这篇教程C++ GPIO_PDD_GetPortDataOutput函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中GPIO_PDD_GetPortDataOutput函数的典型用法代码示例。如果您正苦于以下问题：C++ GPIO_PDD_GetPortDataOutput函数的具体用法？C++ GPIO_PDD_GetPortDataOutput怎么用？C++ GPIO_PDD_GetPortDataOutput使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了GPIO_PDD_GetPortDataOutput函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: GPIO2_SetFieldValue/* ===================================================================*/void GPIO2_SetFieldValue(LDD_TDeviceData *DeviceDataPtr, LDD_GPIO_TBitField Field, GPIO2_TFieldValue Value){ (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ switch (Field) { /* no break */ case I2C_DAT: { /* bit field #0 */ GPIO_PDD_SetPortDataOutput(GPIO2_MODULE_BASE_ADDRESS, ( GPIO_PDD_GetPortDataOutput(GPIO2_MODULE_BASE_ADDRESS) & ((GPIO2_TPortValue)(~((GPIO2_TPortValue)GPIO2_I2C_DAT_MASK))) ) | ( ((GPIO2_TPortValue)(Value << GPIO2_I2C_DAT_START_BIT)) & ((GPIO2_TPortValue)GPIO2_I2C_DAT_MASK) ) ); break; } case I2C_CLK: { /* bit field #1 */ GPIO_PDD_SetPortDataOutput(GPIO2_MODULE_BASE_ADDRESS, ( GPIO_PDD_GetPortDataOutput(GPIO2_MODULE_BASE_ADDRESS) & ((GPIO2_TPortValue)(~((GPIO2_TPortValue)GPIO2_I2C_CLK_MASK))) ) | ( ((GPIO2_TPortValue)(Value << GPIO2_I2C_CLK_START_BIT)) & ((GPIO2_TPortValue)GPIO2_I2C_CLK_MASK) ) ); break; } default: break; /* Invalid Field is not treated, result is undefined */ } /* switch (Field) */}
开发者ID:geliang201201，项目名称:CO2_Sensor，代码行数:35，
示例2: BitsIoLdd2_GetBit/*** ===================================================================** Method : BitsIoLdd2_GetBit (component BitsIO_LDD)**** Description :** Returns the value of the specified bit/pin of the** Input/Output component. If the direction is [input] then it** reads the input value of the pin and returns it. If the** direction is [output] then it returns the last written value** (see <Safe mode> property for limitations).** Parameters :** NAME - DESCRIPTION** * DeviceDataPtr - Device data structure** pointer returned by <Init> method.** Bit - Bit/pin number to read** * BitVal - The returned value: ** <false> - logical "0" (Low level)** <true> - logical "1" (High level)** Returns :** --- - Error code, possible values:** ERR_OK - OK** ERR_PARAM_MASK - Invalid pin index** ERR_VALUE - Invalid output parameter** ===================================================================*/LDD_TError BitsIoLdd2_GetBit(LDD_TDeviceData *DeviceDataPtr, byte Bit, bool *BitVal){ uint32_t mask = 0; (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ /* Bit number value - this test can be disabled by setting the "Ignore range checking" property to the "yes" value in the "Configuration inspector" */ if (Bit > 3U) { return ERR_PARAM_MASK; } /* Bit value returned - this test can be disabled by setting the "Ignore range checking" property to the "yes" value in the "Configuration inspector" */ if (NULL == BitVal) { return ERR_VALUE; } mask = BitsIoLdd2_PIN_MASK_MAP[Bit]; if ((GPIO_PDD_GetPortDataOutput(BitsIoLdd2_MODULE_BASE_ADDRESS) & mask) != 0U) { *BitVal = (bool)TRUE; } else { *BitVal = (bool)FALSE; } return ERR_OK;}
开发者ID:kufi，项目名称:pren19-eruca-prenbot，代码行数:54，
示例3: BitIoLdd2_GetVal/* ===================================================================*/bool BitIoLdd2_GetVal(LDD_TDeviceData *DeviceDataPtr){ uint32_t PortData; /* Port data masked according to the bit used */ (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ PortData = GPIO_PDD_GetPortDataOutput(BitIoLdd2_MODULE_BASE_ADDRESS) & BitIoLdd2_PORT_MASK; return (PortData != 0U) ? (bool)TRUE : (bool)FALSE;}
开发者ID:thihaElec，项目名称:my-git，代码行数:9，
示例4: BitsIoLdd2_GetVal/*** ===================================================================** Method : BitsIoLdd2_GetVal (component BitsIO_LDD)**** Description :** Returns the value of the Input/Output component. If the** direction is [input] then reads the input value of the pins** and returns it. If the direction is [output] then returns** the last written value (see <Safe mode> property for** limitations).** Parameters :** NAME - DESCRIPTION** * DeviceDataPtr - Device data structure** pointer returned by <Init> method.** Returns :** --- - Input value** ===================================================================*/dword BitsIoLdd2_GetVal(LDD_TDeviceData *DeviceDataPtr){ dword portData; (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ portData = GPIO_PDD_GetPortDataOutput(BitsIoLdd2_MODULE_BASE_ADDRESS) & BitsIoLdd2_PORT_MASK; return portData >> BitsIoLdd2_PIN_ALLOC_0_INDEX; /* Return port data shifted with the offset of the first allocated pin*/}
开发者ID:kufi，项目名称:pren19-eruca-prenbot，代码行数:29，
示例5: BitIoLdd4_GetVal/* ===================================================================*/bool BitIoLdd4_GetVal(LDD_TDeviceData *DeviceDataPtr){ uint32_t PortData; /* Port data masked according to the bit used */ (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ if ((GPIO_PDD_GetPortDirection(BitIoLdd4_MODULE_BASE_ADDRESS) & BitIoLdd4_PORT_MASK) == 0U) { /* Port is configured as input */ PortData = GPIO_PDD_GetPortDataInput(BitIoLdd4_MODULE_BASE_ADDRESS) & BitIoLdd4_PORT_MASK; } else { /* Port is configured as output */ PortData = GPIO_PDD_GetPortDataOutput(BitIoLdd4_MODULE_BASE_ADDRESS) & BitIoLdd4_PORT_MASK; } return (PortData != 0U) ? (bool)TRUE : (bool)FALSE;}
开发者ID:psh117，项目名称:Jack-Spherobot，代码行数:15，
示例6: BitsIoLdd4_PutVal/*** ===================================================================** Method : BitsIoLdd4_PutVal (component BitsIO_LDD)**** Description :** Specified value is passed to the Input/Output component. If** the direction is [input] saves the value to a memory or a** register, this value will be written to the pins after** switching to the output mode - using [SetDir(TRUE)] (see** <Safe mode> property for limitations). If the direction is** [output] it writes the value to the pins. (Method is** available only if the Direction = _[output]_ or** _[input/output]_).** Parameters :** NAME - DESCRIPTION** * DeviceDataPtr - Device data structure** pointer returned by <Init> method.** Val - Output value** Returns : Nothing** ===================================================================*/void BitsIoLdd4_PutVal(LDD_TDeviceData *DeviceDataPtr, dword Val){ /* Store the raw value of the port, set according to the offset of the first allocated pin */ dword rawVal; (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ /* Calculate the raw data to be set (i.e. shifted to left according to the first allocated pin) */ rawVal = (Val & BitsIoLdd4_PORT_VALID_VALUE_MASK) << BitsIoLdd4_PIN_ALLOC_0_INDEX; /* Mask and shift output value */ /* Set port data by toggling the different bits only */ GPIO_PDD_TogglePortDataOutputMask(BitsIoLdd4_MODULE_BASE_ADDRESS, (GPIO_PDD_GetPortDataOutput(BitsIoLdd4_MODULE_BASE_ADDRESS) ^ rawVal) & BitsIoLdd4_PORT_MASK);}
开发者ID:kufi，项目名称:pren19-eruca-prenbot，代码行数:35，
示例7: BitsIoLdd4_GetVal/*** ===================================================================** Method : BitsIoLdd4_GetVal (component BitsIO_LDD)**** Description :** Returns the value of the Input/Output component. If the** direction is [input] then reads the input value of the pins** and returns it. If the direction is [output] then returns** the last written value (see <Safe mode> property for** limitations).** Parameters :** NAME - DESCRIPTION** * DeviceDataPtr - Device data structure** pointer returned by <Init> method.** Returns :** --- - Input value** ===================================================================*/dword BitsIoLdd4_GetVal(LDD_TDeviceData *DeviceDataPtr){ dword portData; (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ if ((GPIO_PDD_GetPortDirection(BitsIoLdd4_MODULE_BASE_ADDRESS) & BitsIoLdd4_PORT_MASK) != 0U) { /* port is configured as output */ portData = GPIO_PDD_GetPortDataOutput(BitsIoLdd4_MODULE_BASE_ADDRESS) & BitsIoLdd4_PORT_MASK; } else { /* port is configured as input */ portData = GPIO_PDD_GetPortDataInput(BitsIoLdd4_MODULE_BASE_ADDRESS) & BitsIoLdd4_PORT_MASK; } return portData >> BitsIoLdd4_PIN_ALLOC_0_INDEX; /* Return port data shifted with the offset of the first allocated pin*/}
开发者ID:kufi，项目名称:pren19-eruca-prenbot，代码行数:34，
示例8: LEDRed_SetFieldValue/* ===================================================================*/void LEDRed_SetFieldValue(LDD_TDeviceData *DeviceDataPtr, LDD_GPIO_TBitField Field, LEDRed_TFieldValue Value){ (void)DeviceDataPtr; /* Parameter is not used, suppress unused argument warning */ switch (Field) { /* no break */ case LED_RED: { /* bit field #0 */ GPIO_PDD_SetPortDataOutput(LEDRed_MODULE_BASE_ADDRESS, ( GPIO_PDD_GetPortDataOutput(LEDRed_MODULE_BASE_ADDRESS) & ((LEDRed_TPortValue)(~((LEDRed_TPortValue)LEDRed_LED_RED_MASK))) ) | ( ((LEDRed_TPortValue)(Value << LEDRed_LED_RED_START_BIT)) & ((LEDRed_TPortValue)LEDRed_LED_RED_MASK) ) ); break; } default: break; /* Invalid Field is not treated, result is undefined */ } /* switch (Field) */}
开发者ID:SeismicPi，项目名称:SeismicPi，代码行数:22，
注：本文中的GPIO_PDD_GetPortDataOutput函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ GPIO_PDOR_PDO函数代码示例
C++ GPIO_PDD_ClearPortDataOutputMask函数代码示例 |
