DIO8_InputDebounce(); } if (counter > 999) { counter = 0; NewSecond = 1; UnixTimestamp++; }}
开发者ID:Hoernchen20，项目名称:can-ha-dio8，代码行数:20，
示例7: SysTick_Handler/*** @brief This function handles System tick timer.*/void SysTick_Handler(void){ /* USER CODE BEGIN SysTick_IRQn 0 */ /* USER CODE END SysTick_IRQn 0 */ HAL_IncTick(); HAL_SYSTICK_IRQHandler(); /* USER CODE BEGIN SysTick_IRQn 1 */#ifdef USE_STM32F4_EMWIN// OS_TimeMS++; // EmWin Ticks#endif#ifdef USE_STM32F4_AUDIO /* Test on the command: Recording */ if (CmdIndex == CMD_RECORD) { /* Increments the time recording base variable */ TimeRecBase ++; }#endif /* USER CODE END SysTick_IRQn 1 */}
开发者ID:bhavindarji，项目名称:STM32F4-Dev，代码行数:26，
示例8: SysTick_Handler/** * @brief This function handles SysTick Handler. * @param None * @retval None */void SysTick_Handler(void){ HAL_SYSTICK_IRQHandler();}
开发者ID:nidhiyanandh，项目名称:STM32Cube_FW_F4_V1.5.0_GCC_Makefile，代码行数:9，
示例9: main//.........这里部分代码省略......... current3 = adc_read(battery3.i_adc_chan); voltage3 = adc_read(battery3.v_adc_chan); props_bat3.i_adc_val = props_bat3.i_adc_val + current3; props_bat3.v_adc_val = props_bat3.v_adc_val + voltage3; /* Over-current protection */ if(current3>3950 || current3<100) { u8_oc3++; if(u8_oc3 > 15) { conv_init(battery3); bat_stat3 = OVERCURRENT; } } else { u8_oc3 = 0; } i3++;#endif#ifdef BAT2 /* Second battery */ if(TimeCounter4>=5) // 4ms, ie 2 periods of 500Hz sine wave { switch(bat_stat4) { case DISCHARGE: bat_stat4 = discharge_main(battery4, &props_bat4, &restStartms4, i4, bat_stat4); break; case CC: bat_stat4 = chg_ctrl(battery4, &props_bat4, i4, i4_origin); break; case CV: bat_stat4 = cv_main(battery4, &props_bat4, &restStartms4, i4, i4_origin, bat_stat4); break; case FULL: if(HAL_GetTick() - restStartms4 >= REST) { props_bat4.i_adc_val = 0; props_bat4.v_adc_val = 0; props_bat4.adc_val_old = adc_read(battery4.i_adc_chan); bat_stat4 = DISCHARGE; } break; case LVDC: if(HAL_GetTick() - restStartms4 >= REST) { props_bat4.i_adc_val = 0; props_bat4.v_adc_val = 0; props_bat4.adc_val_old = adc_read(battery4.i_adc_chan); bat_stat4 = CC; } break; case OK: props_bat4.i_adc_val = 0; // normally reset in d/chg func, but not used so reset here props_bat4.v_adc_val = 0; // normally reset in d/chg func, but not used so reset here bat_stat4 = CC; break; case OVERCURRENT: bat_stat4 = OVERCURRENT; break; default: bat_stat4 = OK; break; } TimeCounter4 = 0; i4 = 0; } /* Update ADC readings */ current4 = adc_read(battery4.i_adc_chan); voltage4 = adc_read(battery4.v_adc_chan); props_bat4.i_adc_val = props_bat4.i_adc_val + current4; props_bat4.v_adc_val = props_bat4.v_adc_val + voltage4; /* Over-current protection */ if(current4>3950 || current4<100) { u8_oc4++; if(u8_oc4 > 15) { conv_init(battery4); bat_stat4 = OVERCURRENT; } } else { u8_oc4 = 0; } i4++;#endif HAL_SYSTICK_IRQHandler(); }}
开发者ID:awdensmore，项目名称:bat-ager，代码行数:101，
示例10: SysTick_Handlervoid SysTick_Handler(void){ HAL_IncTick(); HAL_SYSTICK_IRQHandler(); sysTick++;}
开发者ID:zaba848，项目名称:FlyControll，代码行数:6，
注：本文中的HAL_SYSTICK_IRQHandler函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ HAL_TIMEx_MasterConfigSynchronization函数代码示例
C++ HAL_SYSTICK_Config函数代码示例 |
