这篇教程C++ GPIO_PDOR_PDO函数代码示例写得很实用，希望能帮到您。
本文整理汇总了C++中GPIO_PDOR_PDO函数的典型用法代码示例。如果您正苦于以下问题：C++ GPIO_PDOR_PDO函数的具体用法？C++ GPIO_PDOR_PDO怎么用？C++ GPIO_PDOR_PDO使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。 在下文中一共展示了GPIO_PDOR_PDO函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。 示例1: switchint DigitalOutputPin::Status(){ int ret = 0; switch( GPIOPorts[ (int)pin ] ) { case PortA: { ret = GPIOA_PDOR & GPIO_PDOR_PDO( GPIO_PIN( GPIOPinNumbers[ (int)pin ] ) ); break; } case PortB: { ret = GPIOB_PDOR & GPIO_PDOR_PDO( GPIO_PIN( GPIOPinNumbers[ (int)pin ] ) ); break; } case PortC: { ret = GPIOC_PDOR & GPIO_PDOR_PDO( GPIO_PIN( GPIOPinNumbers[ (int)pin ] ) ); break; } case PortD: { ret = GPIOD_PDOR & GPIO_PDOR_PDO( GPIO_PIN( GPIOPinNumbers[ (int)pin ] ) ); break; } case PortE: { ret = GPIOE_PDOR & GPIO_PDOR_PDO( GPIO_PIN( GPIOPinNumbers[ (int)pin ] ) ); break; } } return ret;}
开发者ID:fishbein16，项目名称:C2_Robot，代码行数:33，
示例2: LCD_WrDatvoid LCD_WrDat(u8 data){ u8 i=8; //LCD_CS=0;;// GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(15));;;; GPIOA_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(16));;;; asm("nop"); // GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(12));;;; GPIOE_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(25));;;; asm("nop"); while(i--) {// if(data&0x80){GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(13));;;;} if(data&0x80){GPIOE_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(24));;;;}// else{GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(13));;;;} else{GPIOE_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(24));;;;}// GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(12)); GPIOE_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(25)); asm("nop");;;; //asm("nop"); // GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(12));;;;; GPIOE_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(25));;;;; data<<=1; } //LCD_CS=1;}
开发者ID:YoshimiSakuka，项目名称:K10，代码行数:26，
示例3: LCD_WrCmdvoid LCD_WrCmd(u8 cmd){ u8 i=8; //LCD_CS=0;;// GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(15));;;;;// GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(12));;;;; GPIOA_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(16));;;;; GPIOE_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(25));;;;; //asm("nop"); while(i--) {// if(cmd&0x80){GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(13));;;;;} if(cmd&0x80){GPIOE_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(24));;;;;}// else{GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(13));;;;;;} else{GPIOE_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(24));;;;;;}// GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(12));;;;; GPIOE_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(25));;;;; asm("nop");;;; //asm("nop"); // GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(12));;;;; GPIOE_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(25));;;;; cmd<<=1;;;;; } //LCD_CS=1;}
开发者ID:YoshimiSakuka，项目名称:K10，代码行数:26，
示例4: leds_arch_init/*---------------------------------------------------------------------------*/voidleds_arch_init(void){ /** * Initialize blue led */ /* Configure pin as output */ GPIOD_PDDR |= GPIO_PDDR_PDD(0x02); /* Set initialization value */ GPIOD_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x02)); /* Initialization of Port Control register */ PORTD_PCR1 = (uint32_t)((PORTD_PCR1 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /** * Initialize green led */ /* Configure pin as output */ GPIOB_PDDR |= GPIO_PDDR_PDD(0x00080000); /* Set initialization value */ GPIOB_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x00080000)); /* Initialization of Port Control register */ PORTB_PCR19 = (uint32_t)((PORTB_PCR19 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /** * Initialize red led */ /* Configure pin as output */ GPIOB_PDDR |= GPIO_PDDR_PDD(0x00040000); /* Set initialization value */ GPIOB_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x00040000)); /* Initialization of Port Control register */ PORTB_PCR18 = (uint32_t)((PORTB_PCR18 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); }
开发者ID:AlexanderWiniger，项目名称:kinetis-mote，代码行数:49，
示例5: LEDRed_Init/* ===================================================================*/LDD_TDeviceData* LEDRed_Init(LDD_TUserData *UserDataPtr){ /* Allocate LDD device structure */ LEDRed_TDeviceData *DeviceDataPrv; /* {Default RTOS Adapter} Driver memory allocation: Dynamic allocation is simulated by a pointer to the static object */ DeviceDataPrv = &DeviceDataPrv__DEFAULT_RTOS_ALLOC; /* Save RTOS Device structure */ DeviceDataPrv->UserData = UserDataPtr; /* Store the RTOS device structure */ /* Enable device clock gate */ /* SIM_SCGC5: PORTC=1 */ SIM_SCGC5 |= SIM_SCGC5_PORTC_MASK; /* GPIOC_PDOR: PDO|=0x0200 */ GPIOC_PDOR |= GPIO_PDOR_PDO(0x0200); /* GPIOC_PDDR: PDD|=0x0200 */ GPIOC_PDDR |= GPIO_PDDR_PDD(0x0200); /* Initialization of pin routing */ /* PORTC_PCR9: ISF=0,MUX=1 */ PORTC_PCR9 = (uint32_t)((PORTC_PCR9 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_LEDRed_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:SeismicPi，项目名称:SeismicPi，代码行数:29，
示例6: TraccionTrasera_Direccion_Init/* ===================================================================*/LDD_TDeviceData* TraccionTrasera_Direccion_Init(LDD_TUserData *UserDataPtr){ /* Allocate device structure */ TraccionTrasera_Direccion_TDeviceDataPtr DeviceDataPrv; /* {FreeRTOS RTOS Adapter} Driver memory allocation: RTOS function call is defined by FreeRTOS RTOS Adapter property */ DeviceDataPrv = (TraccionTrasera_Direccion_TDeviceData *)pvPortMalloc(sizeof(TraccionTrasera_Direccion_TDeviceData)); #if FreeRTOS_CHECK_MEMORY_ALLOCATION_ERRORS if (DeviceDataPrv == NULL) { return (NULL); } #endif DeviceDataPrv->UserDataPtr = UserDataPtr; /* Store the RTOS device structure */ /* Configure pin as output */ /* GPIOE_PDDR: PDD|=8 */ GPIOE_PDDR |= GPIO_PDDR_PDD(0x08); /* Set initialization value */ /* GPIOE_PDOR: PDO&=~8 */ GPIOE_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x08)); /* Initialization of Port Control register */ /* PORTE_PCR3: ISF=0,MUX=1 */ PORTE_PCR3 = (uint32_t)((PORTE_PCR3 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_TraccionTrasera_Direccion_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:francodemare，项目名称:RoboTito，代码行数:32，
示例7: BitIoLdd4_Init/* ===================================================================*/LDD_TDeviceData* BitIoLdd4_Init(LDD_TUserData *UserDataPtr){ /* Allocate device structure */ BitIoLdd4_TDeviceDataPtr DeviceDataPrv; /* {Default RTOS Adapter} Driver memory allocation: Dynamic allocation is simulated by a pointer to the static object */ DeviceDataPrv = &DeviceDataPrv__DEFAULT_RTOS_ALLOC; DeviceDataPrv->UserDataPtr = UserDataPtr; /* Store the RTOS device structure */ /* Enable device clock gate */ /* SIM_SCGC5: PORTD=1 */ SIM_SCGC5 |= SIM_SCGC5_PORTD_MASK; /* Configure pin as output */ /* GPIOD_PDDR: PDD|=8 */ GPIOD_PDDR |= GPIO_PDDR_PDD(0x08); /* Set initialization value */ /* GPIOD_PDOR: PDO&=~8 */ GPIOD_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x08)); /* Initialization of pin routing */ /* PORTD_PCR3: ISF=0,MUX=1 */ PORTD_PCR3 = (uint32_t)((PORTD_PCR3 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_BitIoLdd4_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:psh117，项目名称:Jack-Spherobot，代码行数:30，
示例8: GPIO2_Init/* ===================================================================*/LDD_TDeviceData* GPIO2_Init(LDD_TUserData *UserDataPtr){ /* Allocate LDD device structure */ GPIO2_TDeviceData *DeviceDataPrv; /* {Default RTOS Adapter} Driver memory allocation: Dynamic allocation is simulated by a pointer to the static object */ DeviceDataPrv = &DeviceDataPrv__DEFAULT_RTOS_ALLOC; /* Save RTOS Device structure */ DeviceDataPrv->UserData = UserDataPtr; /* Store the RTOS device structure */ /* GPIOE_PDOR: PDO|=0x000C0000 */ GPIOE_PDOR |= GPIO_PDOR_PDO(0x000C0000); /* GPIOE_PDDR: PDD|=0x000C0000 */ GPIOE_PDDR |= GPIO_PDDR_PDD(0x000C0000); /* Initialization of Port Control registers */ /* PORTE_PCR18: ISF=0,MUX=1 */ PORTE_PCR18 = (uint32_t)((PORTE_PCR18 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /* PORTE_PCR19: ISF=0,MUX=1 */ PORTE_PCR19 = (uint32_t)((PORTE_PCR19 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_GPIO2_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:geliang201201，项目名称:CO2_Sensor，代码行数:33，
示例9: BitIoLdd2_Init/* ===================================================================*/LDD_TDeviceData* BitIoLdd2_Init(LDD_TUserData *UserDataPtr){ /* Allocate device structure */ BitIoLdd2_TDeviceDataPtr DeviceDataPrv; /* {Default RTOS Adapter} Driver memory allocation: Dynamic allocation is simulated by a pointer to the static object */ DeviceDataPrv = &DeviceDataPrv__DEFAULT_RTOS_ALLOC; DeviceDataPrv->UserDataPtr = UserDataPtr; /* Store the RTOS device structure */ /* Configure pin as output */ /* GPIOB_PDDR: PDD|=0x0200 */ GPIOB_PDDR |= GPIO_PDDR_PDD(0x0200); /* Set initialization value */ /* GPIOB_PDOR: PDO&=~0x0200 */ GPIOB_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x0200)); /* Initialization of Port Control register */ /* PORTB_PCR9: ISF=0,MUX=1 */ PORTB_PCR9 = (uint32_t)((PORTB_PCR9 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_BitIoLdd2_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:thihaElec，项目名称:my-git，代码行数:27，
示例10: cam_startvoid cam_start() { // call pwm driver to start camera clock (CLK) for a 5% duty cycle FTM2_CNT = 0; FTM2_C0V = 45; // set cam flag cam_flag = EXEC_FLAG_UP; // set SI pulse high GPIOA_PSOR |= GPIO_PDOR_PDO(GPIO_PIN(14)); // enable interrupt enable_irq(64);}
开发者ID:kchapdaily，项目名称:alfc，代码行数:14，
示例11: uxParTestGetLEDunsigned portBASE_TYPE uxParTestGetLED( unsigned portBASE_TYPE uxLED ){unsigned portBASE_TYPE uxReturn = pdFALSE; if( uxLED < partstNUM_LEDs ) { portENTER_CRITICAL(); { uxReturn = !(GPIOA_PDOR & GPIO_PDOR_PDO(GPIO_PIN(10))); } portEXIT_CRITICAL(); } return uxReturn;}
开发者ID:LouisMo，项目名称:New-Balance-Program-Structure，代码行数:15，
示例12: GPIO1_Init/* ===================================================================*/LDD_TDeviceData* GPIO1_Init(LDD_TUserData *UserDataPtr){ /* Allocate LDD device structure */ GPIO1_TDeviceData *DeviceDataPrv; /* {MQXLite RTOS Adapter} Driver memory allocation: Dynamic allocation is simulated by a pointer to the static object */ DeviceDataPrv = &DeviceDataPrv__DEFAULT_RTOS_ALLOC; /* Save RTOS Device structure */ DeviceDataPrv->UserData = UserDataPtr; /* Store the RTOS device structure */ /* GPIOB_PDOR: PDO&=~0x00200000 */ GPIOB_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x00200000)); /* GPIOB_PDDR: PDD|=0x00200000 */ GPIOB_PDDR |= GPIO_PDDR_PDD(0x00200000); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_GPIO1_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:51104271，项目名称:CW_FRDM-KE06Z，代码行数:18，
示例13: BitIO_UPRDY_Init/* ===================================================================*/LDD_TDeviceData* BitIO_UPRDY_Init(LDD_TUserData *UserDataPtr){ /* Configure pin as output */ /* GPIOE_PDDR: PDD|=0x20000000 */ GPIOE_PDDR |= GPIO_PDDR_PDD(0x20000000); /* Set initialization value */ /* GPIOE_PDOR: PDO|=0x20000000 */ GPIOE_PDOR |= GPIO_PDOR_PDO(0x20000000); /* Initialization of Port Control register */ /* PORTE_PCR29: ISF=0,MUX=1 */ PORTE_PCR29 = (uint32_t)((PORTE_PCR29 & (uint32_t)~(uint32_t)( PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x06) )) | (uint32_t)( PORT_PCR_MUX(0x01) )); return ERR_OK;}
开发者ID:wishinsoul，项目名称:semg_mkl25z128vlh4，代码行数:19，
示例14: MB_DTR_Init/* ===================================================================*/LDD_TDeviceData* MB_DTR_Init(LDD_TUserData *UserDataPtr){ /* Allocate device structure */ MB_DTR_TDeviceDataPtr DeviceDataPrv; /* {MQXLite RTOS Adapter} Driver memory allocation: Dynamic allocation is simulated by a pointer to the static object */ DeviceDataPrv = &DeviceDataPrv__DEFAULT_RTOS_ALLOC; DeviceDataPrv->UserDataPtr = UserDataPtr; /* Store the RTOS device structure */ /* Configure pin as output */ /* GPIOA_PDDR: PDD|=0x20000000 */ GPIOA_PDDR |= GPIO_PDDR_PDD(0x20000000); /* Set initialization value */ /* GPIOA_PDOR: PDO&=~0x20000000 */ GPIOA_PDOR &= (uint32_t)~(uint32_t)(GPIO_PDOR_PDO(0x20000000)); /* Registration of the device structure */ PE_LDD_RegisterDeviceStructure(PE_LDD_COMPONENT_MB_DTR_ID,DeviceDataPrv); return ((LDD_TDeviceData *)DeviceDataPrv);}
开发者ID:51104271，项目名称:CW_FRDM-KE06Z，代码行数:19，
示例15: cam_isrvoid cam_isr() { // clear interrupt flag FTM2_C0SC; FTM2_C0SC &= ~(0x80u); // send SI low GPIOA_PCOR |= GPIO_PDOR_PDO(GPIO_PIN(14)); // run ADC on data input for 128 pixels if (cam_clockCounter < 128) { cam_clockCounter++; adc_start(); } else { // disable interrupt disable_irq(64); cam_clockCounter = 0; FTM2_C0V = 0; cam_flag = EXEC_FLAG_DOWN; } }
开发者ID:kchapdaily，项目名称:alfc，代码行数:21，
示例16: SPI_CS_assert/********************************************************** Name: SPI_CS_assert* Desc: Change SPI_CS pin state* Parameter: expected state* Return: None**********************************************************/void SPI_CS_assert(uint_8 state){ /*Body*/ GPIOE_PDDR |= GPIO_PDDR_PDD(4); GPIOE_PDOR |= GPIO_PDOR_PDO(state);}/*EndBody*/
开发者ID:Adilla，项目名称:openwsn-fw，代码行数:12，
示例17: LCD_Init_Oledvoid LCD_Init_Oled(void) { //设置PORTA pin14,pin15为GPIO口 // PORTC_PCR12=(0|PORT_PCR_MUX(1));// PORTC_PCR13=(0|PORT_PCR_MUX(1)); // PORTC_PCR14=(0|PORT_PCR_MUX(1));// PORTC_PCR15=(0|PORT_PCR_MUX(1)); PORTE_PCR24=(0|PORT_PCR_MUX(1)); PORTA_PCR14=(0|PORT_PCR_MUX(1)); PORTE_PCR25=(0|PORT_PCR_MUX(1)); PORTA_PCR16=(0|PORT_PCR_MUX(1)); //设置PORTA pin14,pin15为输出方向;pin16,pin17为输入方向// GPIOC_PDDR=GPIO_PDDR_PDD(GPIO_PIN(12)|GPIO_PIN(13)|GPIO_PIN(14)|GPIO_PIN(15)); GPIOA_PDDR=GPIO_PDDR_PDD(GPIO_PIN(14)|GPIO_PIN(16)); GPIOE_PDDR=GPIO_PDDR_PDD(GPIO_PIN(24)|GPIO_PIN(25));// GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(12));// //LCD_CS=1; //预制SLK和SS为高电平 // // GPIOC_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(14));// LCD_DLY_ms(50);// GPIOC_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(14)); GPIOE_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(25)); //LCD_CS=1; //预制SLK和SS为高电平 GPIOA_PDOR &= ~GPIO_PDOR_PDO(GPIO_PIN(14)); LCD_DLY_ms(50); GPIOA_PDOR |= GPIO_PDOR_PDO(GPIO_PIN(14)); LCD_WrCmd(0xae);//--turn off oled panel LCD_WrCmd(0x00);//---set low column address LCD_WrCmd(0x10);//---set high column address LCD_WrCmd(0x40);//--set start line address Set Mapping RAM Display Start Line (0x00~0x3F) LCD_WrCmd(0x81);//--set contrast control register LCD_WrCmd(0xcf); // Set SEG Output Current Brightness LCD_WrCmd(0xa1);//--Set SEG/Column Mapping 0xa0左右反置 0xa1正常 LCD_WrCmd(0xc8);//Set COM/Row Scan Direction 0xc0上下反置 0xc8正常 LCD_WrCmd(0xa6);//--set normal display LCD_WrCmd(0xa8);//--set multiplex ratio(1 to 64) LCD_WrCmd(0x3f);//--1/64 duty LCD_WrCmd(0xd3);//-set display offset Shift Mapping RAM Counter (0x00~0x3F) LCD_WrCmd(0x00);//-not offset LCD_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency LCD_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec LCD_WrCmd(0xd9);//--set pre-charge period LCD_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock LCD_WrCmd(0xda);//--set com pins hardware configuration LCD_WrCmd(0x12); LCD_WrCmd(0xdb);//--set vcomh LCD_WrCmd(0x40);//Set VCOM Deselect Level LCD_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02) LCD_WrCmd(0x02);// LCD_WrCmd(0x8d);//--set Charge Pump enable/disable LCD_WrCmd(0x14);//--set(0x10) disable LCD_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5) LCD_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7) LCD_WrCmd(0xaf);//--turn on oled panel LCD_Fill(0x00); //初始清屏 LCD_Set_Pos(0,0); }
开发者ID:YoshimiSakuka，项目名称:K10，代码行数:63，
注：本文中的GPIO_PDOR_PDO函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。
C++ GPIO_PIN函数代码示例
C++ GPIO_PDD_GetPortDataOutput函数代码示例 |
